Preparation and Properties of Biodegradable Foams

Foam extrusion of biodegradable polyester [poly(butylene adipate-co-terephthalate) (PBAT)] and its blends with maleated thermoplastic starch (MTPS) using a chemical blowing agent was performed. The effect of MTPS and percentage of chemical blowing agent on various foam properties is discussed. In general, an increased amount of PBAT in the foams improves the properties of the foams. The foam samples were characterized by measurements of density, expansion ratio, specific length, compressive strength, resiliency, moisture sorption, and imaging using digital light microscopy. Density, expansion ratio, and specific length measurements show that the best characteristics of lowest density, highest expansion ratio, and highest specific length are exhibited by the PBAT samples. The compressive strength and foam density exhibit a power-law relationship. Greater amounts of PBAT in the samples increase the resiliency and decrease the steady state weight gain during moisture sorption. All samples show regions of unfoamed material when only 3% chemical blowing agent is used, but when 5 and 7% chemical blowing agent is used, the samples exhibit cells throughout the matrix.     

Adaptation potential of ecosystem-based management to climate change in the eastern Canadian boreal forest

Ecosystem-based management (EBM) of forests is gaining acceptance for its focus on the maintenance of the long-term integrity of ecosystem processes, but climate change challenges this view because of its impacts on these very processes. We have therefore evaluated the robustness of EBM to projected climate change, considering the role of climate on forest growth and fire regime in a boreal forest of eastern Canada. A climate sensitive growth index model was calibrated for three commercial species and used to project the evolution of merchantable volume for two climate scenarios (B1 and A2) under conventional and EBM strategies. Current burn rate and burn rates under future climate scenarios were also considered. Under the most extreme projected climate scenario, the periodic timber supply could be reduced by up to 79% through direct (growth reduction) and indirect (fire) effects. However, ecological indicators show that EBM is a more robust forest management strategy than conventional one demonstrating its adaptation potential to climate change at least in the short term.     

Catalytic activities of ultra-small β-FeOOH nanorods in ozonation of 4-chlorophenol

We report the catalytic properties of ultra-small β-FeOOH nanorods in ozonation of 4-chlorophenol (4-CP). XRD, TEM, EDS, SAED, FTIR and BET were used to characterize the prepared material. Interaction between O₃ and β-FeOOH was evident from the FTIR spectra. The removal efficiency of 4-CP was significantly enhanced in the presence of β-FeOOH compared to ozone alone. Removal efficiency of 99% and 67% was achieved after 40 min in the presence of combined ozone and catalyst and ozone only, respectively. Increasing catalyst load increased COD removal efficiency. Maximum COD removal of 97% was achieved using a catalyst load of 0.1 g/100 mL of 4-CP solution. Initial 4-CP concentration was not found to be rate limiting below 2 × 10^− 3 mol/L. The catalytic properties of the material during ozonation process were found to be pronounced at lower initial pH of 3.5. Two stage first order kinetics was applied to describe the kinetic behavior of the nanorods at low pH. The first stage of catalytic ozonation was attributed to the heterogeneous surface breakdown of O₃ by β-FeOOH, while the second stage was attributed to homogeneous catalysis initiated by reductive dissolution of β-FeOOH at low pH.     

Butyltins in the sediments of Kochi and Mumbai harbours, west coast of India

Surface sediment samples were collected from various locations in the Mumbai and Kochi harbours, west coast of India, to assess the presence of butyltin compounds. Tributyltin (TBT) and dibutyltin (DBT) varied from 16 to 16,816 ng/g dry wt. and from undetected to 469 ng/g dry wt., respectively, of the sediment in Kochi harbour. In Mumbai harbour, the values of TBT and DBT ranged between 4.5 and 1193 ng/g dry wt. and from undetected to 131 ng/g dry wt. of the sediments, respectively. The concentrations of both TBT and DBT showed strong seasonal variation probably due to the effect of tides and currents. Nevertheless, the levels of butyltin compounds were generally higher at sites influenced by shipping activities such as navigation, dry dock and ship-building activities. The presence of DBT indicates the abiotic or microbiological degradation of TBT. Compared to TBT, DBT was relatively less abundant, suggesting either fresh inputs of TBT and/or less degradation of TBT. The concentrations of TBT showed significant positive relationships with organic carbon and lipid, implying that both lipophilic and ionic interactions were probably involved in controlling the abundance of TBT at these sediments. The observed levels of butyltin compounds are much higher than those required to induce toxic effects on marine organisms, suggesting that these sediments were contaminated with butyltin compounds.     

Fuzzy rule-based modelling for human health risk from naturally occurring radioactive materials in produced water

Produced water, discharged from offshore oil and gas operations, contains chemicals from formation water, condensed water, and any chemical added down hole or during the oil/water separation process. Although, most of the contaminants fall below the detection limits within a short distance from the discharge port, a few of the remaining contaminants including naturally occurring radioactive materials (NORM) are of concern due to their bioavailability in the media and bioaccumulation characteristics in finfish and shellfish species used for human consumption. In the past, several initiatives have been taken to model human health risk from NORM in produced water. The parameters of the available risk assessment models are imprecise and sparse in nature. In this study, a fuzzy possibilistic evaluation using fuzzy rule based modeling has been presented. Being conservative in nature, the possibilistic approach considers possible input parameter values; thus provides better environmental prediction than the Monte Carlo (MC) calculation. The uncertainties of the input parameters were captured with fuzzy triangular membership functions (TFNs). Fuzzy if-then rules were applied for input concentrations of two isotopes of radium, namely (226)Ra, and (228)Ra, available in produced water and bulk dilution to evaluate the radium concentration in fish tissue used for human consumption. The bulk dilution was predicted using four input parameters: produced water discharge rate, ambient seawater velocity, depth of discharge port and density gradient. The evaluated cancer risk shows compliance with the regulatory guidelines; thus minimum risk to human health is expected from NORM components in produced water.     

Complete degradation of di-n-octyl phthalate by Gordonia sp. strain Dop5

The present study describes the assimilation of di-n-octyl phthalate by an aerobic bacterium, isolated from municipal waste-contaminated soil sample utilizing di-n-octyl phthalate as the sole source of carbon and energy. The isolate was identified as Gordonia sp. based on the morphological, nutritional and biochemical characteristics as well as 16S rRNA gene sequence analysis. A combination of chromatographic and spectrometric analyses revealed a complete di-n-octyl assimilation pathway. In the degradation process, mono-n-octyl phthalate, phthalic acid, protocatechuic acid and 1-octanol were identified as the degradation products of di-n-octyl phthalate. Furthermore, phthalic acid was metabolized via protocatechuic acid involving protocatechuate 3,4-dioxygenase while 1-octanol was metabolized by NAD⁺-dependent dehydrogenases to 1-octanoic acid, which was subsequently degraded via β-oxidation, ultimately, leading to tricarboxylic acid cycle intermediates. Apart from phthalic acid and 1-octanol metabolizing pathway enzymes, two esterases, di-n-octyl phthalate hydrolase and mono-n-octyl phthalate hydrolase involved in di-n-octyl phthalate degradation were found to be inducible in nature. This is the first report on the metabolic pathway involved in the complete degradation of di-n-octyl phthalate by a single bacterial isolate, which is also capable of efficiently degrading other phthalate esters of environmental concern having either shorter or longer alkyl chains.     

Underwater treatment of lead-contaminated sediment

The sediment associated with the reconstruction of a bridge pier was classifiable as hazardous by the Toxicity Characteristic Leaching Procedure (TCLP), due to elevated concentrations of lead. However, RCRA regulations do not classify the sediment as hazardous unless it is moved. RMT designed an in-situ, underwater treatment process to render the sediment nonhazardous, using phosphate-based chemistry before dredging. Subsequent sediment management was conducted without the additional regulatory requirements and costs associated with managing hazardous waste.     

COMPARING SOME METHODS OF ESTIMATING MEAN AREAL RAINFALL1

ABSTRACT: A comparison of 13 different methods of estimating mean areal rainfall was made on two areas in New Mexico, U.S.A., and one area in Great Britain. Daily, monthly and yearly rainfall data were utilized. All methods, in general, yielded comparable estimates, especially for yearly values. This suggested that a simpler method would be preferable for estimating mean areal rainfall in these areas.     

Comparative studies on biomass productivity and lipid content of a novel blue-green algae during autotrophic and heterotrophic growth

Environmental Science and Pollution Research - Algae have long been acclaimed as the attractive renewable source for generating third-generation biofuels, particularly biodiesel. Under the present...