Selenium assimilation and loss by an insect predator and its relationship to Se subcellular partitioning in two prey types

Subcellular selenium (Se) distributions in the oligochaete Tubifex tubifex and in the insect Chironomus riparius did not vary with Se exposure duration, which was consistent with the observations that the duration of prey Se exposure had little influence on either Se assimilation or loss by a predatory insect (the alderfly Sialis velata). However, these two prey types differed in how Se was distributed in their cells. Overall, the predator assimilated a mean of 66% of the Se present in its prey, which was similar to the mean percentage of Se in prey cells (62%) that was theoretically available for uptake (that is, Se in the protein and organelle fractions). Likewise, data for cadmium, nickel and thallium suggest that predictions of trace element transfer between prey and predator are facilitated by considering the subcellular partitioning of these contaminants in prey cells.     

Seasonal variations of monosaccharide anhydrides in PM1 and PM2.5 aerosol in urban areas

The concentrations of monosaccharide anhydrides (levoglucosan, mannosan, galactosan) in PM1 and PM2.5 aerosol samples were measured in Brno and ?lapanice in the Czech Republic in winter and summer 2009. 56 aerosol samples were collected together at both sites to investigate the different sources that contribute to aerosol composition in studied localities. Daily PM1 and PM2.5 aerosol samples were collected on pre-fired quartz fibre filters.The sum of average atmospheric concentration of levoglucosan, mannosan and galactosan in PM1 aerosol in ?lapanice and Brno during winter was 513 and 273 ng m^?3, while in summer the sum of average atmospheric concentration of monosaccharide anhydrides (MAs) was 42 and 38 ng m^?3, respectively. The sum of average atmospheric concentration of MAs in PM1 aerosol formed 71 and 63% of the sum of MA concentration in PM2.5 aerosol collected in winter in ?lapanice and Brno, whereas in summer the sum of average atmospheric concentration of MAs in PM1 aerosol formed 45 and 43% of the sum of MA concentration in PM2.5 aerosol in ?lapanice and Brno, respectively.In winter, the sum of MAs contributed significantly to PM1 mass ranging between 1.37% and 2.67% of PM1 mass (Brno – ?lapanice), while in summer the contribution of the sum of MAs was smaller (0.28–0.32%). Contribution of the sum of MAs to PM2.5 mass is similar both in winter (1.37–2.71%) and summer (0.44–0.55%).The higher concentrations of monosaccharide anhydrides in aerosols in ?lapanice indicate higher biomass combustion in this location than in Brno during winter season. The comparison of levoglucosan concentration in PM1 and PM2.5 aerosol shows prevailing presence of levoglucosan in PM1 aerosol both in winter (72% on average) and summer (60% on average).The aerosol samples collected in ?lapanice and Brno in winter and summer show comparable contributions of levoglucosan, mannosan and galactosan to the total amount of monosaccharide anhydrides in both aerosol size fractions. Levoglucosan was the most abundant monosaccharide anhydride with a relative average contribution to the total amount of MAs in the range of 71–82% for PM1 aerosols and 52–79% for PM2.5 aerosols.     

Evaluation of genotoxic variations in plant model systems in a case of metal stressors

This study was designed to assess the effects of long term, high metal exposition (cadmium, lead, copper, nickel and zinc) on DNA damage in four plant model systems [Taraxacum officinale (Asteraceae), Matricaria recutita L. (Asteraceae), Robinia pseudoacacia L. (Fabaceae), and Urtica dioica (Urticaceae)]. DNA stability was investigated by a Random Amplified Polymorphic DNA (RAPD) technique. Agarose-gel electrophoresis revealed total of 37 bands with different molecular weights ranging from 1250 to 5000 bp. It generated distinctive polymorphism value of 72.97% (27 bands) total in four plant species investigated. The dendrogram constructed using NTSYSpc programme showed that there is grouping in separate clusters of the same plant model collected from two different areas (metal-exposed and control samples). The study concluded that the long term metal-exposing periods had genotoxic stress on macromolecules of plant model systems investigated and biomarkers used should be augmented for reliable estimates of genotoxicity after exposure of plants to metal stressors.     

A mesocosm approach for detecting stream invertebrate community responses to treated wastewater effluent

The discharge of wastewater from sewage treatment plants is one of the most common forms of pollution to river ecosystems, yet the effects on aquatic invertebrate assemblages have not been investigated in a controlled experimental setting. Here, we use a mesocosm approach to evaluate community responses to exposure to different concentrations of treated wastewater effluents over a two week period. Multivariate analysis using Principal Response Curves indicated a clear, dose-effect response to the treatments, with significant changes in macroinvertebrate assemblages after one week when exposed to 30% effluent, and after two weeks in the 15% and 30% effluent treatments. Treatments were associated with an increase in nutrient concentrations (ammonium, sulfate, and phosphate) and reduction of dissolved oxygen. These findings indicate that exposure to wastewater effluent cause significant changes in abundance and composition of macroinvertebrate taxa and that effluent concentration as low as 5% can have detectable ecological effects.     

Application of molecularly imprinted and non-imprinted polymers for removal of emerging contaminants in water and wastewater treatment: a review

Over the past decade, several studies have reported trace levels of endocrine disrupting compounds, pharmaceuticals, and personal care products in surface waters, drinking water, and wastewater effluents. There has also been an increased concern about the ecological and human health impact of these contaminants, and their removal from water and wastewater has become a priority. Traditional treatment processes are limited in their ability to remove emerging contaminants from water, and there is a need for new technologies that are effective and feasible. This paper presents a review on recent research results on molecularly imprinted (MIP) and non-imprinted (NIP) polymers and evaluates their potential as a treatment method for the removal of emerging contaminants from water and wastewater. It also discusses the relative benefits and limitations of using MIP or NIP for water and wastewater treatment. MIP, and in particular NIP, offer promising applications for wastewater treatment, but their toxicity and possible health effects should be carefully studied before they are considered for drinking water treatment. More research is also required to determine how best to incorporate MIP and NIP in treatment plants.     

Corporate social responsibility and petroleum development in sub-Saharan Africa: The case of Chad

This paper contributes to the debate on governance, transparency and Corporate Social Responsibility (CSR) in oil-rich sub-Saharan Africa, focusing on the case of Chad. Over the past decade, Chad has gained international standing as an oil-producer on the back of the World Bank-catalyzed Chad–Cameroon pipeline project, which aims to develop the country's oil-rich Doba region. The analysis begins by examining at greater length the challenges to implementing a CSR agenda in fragile states such as Chad, highlighting, specifically, the barriers to facilitating development in environments exhibiting Dutch Disease-like symptoms. It subsequently critiques CSR programs in resource-rich developing countries, questioning the role of corporate intervention in such settings. The paper concludes by examining how CSR has been “operationalized” in Chad itself, where to ensure that the finances generated from the oil project are properly managed, the Bank instituted a comprehensive revenue management plan.     

Evaluation of an extraction method for a mixture of endocrine disrupters in sediment using chemical and in vitro biological analyses

Aquatic sediments are contaminated by a wide diversity of organic pollutants such as endocrine-disrupting chemicals (EDCs) which encompass a broad range of chemical classes having natural and anthropogenic origins. The use of in vitro bioassays is now widely accepted as an alternative method for their detection in complex samples. However, based on the diversity of EDC chemical properties, their common extraction is difficult and comprehensive validation of extraction methods for a bioanalysis purpose is still weakly documented. In this study, we compared the performance of several organic solvents, i.e., acetone, methanol, dichloromethane, heptane, dichloromethane/acetone (50:50, v/v), dichloromethane/methanol (50:50, v/v), heptane/acetone (50:50, v/v), and heptane/methanol (50:50, v/v), to extract a diversity of active chemicals from a spiked sediment matrix using pressurized liquid extraction. For this purpose, we defined a mixture of 12 EDCs with a wide range of polarity (2?<?log Kow?<?8) (i.e., estrone, 17β-estradiol, bisphenol A, o,p′DDT, 4-tert-octylphenol, fenofibrate, triphenyl phosphate, clotrimazole, PCB-126, 2,3,7,8 TCDD, benzo[k]fluoranthene, and dibenzo[a,h]anthracene). Working concentrations of each individual compound in the mixture were determined as equipotent concentrations on the basis of the concentration-addition (CA) model applied to in vitro estrogenic, dioxin-like, and pregnane X receptor (PXR)-like activities. Extraction efficiencies based on both chemical and biological analyses were assessed in triplicate in artificial blank sediment spiked with this mixture and in natural sediment contaminated by native EDCs. In both spiked and natural sediment, MeOH/DCM yields the best recovery while heptane was the least efficient solvent. Our study provided the validation of a sediment extraction methodology for EDC bioanalysis purposes, which can be used for comprehensive environmental contamination characterization.     

Influence of ozone pre-treatment on sludge anaerobic digestion: removal of pharmaceutical and personal care products

The effect of an oxidative pre-treatment with ozone on the removal of Pharmaceutical and Personal Care Products (PPCPs) during the anaerobic digestion of sewage sludge has been investigated. Besides, the digested sludge characteristics in terms of pathogens content, dewatering properties, heavy metals content and linear alkylbenzene sulfonates (LAS) were determined. During ozonation (20mg O(3)/g TSS), about 8% of volatile solids (VS) and 60% of the chemical oxygen demand (COD) were solubilized. However, no mineralization was observed. The elimination of VS and total COD during anaerobic digestion were not affected by ozone treatment with efficiencies ranging from 60% to 65%. All PPCPs considered were removed during anaerobic treatment of sludge, with efficiencies ranging from 20% to 99%. No significant influence of ozone pre-treatment was observed on PPCPs elimination except for carbamazepine. Pathogens, heavy metals and LAS contents after conventional and pre-ozonation treatment of sewage sludge were below the legal requirements. However, the dewatering properties of sludge were deteriorated when the ozone pre-treatment was applied.     

Use of sodium decanoate for selective precipitation of metals contained in industrial wastewater

Conventional methods for heavy metal removal from industrial wastewater involve a chemical precipitation. This process leads to sludges without any commercial value which are stored in specialized landfills. This paper describes a study on the possibility to perform selective precipitation of binary mixtures of metal cations using sodium decanoate. First, the solubility product of six metal decanoates is determined. These six compounds were prepared and controlled before determining their solubility in pure water at 20 degrees C. The solubility product K(sp) obtained for Cd, Cu, Mn, Ni, Pb and Zn decanoates are respectively 10(-11.69), 10(-14.65), 10(-10.16), 10(-9.17), 10(-16.05) and 10(-13.05). Additionally, the selective precipitation of binary mixtures was studied. Using pK(sp) values above, the solubility domain of each decanoate was established. The six superimposed curves allow prediction of the feasibility of separation. According to these curves, nine separations seem to be possible. In each case, precipitation was experimentally performed. The obtained results verify the reliability of this prediction tool. The feasibility of the selective precipitation of metal cations using sodium decanoate is clearly shown.     

Pathogen and indicator organism reduction through secondary effluent filtration: implications for reclaimed water production

The reduction of pathogens and indicator organisms through secondary effluent filtration was investigated at six full-scale treatment facilities, ranging in capacity from 0.04 to 1 m3/s (1 to 25 mgd). Grab samples were assayed for pathogens (cultivable enteric viruses, Giardia, and Cryptosporidium) and indicator organisms (coliforms, enterococci, Clostridium perfringens, and coliphages) quarterly under peak flow conditions from each facility over the course of 1 calendar year. Log10 removals resulting from filtration averaged 0.3 to 0.8 log10 for cultivable enteric viruses, 0.4 to 1.5 log10 for protozoan parasites, 0.01 to 3.7 log10 for indicator bacteria, and 0.3 to 1.1 log10 for coliphages. In addition to filter design (cloth, monomedium shallow- or deep-bed, or dual-media filters), differences in reduction of pathogens and indicators could be attributed to the combined effects of hydraulic loading rates, chemical addition practices, backwashing and postbackwashing operating strategies, and the effectiveness of upstream biological treatment and sedimentation.