Determination of lindane leachability in soil-biosolid systems and its bioavailability in wheat plants

The leachability of lindane from different biosolid amended soils was determined and compared to its bioavailability. Sand, soil, and a mixture of soil-sand (1:1 w/w) were spiked with lindane, blended with different amounts of biosolids, and subjected to a leaching process with water that lasted for 1-28 d. This procedure is in accordance with ISO/TS 21268-1: 2007. After these batch tests, lindane was extracted from the leachates using three different solvent-free microextraction techniques, including solid phase microextraction (SPME), stir-bar sorptive extraction (SBSE), and silicone rod extraction (SRE). The amount of lindane was determined with thermal desorption and gas chromatography coupled to mass spectrometry (GC-MS). The efficiencies of the three microextraction techniques were statistically different, and the efficiency could be related to the amount of polydimethylsiloxane (PDMS) in each extraction device. However, all of the techniques provide data that shows that the leachability of lindane is dependent on the amount of organic matter contained in the matrix.The results of the lindane leachability assay were compared to the bioavailability of lindane, which was determined by measuring the amount of lindane that accumulated in the roots of wheat plants grown in similar soil-biosolid systems.It was confirmed that the amount of organic matter in the matrix is a determining factor for lindane immobilization. The presence of biosolids decreases the mobility of lindane in all of the systems under study. Similarly, increasing biosolid concentrations in the soil significantly decreased the bioavailability of lindane and, consequently, plant absorption.The good correlation (R² = 0.997) between the leachability of lindane from the matrix and plant absorption of lindane indicates that the proposed biomimetic methodology can predict the bioavailability of lindane in a time period as short as 7 d.The results of this work confirm that amending contaminated soils with biosolids is beneficial for immobilizing lindane and helps prevent the percolation of lindane through the soil profile and into groundwater.     

Occurrence and distribution of organic trace substances in waters from the Three Gorges Reservoir, China

This study deals with the evaluation of water quality of the Three Gorges Reservoir (TGR) in order to assess its suitability as a raw water source for drinking water production. Therefore, water samples from (1) surface water, (2) tap water, and (3) wastewater treatment plant effluents were taken randomly by 2011–2012 in the area of the TGR and were analyzed for seven different organic contaminant groups (207 substances in total), applying nine different analytical methods. In the three sampled water sources, typical contaminant patterns were found, i.e., pesticides and polycyclic aromatic hydrocarbons (PAH) in surface water with concentrations of 0.020–3.5 μg/L and 0.004–0.12 μg/L, disinfection by-products in tap water with concentrations of 0.050–79 μg/L, and pharmaceuticals in wastewater treatment plant effluents with concentrations of 0.020–0.76 μg/L, respectively. The most frequently detected organic compounds in surface water (45 positives out of 57 samples) were the pyridine pesticides clopyralid and picloram. The concentrations might indicate that they are used on a regular basis and in conjunction in the area of the TGR. Three- and four-ring PAH were ubiquitously distributed, while the poorly soluble five- and six-ring members, perfluorinated compounds, polychlorinated biphenyls, and polybrominated diphenyl ethers, were below the detection limit. In general, the detected concentrations in TGR are in the same range or even lower compared to surface waters in western industrialized countries, although contaminant loads can still be high due to a high discharge. With the exception of the two pesticides, clopyralid and picloram, concentrations of the investigated organic pollutants in TGR meet the limits of the Chinese Standards for Drinking Water Quality GB 5749 (Ministry of Health of China and Standardization Administration of China 2006) and the European Union (EU) Council Directive 98/83/EC on the quality of water intended for human consumption (The Council of the European Union 1998), or rather, the EU Directive on environmental quality standards in the field of water policy (The European Parliament and The Council of the European Union 2008). Therefore, the suggested use of surface water from TGR for drinking water purposes is a valid option. Current treatment methods, however, do not seem to be efficient since organic pollutants were detected in significant concentrations in purified tap water.     

Evaluation of the urban/rural particle-bound PAH and PCB levels in the northern Spain (Cantabria region)

The aim of the present study was to evaluate the polycyclic aromatic hydrocarbon (PAH) and polychlorinated biphenyl (PCB) levels in PM(10) and PM(2.5), at one rural and three urban sites in the Cantabria region (northern Spain). From all of these pollutants, benzo(a)pyrene is regulated by the EU air quality directives; its target value (1?ng/m(3)) was not exceeded. The concentration values of the studied organic pollutants at the studied sites are in the range of those obtained at other European sites. A comparison between the rural-urban stations was developed: (a) PAH concentration values were lower in the rural site (except for fluorene). Therefore, the contribution of local sources to the urban levels of PAHs seems relevant. Results from the coefficient of divergence show that the urban PAH levels are influenced by different local emission sources. (b) PCB rural concentration values were higher than those found at urban sites. Because no local sources of PCBs were identified in the rural site, the contribution of more distant emission sources (about 40?km) to the PCB levels is considered to be the most important; the long-range transport of PCBs does not seem to be significant. Additionally, local PAH tracers were identified by a triangular diagram: higher molecular weight PAHs in Reinosa, naphthalene in Santander and anthracene/pyrene in Castro Urdiales. A preliminary PAH source apportionment study in the urban sites was conducted by means of diagnostic ratios. The ratios are similar to those reported in areas affected by traffic emissions; they also suggest an industrial emission source at Reinosa.     

How to improve reliability in groundwater analysis: over a decade of experience with external quality control in field campaigns on volatile halogenated compounds

The reliability in measurement results obtained during environmental monitoring is crucial for the assessment and further planning of remediation efforts on the respective contaminated sites by the responsible authorities. A case study concerned with groundwater contaminated with perchloroethylene, trichloroethylene and 1,1,2-trichlorotrifluoroethane including their degradation products which involves private contract laboratories and an independent provider of quality assurance (QA) is presented. The experience gained with biannual monitoring campaigns over 14 years indicates that the selection of contractors on basis of accreditation status and successful performance in interlaboratory comparisons are not sufficient. Rather the auditing of the contractors by the QA provider prior to each campaign and the crosschecking of selected monitoring samples by the QA provider led to a lasting improvement of reliability in the contractors' measurement results. A mean deviation of 20% from the reference value determined by the QA provider for the crosschecked samples was reached.     

Coping with variability and change: Floods and droughts

Floods and droughts are natural phenomena for which the risks of occurrence are likely to continue to grow. Increasing levels of exposure and insufficient adaptive capacity are among the factors responsible for the rising vulnerability. The former is conditioned by anthropopressure (e.g., economic development of flood–prone areas) and adverse effects of climate change; scenarios for future climates indicate the possibility of amplified water–related extremes. This article presents the current situation of coping with extreme hydrological events within the pressure–state–response framework. Among promising response strategies, the role of forecast and warning, and of watershed management are reviewed. Sample success stories and lessons learnt related to hydrological extremes are given and policy implications discussed.     

Plants as transmission channels for insect vibrational songs

Summary The vibrational songs of several species of cydnid bugs and small cicadas (leafhoppers and planthoppers) living on various types of plants are recorded by means of laser vibrometry. The recorded vibrational songs are analysed with respect to amplitude, frequency spectrum and structure in the time domain (Figs. 2–5).The emission of vibrational songs from singing insects on plants is simulated. A small magnet is glued to the surface of the plant and moved by means of an electromagnet about one cm away (Fig. 1). The vibrations are recorded by means of laser vibrometry. The propagation velocity of the vibrations increases with the square root of frequency, i.e. in the way expected for bending waves.The mechanical properties of plants ranging from soft bean plants to stiff reeds and maples are measured. The results are used for calculating the theoretical propagation velocities of bending waves. The measured and the calculated values are rather close (Table 1). Although the mechanical properties of the plants studied vary widely, the propagation velocities at a certain frequency are of the same order of magnitude (Table 1).In all the plants studied, only little vibrational energy is lost by friction at frequencies below some kHz. Communication by means of bending waves is possible over distances of some meters. The bending waves are reflected with little loss of energy both from the root and from the top of the plant. The vibration signals may therefore travel up and down the plant several times before decaying completely (Fig. 7). The vibration at a certain spot on the plant depends not only on the distance to and nature of the emitter, but also on the modes of vibration of the plant. The amplitude of vibration does not decrease monotonically with distance from the emitter (Fig. 6).These filtering properties of the plants mean that it is essentially impossible to predict which frequencies in the signals will be amplified or attenuated in the plant at the location of the receiving animal. The vibrational signals recorded from the animals cover wide frequency bandwidths. The signals are therefore well adapted to the filtering properties of the plants, but the signals of the species studied here do not appear to be particularly adapted to specific properties of the host plants.The muscular power needed for communication by means of various types of vibrational signals is calculated. The result of this calculation supports the conclusion that the signals recorded here are carried by means of bending waves.The communication strategies open to small insects are considered. Vibrational signals appear to be an efficient means of communication, but only certain types of signals are suited, because the plants cause a considerable distortion of the signals. One kind of distortion, the dispersive property, may — in theory — be used by the listening animals to obtain information about the direction and distance to the singing animals.Dedicated to Dr. F. ossiannilsson, whose pioneering studies led to the suggestion that small insects may use plants as transmission channels for their songs     

Aerosols: unexpected disequilibrium phenomena between airborne radio activities of lead-210 and its progenies bismuth-210 and polonium-210

For the first time, concentrations of the long lived radon progenies ²¹⁰Pb, ²¹⁰Bi and ²¹⁰Po were measured in the mine atmosphere of the so called "healing gallery" in Badgastein, Austria, a region famous for its radioactive springs. These investigations were performed in order to study the radioactive equilibrium between the ²¹⁰Pb-²¹⁰Bi and the ²¹⁰Pb-²¹⁰Po pairs so as to gain more information about the aerosol-forming processes in the mine. The particle size distribution of the aerosols was determined under different ventilation conditions. Six-stage and eight-stage cascade impactors with working ranges from 0.15 to5 µm and from 0.063 to 8 µm, respectively, were used to collect the mine aerosols. These samples were analysed in the laboratory and measured by liquid scintillation spectrometry. The most surprising results were found under full ventilation, when the total activity concentrations of ²¹⁰Pb, ²¹⁰Bi and ²¹⁰Po were 4.6, 2.0 and 16.5 mBq/m³, respectively. In this case ²¹⁰Po/²¹⁰Pb activity ratios ranged between 1.8ǂ.3 and 4.3ǂ.3. These unexpected results were confirmed by the eight-stage impactor samples. For the smallest particles, between 0.062 and 0.125 µm, an even higher value of 7.5 was observed. As outside sources could be excluded, such ²¹⁰Po enrichments must occur during the aerosol-forming process itself inside the mine.     

Review of The Kyoto Protocol by M. Grubb,C. Vrolijk and D. Brack, 1999

Mitigation and Adaptation Strategies for Global Change -