Tylosin sorption to silty clay loam soils, swine manure, and sand

The objectives of this study were to assess sorption and desorption of tylosin, a macrolide antimicrobial chemical used in swine, cattle, and poultry production, in three silty clay loam soils of South Dakota and compare soil sorption to sand and manure sorption. The silty clay loam soils, from a toposequence in eastern South Dakota, standardized sand samples, and swine manure were used in 24-h batch sorption studies with tylosin concentrations ranging from 25 to 232 micro mole/L. Desorption from soil was conducted over a four-day period. Partition coefficients, based on the Freundlich isotherm (K(f)) or K(d) values, were calculated. K(f) values for the silty clay loams were similar, not influenced by landscape position, and averaged 1,350 with isotherm slopes ranging from 0.85 to 0.93. K(f) values for sand were dependent on solution/sand ratios and pH, ranging from 1.4 to 25.1. K(d) values of manure were dependent on the solution type and ranged from 840 L/kg with urine to about 175 L/kg when sorbed from water. Desorption of tylosin from each soil over the four-day period was < 0.2% of the amount added. The soils' high K(f) values and low desorption amounts suggest that once tylosin is in these soils, leaching to lower depths may not occur. However, this does not preclude runoff with soil eroded particles. If tylosin reaches a sand aquifer, through bypass flow or other mechanism(s), movement in the aquifer most likely would occur.     

Properties of pyrolytic chars and activated carbons derived from pilot-scale pyrolysis of used tires

Used tires were pyrolyzed in a pilot-scale quasi-inert rotary kiln. Influences of variables, such as time, temperature, and agent flow, on the activation of obtained char were subsequently investigated in a laboratory-scale fixed bed. Mesoporous pores are found to be dominant in the pore structures of raw char. Brunauer-Emmett-Teller (BET) surfaces of activated chars increased linearly with carbon burnoff. The carbon burnoff of tire char achieved by carbon dioxide (CO2) under otherwise identical conditions was on average 75% of that achieved by steam, but their BET surfaces are almost the same. The proper activation greatly improved the aqueous adsorption of raw char, especially for small molecular adsorbates, for example, phenol from 6 to 51 mg/g. With increasing burnoff, phenol adsorption exhibited a first-stage linear increase followed by a rapid drop after 30% burnoff. Similarly, iodine adsorption first increased linearly, but it held as the burnoff exceeded 40%, which implied that the reduction of iodine adsorption due to decreasing micropores was partially made up by increasing mesopores. Both raw chars and activated chars showed appreciable adsorption capacity of methylene-blue comparable with that of commercial carbons. Thus, tire-derived activated carbons can be used as an excellent mesoporous adsorbent for larger molecular species.     

Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 1. Stabilization performance of a continuous-flow reactor at low residence time.

There is increasing interest in the United States in producing biosolids from municipal wastewater treatment that meet the criteria for Class A designation established by the U.S. Environmental Protection Agency. Class A biosolids are intended to be free of pathogens and also must meet requirements for reduction of the vector-attraction potential associated with untreated sludge. High-temperature processes are considered to produce Class A biosolids if the combination of operating temperature and treatment time exceeds minimum criteria, but this option is not applicable to mixed, continuous-flow reactors. Such reactors, or any combination of reactors that does not meet the holding time requirement at a specific temperature, must be demonstrated to inactivate pathogens to levels consistent with the Class A criteria. This study was designed to evaluate pathogen inactivation by thermophilic anaerobic digestion in a mixed, continuous-flow reactor followed by batch or plug-flow treatment. In this first of a two-part series, we describe the performance of a continuous-flow laboratory reactor with respect to physical and chemical operating parameters; microbial inactivation in the combined continuous-flow and batch treatment system is described in the second part. Sludges from three different sources were treated at 53 degrees C, while sludge from one of the sources was also treated at 55 and 51 degrees C. Relatively short hydraulic retention times (four to six days) were used to represent a conservative operating condition with respect to pathogen inactivation. Treatment of a fermented primary sludge led to an average volatile-solids (VS) destruction efficiency of 45%, while VS destruction for the other two sources was near or below 38%, the Class A criterion for vector attraction reduction. Consistent with other studies on thermophilic anaerobic digestion of sludges at short residence times, effluent concentrations of volatile fatty acids (VFAs) were relatively high. Also consistent with other studies, the most abundant VFA in the effluent was propionate. Gas production ranged from 0.3 to 0.5 m3/kg VS fed and from 0.8 to 1.3 m3/kg VS destroyed.     

Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 2. Inactivation of pathogens and indicator organisms in a continuous-flow reactor followed by batch treatment.

Thermophilic-anaerobic digestion in a single-stage, mixed, continuous-flow reactor is not approved in the United States as a process capable of producing Class A biosolids for land application. This study was designed to evaluate the inactivation of pathogens and indicator organisms in such a reactor followed by batch treatment in a smaller reactor. The combined process was evaluated at 53 degrees C with sludges from three different sources and at 51 and 55 degrees C with sludge from one of the sources. Feed sludge to the continuous-flow reactor was spiked with the pathogen surrogates Ascaris suum and vaccine-strain poliovirus. Feed and effluent were analyzed for these organisms and for indigenous Salmonella spp., fecal coliforms, Clostridium perfringens spores, and somatic and male-specific coliphages. No viable Ascaris eggs were observed in the effluent from the continuous reactor at 53 or 55 degrees C, with greater than 2-log removals across the digester in all cases. Approximately 2-log removal was observed at 51 degrees C, but all samples of effluent biosolids contained at least one viable Ascaris egg at 51 degrees C. No viable poliovirus was found in the digester effluent at any of the operating conditions, and viable Salmonella spp. were measured in the digester effluent in only one sample throughout the study. The ability of the continuous reactor to remove fecal coliforms to below the Class A monitoring limit depended on the concentration in the feed sludge. There was no significant removal of Clostridium perfringens across the continuous reactor under any condition, and there also was limited removal of somatic coliphages. The removal of male-specific coliphages across the continuous reactor appeared to be related to temperature. Overall, at least one of the Class A pathogen criteria or the fecal coliform limit was exceeded in at least one sample in the continuous-reactor effluent at each temperature. Over the range of temperatures evaluated, the maximum time required to meet the Class A criteria by batch treatment of the continuous-reactor effluent was 1 hour for Ascaris suum and Salmonella spp. and 2 hours for fecal coliforms.     

Estimating catchment nutrient flow with the HBV-NP model: sensitivity to input data

The dynamic catchment model HBV-N has been further developed by adding routines for phosphorus transport and is now called the HBV-NP model. The model was shown to satisfactorily simulate nutrient dynamics in the R?nne? catchment (1,900 km2). Its sensitivity to input data was tested, and results demonstrated the increased sensitivity to the selection of input data on a subcatchment scale when compared with the catchment scale. Selection of soil and land use databases was found to be critical in some subcatchments but did not have a significant impact on a catchment scale. Although acceptable on a catchment scale, using templates and generalization, with regards to emissions from point sources and rural households, significantly decreased model performance in certain subcatchments when compared with using more detailed local information. A division into 64 subcatchments resulted in similar model performance at the catchment outlet when compared with a lumped approach. Adjusting the imported matrixes of the regional leaching of nitrogen, from agricultural land, against mean subcatchment water percolation did not have a significant impact on the model performance.     

Applicability of Fenton and H2O2/UV reactions in the treatment of tannery wastewaters

In this paper we evaluated the H2O2/UV and the Fenton's oxidation processes for the treatment of tannery wastewater under different experimental conditions. Efficiencies were judged by the amounts of organic substances degraded or eliminated under these treatment techniques. Daphnia magna and Vibrio fischeri were used to monitor toxicity. Organic compounds contained in the untreated and treated tannery wastewater were determined and identified using substance specific techniques. Gas chromatography-mass spectrometry (GC-MS) in positive electron impact (EI(+)) mode was applied to determine volatile organics. Atmospheric pressure ionization (API) mass (MS) and tandem mass spectrometry (MS-MS) coupled with flow injection analysis (FIA) or liquid chromatography (LC) were used to detect or identify polar organic pollutants. The experimental results indicated that both oxidation processes--H2O2/UV at pH 3 and Fenton at pH 3.5--are able to reduce TOC content by mineralisation of the organic compounds.     

Anaerobic degradation of diethyl phthalate, di-n-butyl phthalate, and di-(2-ethylhexyl) phthalate from river sediment in Taiwan

We investigated anaerobic degradation rates for three phthalate esters (PAEs), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), and di-(2-ethylhexyl) phthalate (DEHP), from river sediment in Taiwan. The respective anaerobic degradation rate constants for DEP, DBP, and DEHP were observed as 0.045, 0.074, and 0.027 1/day, with respective half-lives of 15.4, 9.4, and 25.7 days under optimal conditions of 30 °C and pH 7.0. Anaerobic degradation rates were enhanced by the addition of the surfactants brij 35 and triton N101 at a concentration of 1 critical micelle concentration (CMC), and by the addition of yeast extract. Degradation rates were inhibited by the addition of acetate, pyruvate, lactate, FeCl₃, MnO₂, NaCl, heavy metals, and nonylphenol. Our results indicate that methanogen, sulfate-reducing bacteria, and eubacteria are involved in the degradation of PAEs.     

Contaminated sediments and bioassay responses of three macroinvertebrates, the midge larva Chironomus riparius, the water louse Asellus aquaticus and the mayfly nymph Ephoron virgo

Bioassays are widely used to estimate ecological risks of contaminated sediments. We compared the results of three whole sediment bioassays, using the midge larva Chironomus riparius, the water louse Asellus aquaticus, and the mayfly nymph Ephoron virgo. We used sediments from sixteen locations in the Dutch Rhine-Meuse Delta that differed in level of contamination. Previously developed protocols for each bioassay were followed, which differed in sediment pretreatment, replication, and food availability. The Chironomus bioassay was conducted in situ, whereas the other two were conducted in the laboratory. The measured endpoints, survival and growth, were related to contaminant levels in the sediment and to food quantity in water and sediment.

Only the response of A. aquaticus in the bioassay was correlated with sediment contamination. Food availability in overlying water was much more important for C. riparius and E. virgo, thereby masking potential sediment contaminant effects. We conclude that growth of A. aquaticus was depressed by sediment contamination, whereas growth of E. virgo and C. riparius was stimulated by seston food quantity. We discuss that the trophic state of the ecosystem largely affects the ecological risks of contaminated sediments.     

Seasonal Fluctuation in Heavy Metal Pollution in Iran´s Siahroud River - A Preliminary Study (7 pp)

Background The management of its available water resources has become a key issue for Iran. During the last few decades, the water quality of Siahroud River in the coastal plain of the Caspian Sea in Gilan Province in Northern Iran has significantly degraded. The scarcity of water has been compounded by rapid population growth and increasing pollution from fertilizers, pesticides, and municipal and industrial wastes. One of the sources of this degradation is the movement of heavy metals from the river's watershed into the various water systems supported by the river, including the water system for Rasht City. Methods To study the magnitude of heavy metal pollution in the Siahroud River, seven heavy metals including Zn, Cu, Pb, Cd, Mn, Fe, and Ni were measured in duplicate from replicated water samples collected over five consecutive seasons and analyzed by Atomic Absorption Spectrometry. In situ measurements of pH were taken with the samples and total organic carbon (TOC) was analyzed by IR gas measurement. Results The results demonstrated that four of the seven heavy metals including Pb, Fe, Cd, and Mn exceeded permissible safe levels as established by the United States Environmental Protection Agency. Multivariate factor analysis suggested that industrial land-use was the main contributing factor for the high levels of Fe and Mn in the Siahroud River, whereas, Cd was principly from agricultural activities in the watershed. The data also suggested that pH and TOC had an important role in the behaviour of Pb and Mn, and that the elevated levels of these two heavy metals in Siahroud River was the consequence of other anthropogenic sources. Only negligible levels of Zn, Cu and Ni were detected. Finally, all the sampling stations were subjected to cluster analysis. The results indicated that three different zones could be distinguished according to the levels of pollution. In addition, it was shown that the urban areas did not have a significant impact on the heavy metal pollution in the river. This observation stems from the fact that the data from the sampling stations before and after Rasht City were not significantly different. Recommendation . Preventive measures need to be undertaken in the land-use systems and watersheds of the Siahroud River to reduce the pollution levels of Pb, Cd, Mn and Fe.     

Enhanced experimental flexibility and control in ecotoxicological mesocosm experiments--a new outdoor and indoor pond and stream system

Scope The German Federal Environmental Agency has put into operation a new modular mesocosm system consisting of eight outdoor and eight indoor ponds and streams in order to investigate fate and effects of chemicals and municipal wastewater in aquatic ecosystems. General design and special characteristics are given to demonstrate the wide range of possibilities for experimental research. - General design. Each of the 16 streams with riffle and pool sections can be varied in length up to 106 m. The streams can be run as circular or flow-through systems at a flow velocity of 0.02 to 0.6 m/s. Physico-chemical standard parameters are measured on-line. The 16 ponds, which can be connected to the stream systems, are equipped with drainage and pore water-sampling devices for simulating processes in the littoral zone including influent and effluent ground water flow. Perspectives Since the highly flexible and controllable construction also allows treating a wide range of hydrological and ecological experiments external institutions are invited to submit proposals.