Competitive diesel engine emissions of sulphur and nitrogen species

NO_x, nitrate and sulphate emissions from a typical European passenger car diesel engine have been measured testing eight different fuels under five steady operating conditions (reproducing modes of the European transient urban/extraurban certification cycle). It is confirmed that nitrogen species compete with sulphur compounds to be adsorbed by diesel particulate matter (DPM) before being emitted into the atmosphere. This competition is found to increase with engine load, and is explained on the basis of the different specific surface and adsorption capacity of soot particles under different operating modes. When a high specific surface is available, as occurs in low load modes, both nitrates and sulphates are adsorbed by soot particles. On the contrary when a small surface is accessible, like in high load modes, sulphates are selectively adsorbed. This is specially important since sulphates are responsible for hydrocarbon retention in DPM due to the scrubbing effect.     

Unintentional injuries among infants age 0-12 months

Each year an estimated 328,500 infants age 0-12 months are treated for unintentional injuries in emergency departments (EDs): one infant every minute and a half. The leading cause, overall and by month of age, was fall-related injury. The second leading cause was 'struck by or against.' The majority of patients were injured at home. Younger infants were more likely to be hospitalized than older ones and more males than females were injured. Gender differences suggest that parenting practices may play a role, but ecological approaches should be considered in an effort to understand the connection between injuries and an infant's developmental stage.     

Occurrence,transformation, bioaccumulation,risk and analysis of pharmaceutical and personal care products from wastewater: a review

Almost all aspects of society from food security to disease control and prevention have benefited from pharmaceutical and personal care products, yet these products are a major source of contamination that ends up in wastewater and ecosystems. This issue has been sharply accentuated during the coronavirus disease pandemic 2019 (COVID-19) due to the higher use of disinfectants and other products. Here we review pharmaceutical and personal care products with focus on their occurrence in the environment, detection, risk, and removal.

     

Endosulfan acute toxicity and histomorphological alterations in Jenynsia multidentata (Anablepidae, Cyprinodontiformes)

Toxicity tests using adult specimens of Jenynsia multidentata were carried out during 96 hours in order to determine the lethal concentration (LC50) of endosulfan. Histological alterations were determined in gills and liver. Gill damage was quantified as secondary lamellae thickness. The 96 hr LC50 values were significantly different between males (0.719 microg x L(-1)) and females (1.317 microg x L(-1)). The sex difference was attributed to the dimorphism in the lipid content in females (2.16%) and males (1.79%). Histological alterations in gills included hypertrophy and lifting of the epithelium of the secondary lamellae and aneurisms. These alterations caused a significant increase of the secondary lamellae thickness in treatment versus control fish. Finally, reversible histological alterations (such as hydropic degeneration and dilation of sinusoids) were observed in the liver of exposed fish as well as an irreversible change such as necrosis at the highest concentrations.     

Uptake, tissue distribution and metabolism of the insecticide endosulfan in Jenynsia multidentata (Anablepidae, Cyprinodontiformes)

The study reports the accumulation, distribution and metabolism of technical endosulfan in Jenynsia multidentata. Adult females were exposed to acute sublethal concentrations (0.072, 0.288 and 1.4 μg L⁻¹). After 24 h, fish were sacrificed and gills, liver, brain, intestine and muscle were removed. Results show that both isomers of technical-grade endosulfan (α- and β-) are accumulated in fish tissues and biotransformation to endosulfan sulfate occurs at all concentrations tested. Significantly differences in endosulfan accumulation were only found at 1.4 μg L⁻¹ but not between the lowest concentrations. However a similar distribution pattern was observed at all exposure levels where liver, intestine and brain had the highest levels of α-, β-endosulfan and endosulfan sulfate. Moreover, liver and brain showed the highest endosulfan sulfate:α-endosulfan ratios due to high biotransfomation capacity. J. multidentata demonstrated to be a sensitive species under exposure to technical endosulfan and, therefore, could be used to assess aquatic pollution.     

Determination of PAHs in diesel particulate matter using thermal extraction and solid phase micro-extraction

Determination of polycyclic aromatic hydrocarbons (PAHs) from chemical analysis of the diesel particulate matter (DPM) requires considerable sampling expertise and is often time-consuming because sample preparation demands strict extraction procedures due to the complex nature of the DPM matrix. In this study, a method to measure the emissions of the 16-U.S. Environmental Protection Agency (EPA) priority PAHs adsorbed in diesel particles has been developed. This method involves the capture of the DPM in glass microfibre filters, thermal extraction of the compounds from the particulate matrix in a thermogravimetric analyzer (TGA), determination of the concentration by means of a solid phase micro-extraction (SPME) fibre and subsequent analysis using a gas chromatograph coupled to a mass spectrometer (GC/MS). Analyses of a fully characterised DPM prepared by the National Institute of Standards and Technology, NIST (SRM 1650b), were performed and calculated errors showed that the method is capable of giving reliable quantitative data. Additionally, DPM collected from a diesel engine was analyzed and the results showed the high method sensitivity to the engine operating conditions.     

Habitat Fragmentation in Arid Zones: A Case Study of <Emphasis Type="Italic">Linaria nigricans</Emphasis> Under Land Use Changes (SE Spain)

Habitat fragmentation due to human activities is one of the most important causes of biodiversity loss. In Mediterranean areas the species have co-evolved with traditional farming, which has recently been replaced for more severe and aggressive practices. We use a methodological approach that enables the evaluation of the impact that agriculture and land use changes have for the conservation of sensitive species. As model species, we selected Linaria nigricans, a critically endangered plant from arid and semiarid ecosystems in south-eastern Spain. A chronosequence of the evolution of the suitable habitat for the species over more than 50 years has been reconstructed and several geometrical fragmentation indices have been calculated. A new index called fragmentation cadence (FC) is proposed to quantify the historical evolution of habitat fragmentation regardless of the habitat size. The application of this index has provided objective forecasting of the changes of each remnant population of L. nigricans. The results indicate that greenhouses and construction activities (mainly for tourist purposes) exert a strong impact on the populations of this endangered species. The habitat depletion showed peaks that constitute the destruction of 85% of the initial area in only 20 years for some populations of L. nigricans. According to the forecast established by the model, a rapid extinction could take place and some populations may disappear as early as the year 2030. Fragmentation-cadence analysis can help identify population units of primary concern for its conservation, by means of the adoption of improved management and regulatory measures.     

Use of FGD gypsum in fire resistant panels

Gypsum from power plant flue gas desulphurization units (FGD gypsum) is a combustion by-product produced in high quantities. In this paper, gypsum panels composed of 100% FGD gypsum from two power plants have been subjected to different physico-chemical (density, pH, humidity), mechanical (flexural and compressive strength, surface hardness, impact resistance), fire resistance and environmental tests (leaching and radioactivity). The results obtained have been compared with the requirements established in some European standards for commercial gypsum and other standards for similar products. In addition, the panels manufactured have been compared with commercial gypsum panels in order to determine the recycling possibilities of this kind of material in this application.     

Influence of seasonal climate differences on the pharmaceutical,hormone and personal care product removal efficiency of a drinking water treatment plant

The potential presence of pharmaceuticals, hormones and personal care products in drinking water supplies has raised concerned over the efficiency with which these substances are removed by water treatment processes. In this work, we analyzed samples of raw, unprocessed water collected in different periods and found them to contain higher levels of these contaminants in the colder periods (viz. 12–314 ng L⁻¹ in autumn and winter as compared to 8–127 ng L⁻¹ in spring and summer) as a result of their biodegradation being favoured by high temperatures and solar irradiance. We also assessed the efficiency with which these contaminants are removed from drinking water by a water treatment plant operating in south-eastern Spain. Preoxidation with potassium permanganate and chloramination with sodium hypochlorite in the presence of highly concentrated ammonia were found to be the treatment steps most markedly contributing to the removal of pharmaceuticals, hormones and personal care products from drinking water (especially in the warmer periods, where these contaminants were completely removed from the water). By contrast, water treated in the colder periods (autumn and winter) still contained small amounts of ibuprofen and carbamazepine (0.09–0.5 ng L⁻¹) which, however, accounted for less than 0.2% of their original concentrations in the water prior to treatment.     

Spatio-temporal variations of biomass and abundance in bathyal non-crustacean megafauna in the Catalan Sea (North-western Mediterranean)

The spatio-temporal variations in diversity, biomass and abundance of bathyal invertebrates (excluding decapod crustaceans, which have been analysed elsewhere) from the North-western Mediterranean margin are described. The upper canyon (∼450 m), middle slope (∼650 m) and lower slope (∼1,200 m) habitats were investigated throughout the year. The first two sites are visited daily by a specialised commercial fisheries’ fleet, while the deeper site has not been impacted by fishing activities. A total of 140 species from 12 phyla were collected from the 3 study areas. Of these, the Mollusca, Echinodermata, Polychaeta and Cnidaria were the most speciose groups. The patterns of species diversity (H′) and evenness (E) were similar in time and space. The upper canyon and middle-slope sites were dominated by echinoderms and molluscs, while the lower-slope site was dominated by cnidarians and sponges. Multifactorial ANOVA showed significant spatio-temporal differences in the biomass and/or abundance only in echinoderms, molluscs, cnidarians and polychaetes. The faunal differences observed were explained by habitat type, but not by season. The role of submarine canyons and commercial fishing on shaping the diversity and biomass of bathyal Mediterranean invertebrates is discussed. Luis Dantart: Deceased March 2005