Dilution-based emissions sampling from stationary sources: Part 2--Gas-fired combustors compared with other fuel-fired systems

With the recent focus on fine particle matter (PM2.5), new, self-consistent data are needed to characterize emissions from combustion sources. Such data are necessary for health assessment and air quality modeling. To address this need, emissions data for gas-fired combustors are presented here, using dilution sampling as the reference. The dilution method allows for collection of emitted particles under conditions simulating cooling and dilution during entry from the stack into the air. The sampling and analysis of the collected particles in the presence of precursor gases, SO2 nitrogen oxide, volatile organic compound, and NH3 is discussed; the results include data from eight gas fired units, including a dual-fuel institutional boiler and a diesel engine powered electricity generator. These data are compared with results in the literature for heavy-duty diesel vehicles and stationary sources using coal or wood as fuels. The results show that the gas-fired combustors have very low PM2.5 mass emission rates in the range of approximately 10(-4) lb/million Btu (MMBTU) compared with the diesel backup generator with particle filter, with approximately 5 x 10(-3) lb/MMBTU. Even higher mass emission rates are found in coal-fired systems, with rates of approximately 0.07 lb/MMBTU for a bag-filter-controlled pilot unit burning eastern bituminous coal. The characterization of PM2.5 chemical composition from the gas-fired units indicates that much of the measured primary particle mass in PM2.5 samples is organic or elemental carbon and, to a much less extent, sulfate. Metal emissions are quite low compared with the diesel engines and the coal- or wood-fueled combustors. The metals found in the gas-fired combustor particles are low in concentration, similar in concentration to ambient particles. The interpretation of the particulate carbon emissions is complicated by the fact that an approximately equal amount of particulate carbon (mainly organic carbon) is found on the particle collector and a backup filter. It is likely that measurement artifacts, mostly adsorption of volatile organic compounds on quartz filters, are positively biasing "true" particulate carbon emission results.     

Quantification of biotransformation of chlorinated hydrocarbons in a biostimulation study: added value via stable carbon isotope analysis

Stable carbon isotope analysis of chlorinated aliphatic compounds was performed at an in situ biostimulation pilot test area (PTA) at a site where 1,2-dichloroethane (1,2-DCA) and trichloroethene (TCE) were present in groundwater. Chlorinated products of TCE reductive dechlorination (cis-dichloroethene (cDCE) and vinyl chloride (VC)) were present at concentrations of 17.5 to 126.4 micromol/L. Ethene, a potential degradation product of both 1,2-DCA dihaloelimination and TCE reductive dechlorination was also present in the PTA. Emulsified soybean oil and lactate were added as electron donors to stimulate anaerobic dechlorination in the PTA. Stable carbon isotope analysis provided evidence that dechlorination was occurring in the PTA during biostimulation, and a means of monitoring changes in dechlorination efficiency over the 183 day monitoring period. Stable carbon isotope analysis was also used to determine if ethene production in the PTA was due to dechlorination of TCE, 1,2-DCA, or both. Fractionation factors (alpha) were determined in the laboratory during anaerobic biotransformation of 1,2-DCA via a dihaloelimination reaction in four separate enrichment cultures. These alpha values (as well as the previously published ranges of alpha for the dechlorination of TCE, cDCE and 1,2-DCA) were used, along with isotopic values measured during the pilot test, to derive quantitative estimates of biotransformation during the pilot test. Dechlorination was found to account for 10.7 to 35.9%, 21.9 to 74.9%, and 54.4 to 67.8% of 1,2-DCA, TCE and cDCE concentration loss respectively in the PTA. Stable carbon isotope analysis indicates that dechlorination of 1,2-DCA, TCE and cDCE were all significant processes during the pilot test, while ethene production during the pilot test was dominated by 1,2-DCA dihaloelimination. This study demonstrates how stable carbon isotope analysis can provide more conservative estimates of the extent of biotransformation than do conventional protocols. In addition, in a complex mixed plume such as this, compound specific isotope analysis is shown to be one of the few methods available for clarifying dominant biotransformation pathways where breakdown products are non-exclusive (i.e. ethene).     

Likelihood Ratio Analysis of Skin Cancer Prevalence Associated with Arsenic in Drinking Water in the USA

Several published studies have examined skin-cancer prevalence in regions of the USA that have concentrations of arsenic above the USA drinking-water standard. Those studies with adequate exposure and health outcome data did not report any skin cancer cases. Because the USA's arsenic concentrations are relatively low compared to some other countries and the study populations are small, the absence of reported skin-cancer cases could be due to an absence of risk in USA populations or random variability from a predicted risk. We used the current EPA arsenic cancer slope factor (CSF) model, which is derived from Taiwanese populations exposed to high levels of arsenic, to predict the expected number of skin cancers. We then conducted a likelihood ratio analysis, which showed that a null hypothesis (no additional skin cancer risk from arsenic) was approximately 2.2 times more likely than the hypothesis that ingested arsenic causes the predicted rate of skin cancers. Although based on small numbers, our analysis of USA populations indicates that the CSF derived from arsenic exposure in Taiwanese populations may be an overestimate when applied to USA populations.     

PARAMETER UNCERTAINTY IN RAINFALL-RUNOFF MODELING FOR POLDER SYSTEM DESIGN1

ABSTRACT: An approach is developed for incorporating the uncertainty of parameters for estimating runoff in the design of polder systems in ungaged watersheds. Monte Carlo Simulation is used to derive a set of realizations of streamflow hydrographs for a given design rainstorm using the U. S. Soil Conservation Service (SCS) unit hydrograph model. The inverse of the SCS curve number, which is a function of the antecedent runoff condition in the SCS model, is the random input in the Monte Carlo Simulation. Monte Carlo realizations of streamfiow hydrographs are used to simulate the performance of a polder flood protection system. From this simulation the probability of occurrence of flood levels for a particular hydraulic design may be used to evaluate its effectiveness. This approach is demonstrated for the Pluit Polder flood protection system for the City of Jakarta, Indonesia. While the results of the application indicate that uncertainty in the antecedent runoff condition is important, the effects of uncertainty in rainfall data, in additional runoff parameters, such as time to peak, in the hydraulic design, and in the rainfall-runoff model selected should also be considered. Although, the SCS model is limited to agricultural conditions, the approach presented herein may be applied to other flood control systems if appropriate storm runoff models are selected.     

Does trait affect promote job attitude stability?

Trait affect has been studied as a factor which may help explain why job attitudes tend to be rather enduring over time. In this study, test-retest correlations of various job attitudes measured 7 years apart were relatively unaffected by controlling for five measures of affective disposition.     

Evaluating the potential of biodiversity offsets to achieve net gain

Evaluating the outcomes and tracking the trajectory of biodiversity offsets is essential to demonstrating their effectiveness as a mechanism to conciliate development and conservation. We reviewed the literature to determine the principles that should underpin biodiversity offset planning and the criteria for offset evaluation at the project level. According to the literature, the core principles of equivalence, additionality, and permanence are used as criteria to evaluate conservation outcomes of offsets. We applied the criteria to evaluate offsets of a large iron ore mining project in the Atlantic Forest in Brazil. We examined equivalence in terms of the amount of area per biodiversity value affected and fauna and flora similarity, additionality in terms of landscape connectivity, and permanence in terms of guarantees to ensure protection and restoration offsets lasting outcomes. We found an offset ratio (amount of affected area:offset area) of 1:1.8 for forests and 1:2 for grasslands. Ecological equivalence (i.e., similarity between affected and offset areas) was found for forested areas, but not for ferruginous rupestrian grasslands or for fauna. Landscape metrics showed that connectivity improved relative to the preproject situation as a result of locating restoration offsets in the largest and best-connected forest patch. Permanence of offsets was addressed by establishing covenants and management measures, but financial guarantees to cover maintenance costs after mine closure were lacking. Offsets should be equivalent in type and size, provide conservation outcomes that would not be obtained without them (additionality), and be lasting (permanence). To monitor and evaluate offsets, it is necessary to determine how well these 3 principles are applied in the planning, implementation, and maintenance of offsets. Achieving measurable conservation outcomes from offsets is a long-term endeavor that requires sustained management support, and is information intensive. Thus, offsets require ongoing monitoring and evaluation as well as adaptive management.     

Spatial distribution of calcium in food, water and soil and its possible influence on rickets disease in Northern Nigeria

Since the 1990s, children of the Gbagyi tribe in Northern Nigeria have been suffering severe rickets with an incidence of up to 40% in the children's generation. The disease seems to be prevalent in an area of approximately 100 km(2) south-east of Kaduna. According to broad medical studies in that area, there is no evidence for a genetic disposition but for a nutritional cause of the disease. A lack of calcium was found in blood and was calculated to originate from diet. We therefore checked parent material, soil, maize cobs (Zea mays) and drinking water for their specific Ca contents from a region with rickets problem (study area A) and compared the results to Ca amounts in similar samples from a region where rickets is unknown among the Gbagyi population (study area B). It thereby became apparent that there are no differences in mineralogical composition of the parent material between the study areas, but that Ca contents in soil, maize cobs and drinking water are 47.6%, 26.6%, respectively, 79.1% lower in study area A compared to study area B. This result suggests that there may indeed be a nutritionally and/or environmentally influence on rickets disease. Nevertheless, further research on this topic is required.     

Cadmium and lead toxicity and bioaccumulation in Microcystis aeruginosa

The growth of human population leads to intensification of agriculture and promotes, through eutrophication, development of cyanobacteria. One of the most widespread and bloom-forming species in freshwater is toxic Microcystis aeruginosa （M. aeruginosa）. Combustion of fossil fuels and metallurgical processes are the main sources of heavy metals contamination in surface water including cadmium （Cd） and lead （Pb）. The following study was conducted in order to determine the effect of 1- 20 mg. L-1 of Cd and Pb on photochemistry （using flow cytometry） and growth （based on chlorophyll concentra- tion） ofM. aeruginosa as well as to estimate levels of metal bioaccumulation. We have found that 1-10mg.L-1 of Cd and 1-5 rag. L1 of Pb induced continuous enhancement of chlorophyll fluorescence during 24 h of incubation. No significant degradation of chlorophyll was observed in these samples. At higher concentrations of 20 mg. L-1 of Cd and 10-20 mg.L-1 of Pb chlorophyll level significantly decreased and its fluorescence was quenched. M. aeruginosa demonstrated high capability of Cd and Pb bioaccumulation, proportionally to initial metal concentration. In samples with initial concentration of 20 mg. L-1 of Cd and Pb bioaccumulation of 87.3% and 90.1% was observed, respectively. Our study demonstrates that M. aeruginosa can potentially survive in highly metals polluted environments, be a primary source of toxic metals in the food chain and consequently contribute to enhanced toxicity of heavy metals to living organisms including human.     

Frequent colony fusions provide opportunities for helpers to become reproductives in the termite Zootermopsis nevadensis

In many termite taxa, colonies occupying the same nesting resource can meet, interact, and merge with unrelated conspecific neighbors. Because proto-termite ancestors likely also co-inhabited resources and experienced interactions with neighboring conspecific families, extant species that form fused colony units may offer fundamental clues to explaining the origins of eusociality in Isoptera, particularly if both original families retain the potential for reproduction. We allowed entire colonies of Zootermopsis nevadensis (Archotermopsidae) to interact, merge, and develop in the lab, then used genetic markers to determine the family of origin of reproductives, soldiers, and helpers. Persisting and new members of all castes arose from both original colonies and in some cases were hybrids of the two original lineages. We also measured the frequency of mixed-family colonies in natural settings. Ten out of 30 field sampled colonies contained mixed families, demonstrating that interactions and fusions are common in nature. We discuss the implications of our findings as a model system for understanding the evolution of eusociality in termites, highlighting the importance of ecological circumstances impacting direct, indirect, and colony-level fitness.