Dilution-based emissions sampling from stationary sources: Part 2--Gas-fired combustors compared with other fuel-fired systems

With the recent focus on fine particle matter (PM2.5), new, self-consistent data are needed to characterize emissions from combustion sources. Such data are necessary for health assessment and air quality modeling. To address this need, emissions data for gas-fired combustors are presented here, using dilution sampling as the reference. The dilution method allows for collection of emitted particles under conditions simulating cooling and dilution during entry from the stack into the air. The sampling and analysis of the collected particles in the presence of precursor gases, SO2 nitrogen oxide, volatile organic compound, and NH3 is discussed; the results include data from eight gas fired units, including a dual-fuel institutional boiler and a diesel engine powered electricity generator. These data are compared with results in the literature for heavy-duty diesel vehicles and stationary sources using coal or wood as fuels. The results show that the gas-fired combustors have very low PM2.5 mass emission rates in the range of approximately 10(-4) lb/million Btu (MMBTU) compared with the diesel backup generator with particle filter, with approximately 5 x 10(-3) lb/MMBTU. Even higher mass emission rates are found in coal-fired systems, with rates of approximately 0.07 lb/MMBTU for a bag-filter-controlled pilot unit burning eastern bituminous coal. The characterization of PM2.5 chemical composition from the gas-fired units indicates that much of the measured primary particle mass in PM2.5 samples is organic or elemental carbon and, to a much less extent, sulfate. Metal emissions are quite low compared with the diesel engines and the coal- or wood-fueled combustors. The metals found in the gas-fired combustor particles are low in concentration, similar in concentration to ambient particles. The interpretation of the particulate carbon emissions is complicated by the fact that an approximately equal amount of particulate carbon (mainly organic carbon) is found on the particle collector and a backup filter. It is likely that measurement artifacts, mostly adsorption of volatile organic compounds on quartz filters, are positively biasing "true" particulate carbon emission results.     

Responses of the flea beetles Phyllotreta nemorum and P. cruciferae to metabolically engineered Arabidopsis thaliana with an altered glucosinolate profile

Summary. Insects feeding on Cruciferae recognize their host plants at least partially by means of specific responses to glucosinolates. However, the effects of variations in glucosinolate levels on the acceptability of plants for specialized insects are not well understood. A survey of the literature demonstrated positive, no, as well as negative correlations between plant acceptability and glucosinolate levels. The present study took advantage of the presence of transgenic Arabidopsis thaliana plants with increased glucosinolate levels. Transgenic A. thaliana contain the CYP79A1 gene from Sorghum bicolor. This gene encodes an enzyme which converts L-tyrosine into p-hydroxyphenylacetaldoxime in the biosynthesis of cyanogenic glycosides in S. bicolor. In transgenic A. thaliana plants, endogenous enzymes convert p-hydroxyphenylacetaldoxime into p-hydroxybenzylglucosinolate (sinalbin), which is not found naturally in this plant. The introduction of CYP79A1 resulted in a four-fold increase in total glucosinolate levels in transgenic A. thaliana plants. Although these changes in glucosinolate levels were rather dramatic, they did not have any effects on the acceptability of A. thaliana for the two flea beetle species, Phyllotreta nemorum and P. cruciferae. The flea beetles did not discriminate between transgenic and wildtype plants. Furthermore, they did not discriminate between leaf discs of wildtype plants where different concentrations of p-hydroxybenzylglucosinolate had been applied topically on the leaf surface. Feeding in P. nemorum was stimulated by extremely high levels of allylglucosinolate while this compound had no effect on P. cruciferae. It is concluded that the effect of glucosinolates on adapted insects depends on the chemical or physical environment in which the glucosinolates are found.     

Bleiverunreinigung von trinkwasser durch leitungssysteme in Berlin

There are many acute and chronic adverse effects of lead on human beings. This is especially true for infants and children. In Germany, the intake of lead through drinking water is commonly due to metal corrosion of the user’s plumbing. In the last years and decades, many lead pipes in Germany were replaced by pipes made of alternative materials. The aim of this study was to assess the present state of drinking water contamination and the resulting lead exposure in infants, the most sensitive population group. For this purpose, mothers of newborn babies were offered a free examination of their drinking water. After a written declaration of consent had been received, two composite samples collected during the day were obtained from the families. The samples were analyzed for their lead concentration using atomic absorption spectrometry. A total of 2109 samples from house holds in the area of Berlin, Germany were collected. From the first composite samples 5.6% and 7.0% of the second composite samples demonstrated lead concentrations higher than 0.01 mg/l (recommended limit of the WHO). 0.95% of the first composite samples and 1.3% of the second composite samples had concentrations above the limit of the German drinking water regulation (0.04 mg/l). The highest measured lead concentrations is the first and second composite samples were 0.19 and 0.13 mg/l, respectively. By region, the suburbs of Charlottenburg, Neukölln, Schöneberg, Wilmersdorf and Zehlendorf were particularly severley affected with more than 10% and their samples being elevated above 0.01 mg/l.     

Retrospective monitoring of persistent organic pollutants,including PCBs,PBDEs, and polycyclic musks in blue mussels (Mytilus edulis) and sediments from New Bedford Harbor,Massachusetts, USA: 1991–2005

Blue mussels (Mytilus edulis) and sediments collected from 1991 to 2005 from New Bedford Harbor (NBH), MA, were analyzed for two polycyclic musks (HHCB or Galaxolide® and AHTN or Tonalide®), polybrominated diphenyl ethers (PBDEs), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and organochlorine pesticides (OCPs). HHCB and AHTN were found in mussel tissues at mean concentrations of 836 and 376 ng/g lipid weight (lw), respectively, which were two- to seven-fold higher than those found at a reference site. Mean concentrations of HHCB and AHTN in NBH sediments were 12 and 6.3 ng/g dry weight (dw), respectively. Four- and five-ringed PAHs, such as phenanthrene, anthracene, fluoranthene, and pyrene, collectively accounted for 61 % of the ∑PAHs concentrations in mussels from NBH. Mean ΣPCB concentrations in mussels from upper and lower NBH were 942 and 182 μg/g lw, respectively, and were dominated by tetra- and penta-chlorobiphenyl congeners, collectively accounting for 61 % of the ΣPCB concentrations. The mean concentration of ∑PBDEs in mussels from NBH was 277 ng/g lw, and no significant difference existed in the concentrations between upper and lower NBH. DDTs were the major OCP found in mussels, found at a mean concentration of 778 ng/g lw. The concentrations of HHCB, AHTN, ΣPBDEs, ΣPAHs, and DDTs in mussels decreased significantly (r ²?≥?0.56, p?≤?0.052) from 1991 to 2005. The concentrations of PCBs and chlordanes did not exhibit a decreasing trend in mussel tissues (r ²?<?0.50; p?>?0.076) from 1991 to 2005. Based on the temporal trends in the concentrations of HHCB, AHTN, ∑PAHs, and ∑PBDEs found in mussels from NBH, it was estimated that between 5.5 and 12 years were required for the concentrations of these compounds to decrease by half (i.e., environmental halving time) of the levels found in 1991.     

Glacier response to current climate change and future scenarios in the northwestern Italian Alps

We analyze longtime series of annual snout positions of several valley glaciers in the northwestern Italian Alps, together with a high-resolution gridded dataset of temperature and precipitation available for the last 50 years. Glacier snout fluctuations are on average negative during this time span, albeit with a period of glacier advance between about 1970 and 1990. To determine which climatic variables best correlate with glacier snout fluctuations, we consider a large set of seasonal predictors, based on our climatic dataset, and determine the most significant drivers by a stepwise regression technique. This in-depth screening indicates that the average glacier snout fluctuations strongly respond to summer temperature and winter precipitation variations, with a delay of 5 and 10 year, respectively. Snout fluctuations display also a significant (albeit weak) response to concurrent (same year) spring temperature and precipitation conditions. A linear regressive model based on these four climatic variables explains up to 93 % of the variance, which becomes 89 % when only the two delayed variables are taken into account. When employed for out-of-sample projections, the empirical model displays high prediction skill, and it is thus used to estimate the average glacier response to different climate change scenarios (RCP4.5, RCP8.5, A1B), using both global and regional climate models. In all cases, glacier snout fluctuations display a negative trend, and the glaciers of this region display an accelerated retreat, leading to a further regression of the snout position. By 2050, the retreat is estimated to be between about 300 and 400 m with respect to the current position. Glacier regression is more intense for the RCP8.5 and A1B scenarios, as it could be expected from the higher severity of these emission pathways.     

Audience Response to Values-based Marketplace Advocacy by the Fossil Fuel Industries

A form of issue advocacy, marketplace advocacy campaigns often arise in response to burgeoning societal concerns, especially those faced by energy industries. Although these campaigns may include brief and selective references to corporate activities, most campaigns place a much stronger emphasis on commonly shared societal values. This study examines audience response to values-based environmental marketplace advocacy messages by the fossil fuel industries through a series of focus groups. Four instrumental values were identified in campaign videos (innovation, community, resilience, and patriotism), and the terminal value of pragmatism, especially as it relates to environmental issues, was identified as a result of identification with one or more of the instrumental values. The findings are discussed through the lens of extant research on marketplace advocacy and organizational values as well as Habermas's theory of refuedalization, shedding light on the ways corporations appeal to commonly held societal values in an effort to generate support for a given industry.     

Monitoring of Benzene in Ambient Air with Organic Vapor Badges

The original Texas Intersection Model (TEXIN) for air quality near street intersections has been widely adopted across the nation. At the request of transportation agencies from several states, the TEXIN model was revised to improve its performance and flexibility. The new capabilities include T-intersections, one-way streets, four-way stops, inspection/maintenance capabilities, anti-tampering programs and a short-cut emissions algorithm. TEXIN2 uses the CMA procedures for estimating traffic flow parameters, MOBILE3 to determine free flowing traffic cruise emissions, and CALINE3 to model the pollutant distribution downwind of an intersection. The new model, TEXIN2, offers the user more accurate simulations with enhanced versatility while still requiring a minimal amount of input data.