Use of wetlands for water quality improvement under the USEPA Region V Clean Lakes Program

The United States Environmental Protection Agency (USEPA) Region V Clean Lakes Program employs artificial and modified natural wetlands in an effort to improve the water quality of selected lakes. We examined use of wetlands at seven lake sites and evaluated the physical and institutional means by which wetland projects are implemented and managed, relative to USEPA program goals and expert recommendations on the use of wetlands for water quality improvement. Management practices recommended by wetlands experts addressed water level and retention, sheet flow, nutrient removal, chemical treatment, ecological and effectiveness monitoring, and resource enhancement. Institutional characteristics recommended included local monitoring, regulation, and enforcement and shared responsibilities among jurisdictions. Institutional and ecological objectives of the National Clean Lakes Program were met to some degree at every site. Social objectives were achieved to a lesser extent. Wetland protection mechanisms and appropriate institutional decentralization were present at all sites. Optimal management techniques were employed to varying degrees at each site, but most projects lack adequate monitoring to determine adverse ecological impacts and effectiveness of pollutant removal and do not extensively address needs for recreation and wildlife habitat. There is evidence that the wetland projects are contributing to improved lake water quality; however, more emphasis needs to be placed on wetland protection and long-term project evaluation.     

HYDROGEOCHEMICAL RELATIONSHIPS USING PARTIAL CORRELATION COEFFICIENTS1

ABSTRACT: Sixty-nine groundwater samples were analyzed for six chemical parameters. Partial and simple correlation coefficients for these parameters indicate that partial coefficients are superior to simple coefficients in establishing geochemical relationships for the aqueous system evaluated. The improved reliability arises from the ability of partial correlation analysis to hold outside factors that may be affecting the two variables of interest, constant.     

EFFECTS OF WOODY VEGETATION ON SANDY LEVEE INTEGRITY1

he influence of woody vegetation on the reliability of a sandy levee was investigated using field data in seepage and slope stability analyses. Field data were collected from selected sites within a 10-km segment of a channel levee on the Sacramento River near Elkhorn, California. Root architecture and distribution were determined using the profile-wall method in which root cross sections were exposed in the vertical wall of an excavated trench. Transects running both parallel and perpendicular to the crest of the levee were excavated at six sites. Each site was dominated by different plant species: five sites were adjacent to trees or woody shrubs, while one supported only herbaceous growth. Lateral plant roots were primarily restricted to, and modified, the near-surface soil horizons to a depth of approximately 1 meter. Root area ratios (RARs) did not exceed 2.02 percent and generally decreased exponentially with depth. At depths greater than 20 cm, mean RARs for sites dominated by wood species were not significantly different from the mean RAB for the herbaceous site. No open voids clearly attributable to plant roots were observed. Roots reinforced the levee soil and increased shear resistance in a measurable manner. Infinite slope and circular arc stability analyses were performed on the landward and riverward slopes under different hydraulic loading conditions. Infinite slope analyses indicated increasing root area ratio from 0.01 percent to 1 percent increased the factor of safety from less than one to more than seven. Circular arc analyses indicated that even the lower measured root concentrations sufficed to increase safety factors for arcs with maximum depths of about 1 m from less than one to about 1.2. Our findings suggest that allowing woody shrubs and small trees on levees would provide environmental benefits and would enhance structural integrity without the hazards associated with large trees such as wind-throwing.     

The effect of turnover on work satisfaction and mental health: Support for a situational perspective

This study finds support for the situational approach to affect determination in a prospective, two-year longitudinal field study. Specifically, turnover was shown to predict changes in subsequent job measures of work satisfaction and mental health. Employees who changed jobs and occupations showed greater increases in both work satisfaction and mental health than employees who only changed jobs or employees who remained in their initial positions. Further research directions are introduced.     

Reduction of sampling and analytical errors for electron microscopic analysis of atmospheric aerosols

Electron microscopy-energy dispersive spectroscopy (EM/EDS) can be used to determine the elemental composition of individual particles. However, the accuracy with which atmospheric particle compositions can be quantitatively determined is not well understood. In this work we explore sources of sampling and analytical bias and methods of reducing bias. Sulfuric acid [H₂SO₄] and ammonium sulfate [(NH₄)₂SO₄] particles were collected on beryllium, silicon, and carbon substrates with similar deposition densities. While [(NH₄)₂SO₄] particles were observed on all substrates, [H₂SO₄] and ammonia-treated [H₂SO₄] particles could not be found on beryllium substrates. Interactions between the substrate and sulfuric acid particles are implicated. When measured with EM/EDS, [H₂SO₄] particles exposed to ammonia overnight were found having lower beam damage rates (0.000 ± 0.002 fraction s⁻¹) than those without any treatment (0.023 ± 0.006 fraction s⁻¹) For laboratory-generated [C₁₀H₆(SO₃Na)₂] particles, the composition determined using the experimental k-factors evaluated from independent particle standards of similar composition and size shows an error less than 20% for all constituents, while greater than 78% errors were found when k-factors were calculated from the theory. This study suggests (1) that sulfate beam damage can be reduced by exposure of atmospheric particle samples to ammonia before analysis, (2) that beryllium is not a suitable substrate for atmospheric particle analysis, and (3) calibration (k-factor determination) using particle standards of similar size and composition to particles present in the atmosphere shows promise as a way of improving the accuracy of quantitative EM analysis.     

Real-world vehicle emissions: a summary of the 14th coordinating research council on-road Vehicle Emissions Workshop

The Coordinating Research Council held its 14th Vehicle Emissions Workshop in March 2004, where results of the most recent on-road vehicle emissions research were presented. We summarize ongoing work from researchers who are engaged in improving our understanding of the contribution of mobile sources to ambient air quality and emission inventories. Participants in the workshop discussed efforts to improve mobile source emission models, light- and heavy-duty vehicle emissions measurements, on- and off-road emissions measurements, effects of fuels and lubricating oils on emissions, as well as topics for future research.     

Real-world vehicle emissions: a summary of the Thirteenth Coordinating Research Council On-Road Vehicle Emissions Workshop

The Coordinating Research Council held its thirteenth Vehicle Emissions Workshop in April 2003, when results of the most recent on-road vehicle emissions research were presented. Ongoing work from researchers who are engaged in improving understanding of the contribution of mobile sources to ambient air quality and emission inventories is summarized here. Participants in the workshop discussed efforts to improve mobile source emission models, the role of on-board diagnostic systems in inspection and maintenance programs, light- and heavy-duty vehicle emissions measurements, on- and off-road emissions measurements, effects of fuels and lubricating oils on emissions, as well as topics for future research.     

Environmental assessment of 5-ethylidene-2-norbornene using modeled and measured fate and effects results

Several predictive models were used to assess aquatic exposure, persistence (P) and potential for long-range transport (LRT) of 5-ethylidene-2-norbornene (ENB). Such estimations are components of the assessment process for persistent, bioaccumulative and toxic (PBT) substances, which are also referred to as persistent organic pollutants (POPs). An ecological exposure assessment for ENB from manufacturing activities was conducted based on physical/chemical properties, monitoring data, and degradation, transport and distribution estimates. Based on the results of several model predictions, chronic exposure of aquatic organisms is not expected, due to the anticipated residence time of ENB in aquatic ecosystems. These modeled results consistently predict ENB does not present the potential to persist in the environment. Volatilization from water to the air is calculated to occur at a relatively rapid rate for ENB based on its Henry's Law constant. Once in the air, ENB is expected to degrade rapidly due to oxidation by hydroxyl radicals and ozone based on calculated atmospheric half-lives of 57 and 27 min, respectively. Additionally, ENB is not predicted to undergo long-range transport based on the short atmospheric half-life due to oxidation by hydroxyl radicals and ozone. Additionally, based on predicted exposure from site-specific emission using the EPA model EFAST, ENB is not expected to reach concentrations of concern for chronic aquatic toxicity endpoints.     

Stable isotope fractionation analysis as a tool to monitor biodegradation in contaminated acquifers

The assessment of biodegradation in contaminated aquifers has become an issue of increasing importance in the recent years. To some extent, this can be related to the acceptance of intrinsic bioremediation or monitored natural attenuation as a means to manage contaminated sites. Among the few existing methods to detect biodegradation in the subsurface, stable isotope fractionation analysis (SIFA) is one of the most promising approaches which is pronounced by the drastically increasing number of applications. This review covers the recent laboratory and field studies assessing biodegradation of contaminants via stable isotope analysis. Stable isotope enrichment factors have been found that vary from no fractionation for dioxygenase reactions converting aromatic hydrocarbons over moderate fractionation by monooxygenase reactions (epsilon=-3 per thousand) and some anaerobic studies on microbial degradation of aromatic hydrocarbons (epsilon=-1.7 per thousand) to larger fractionations by anaerobic dehalogenation reactions of chlorinated solvents (epsilon=between -5 per thousand and -30 per thousand). The different isotope enrichment factors can be related to the respective biochemical reactions. Based on that knowledge, we discuss under what circumstances SIFA can be used for a qualitative or even a quantitative assessment of biodegradation in the environment. In a steadily increasing number of cases, it was possible to explain biodegradation processes in the field based on isotope enrichment factors obtained from laboratory experiments with pure cultures and measured isotope values from the field. The review will focus on the aerobic and anaerobic degradation of aromatic hydrocarbons and chlorinated solvents as the major contaminants of groundwater. Advances in the instrumental development for stable isotope analysis are only mentioned if it is important for the understanding of the application.