A cross-country comparison of short- and long-term effects of an ergonomic intervention on musculoskeletal discomfort, eyestrain and psychosocial stress in VDT operators: selected aspects of the international project.

Three groups of data entry female visual display terminal (VDT) workers from Norway (n = 30), Poland (n = 33) and the USA (n = 29) were compared. Before intervention, the Norwegian group reported more neck pain compared with the Polish group. The Polish group reported less shoulder pain than both the U.S. and the Norwegian groups. The clinical examination documented fewer symptoms and signs of musculoskeletal illness among the Polish participants compared with the Norwegian and the U.S. groups. After intervention, the Norwegian group reported a reduction in neck pain while the U.S. group reported a reduction in shoulder pain. The Polish group reported an increase in neck, shoulder and forearm pain at follow-up compared to after intervention. The Polish group recorded higher flexion of the upper arm at follow-up parallel with an increase of pain in the upper part of the body. Visual discomfort showed variable results in the 3 countries.     

Heavy metal content of moss from Kampinos National Park in Poland

The results are presented of studies on the content of Zn, Pb, Cu, Ni and Cd inPleurozium schreberi moss within the spatial system of Kampinos National Park (KPN) adjacent to the Warsaw urban agglomeration. Over a large area (64.3–78.3%) of the Park, mosses contain the following amounts of metals in mg kg^–1 dw: 80–120 of Zn, 60–80 of Pb, 10–15 of Cu, 4–8 of Ni and 0.6–0.9 of Cd. All trace metals were found to accumulate in elevated amounts in moss in the south-eastern portion of the Park bordering the urban area, and it is this part of the Park that should be considered as most polluted by heavy metals.     

The levels and composition of persistent organic pollutants in alluvial agriculture soils affected by flooding

The concentrations and composition of persistent organic pollutants (POPs) were determined in alluvial soils subjected to heavy flooding in a rural region of Poland. Soil samples (n?=?30) were collected from the upper soil layer from a 70-km² area. Chemical determinations included basic physicochemical properties and the contents of polychlorinated biphenyls (PCBs), hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs) and polycyclic aromatic hydrocarbons (PAHs, 16 compounds). The median concentrations of Σ7PCB (PCB28?+?PCB52?+?PCB101?+?PCB118?+?PCB138?+?PCB153?+?PCB180), Σ3HCH (α-HCH?+?β-HCH?+?γ-HCH) and Σ3pp′(DDT?+?DDE?+?DDD) were 1.60?±?1.03, 0.22?±?0.13 and 25.18?±?82.70 μg kg^?1, respectively. The median concentrations of the most abundant PAHs, phenanthrene, fluoranthene, pyrene, benzo[b]fluoranthene and benzo[a]pyrene were 50?±?37, 38?±?27, 29?±?30, 45?±?36 and 24?±?22 μg kg^?1, respectively. Compared with elsewhere in the world, the overall level of contamination with POPs was low and similar to the levels in agricultural soils from neighbouring countries, except for benzo[a]pyrene and DDT. There was no evidence that flooding affected the levels of POPs in the studied soils. The patterns observed for PAHs and PCBs indicate that atmospheric deposition is the most important long-term source of these contaminants. DDTs were the dominant organochlorine pesticides (up to 99 %), and the contribution of the parent pp′ isomer was up to 50 % of the ΣDDT, which indicates the advantage of aged contamination. A high pp′DDE/pp′DDD ratio suggests the prevalence of aerobic transformations of parent DDT. Dominance of the γ isomer in the HCHs implies historical use of lindane in the area. The effect of soil properties on the POP concentrations was rather weak, although statistically significant links with the content of the <0.02-mm fraction, C_total or N_total were observed for some individual compounds in the PCB group.     

Thirty-year trends in suspended sediment in seven Lake Erie tributaries

Sediment is an important pollutant for Lake Erie and its tributaries as a carrier of other substances and as a pollutant in its own right. Environmental managers have called for major reductions in sediment loadings in Lake Erie tributaries. In this study, 30-yr (1975-2005) datasets with daily resolution are analyzed to identify and interpret trends in sediment concentrations and loads in major US tributaries to Lake Erie. The Maumee and Sandusky Rivers in agricultural northwest Ohio show continual decreases throughout this period, but the River Raisin shows increases, especially in the last decade. The urban and forested Cuyahoga River shows little trend before 2000 but shows increases since then. The mostly forested Grand River shows strong decreases before 1995, little change thereafter until the early 2000s, and then increases. In most cases, the greatest decreases or smallest increases, depending on the river, are associated with summer and fall and with low flow conditions, whereas the smallest decreases or greatest increases are associated with the spring and with high flow conditions. Analysis of concentration-flow relationships indicates that these changes are not due to weather but reflect positive and negative anthropogenic influences. Sediment decreases in the northwestern Ohio tributaries seem to reflect the successful use of agricultural practices to reduce erosion and prevent sediment loss. Opportunities for further reductions in sediment loads and concentrations lie in better management of sediment losses during winter and spring.     

Adsorption/Desorption of Polyvinyl Alcohol on Solid Substrates and Relevant Biodegradation

The rates and extents of absorption and desorption of polyvinyl alcohol (PVA) samples on different solid substrates comprising montmorillonite, quartz sand, and farm soil, as well as humic acid mixture are reported. The uptake of PVA by the substrates was analyzed as a function of PVA hydrolysis (72–98%), molecular weight, and molecular weight distribution. Higher adsorption was detected on montmorillonite followed by farm soil, whereas the quartz sand did not display any specific adsorption affinity for the PVA. An increase in the hydrolysis degree of PVA increased the adsorption rate and extent whereas this feature was reversed by an increase in PVA molecular weight. The desorption of PVA samples from the different substrates was performed both under various pH conditions and in the presence of concentrated HF that was used to dissolve the silicon derivatives present in the substrates. Biodegradation experiments carried out in liquid cultures of PVA adsorbed on montmorillonite showed that the mineralization of the adsorbed PVA was much lower than that detected for the nonadsorbed PVA. This investigation suggests that irreversible adsorption of PVA on the clay component occurs in soil, thus substantially inhibiting PVA biodegradation.     

Increasing seat belt use through PI&E and enforcement: The Thumbs Up campaign

Campaigns to increase seat belt use have been effective in controlled environments, in small geographic areas, in primary enforcement states, and when conducted in conjunction with the enactment of seat belt legislation. The Thumbs Up project was undertaken to determine if belt use could be facilitated in less advantageous conditions. A 3-month campaign to increase seat belt use was conducted in two sites, each consisting of two Florida counties. At its conclusion, the Thumbs Up project did not yield an overall increase in seat belt use across the two sites. However, observed seat belt use and the number of seat belt citations issued increased significantly in one site. The results are discussed in terms of the two components necessary for a successful campaign: public information and education, and enforcement. Further, recommendations for conducting successful community-based seat belt interventions are offered.     

Optimisation of pressurised liquid extraction for elimination of sulphur interferences during determination of organotin compounds in sulphur-rich sediments by gas chromatography with flame photometric detection

A simple method for species-selective analysis of organotin compounds (OTCs) (butyl and phenyl) in sediments was developed. The sample preparation procedure was specifically optimised for sulphur-rich sediments to eliminate interferences from elemental sulphur and organosulphur compounds. Tin species were extracted from sediment samples using pressurised liquid extraction technique (PLE), ethylated - with simultaneous extraction to isooctane - in aqueous phase with sodium tetraethylborate (NaBEt(4)) and separated/detected by gas chromatography with flame photometric detection (GC-FPD). PLE operational variables (extraction temperature and pressure, solvent composition and number of static extraction steps) and extract handling routine were fine-tuned to minimise the amount of extracted interferents while keeping OTCs recovery at an acceptable level. Best results were obtained after extraction of sediment samples with methanol/water (75% v/v methanol) solution of acetic acid/sodium acetate with tropolone addition (0.6 g l(-1)). Derivatisation of low temperature, high-pressure (50 degrees C, 13.8 MPa) extracts gives isooctane extracts which are clean enough to be directly analysed by GC-FPD without any further cleanup. Interferences from elemental sulphur were completely eliminated while concentrations of other interferents were reduced to the level not impairing quantitation of OTCs under the study. No negative effects in terms of chromatographic column deterioration were observed after repeated injections of such extracts. Two certified reference materials, BCR646 and PACS-2, were analysed to assess performance of the method. Recoveries of all OTCs under the study, except MBT, were in the range of 91-114%. MBT extraction efficiency was low (34-47%) therefore the method is unsuitable for precise determinations of this compound.     

Emissions from charbroiling and grilling of chicken and beef

Emission rates for fine particle (<2.5 microm) mass (PM2.5), carbon (organic/elemental), inorganic ions (SO4(2-), NO3-, NH4+), elements (primarily metals), and speciated organic compounds are reported for charbroiling hamburger, steak, and chicken. The PM2.5 rates for charbroiling meats ranged from 4.4 to 11.6 g/kg of uncooked meat in this study. No mass-emission rates are available from grilling, but the speciated organic data are available for these samples. Emission rates varied by type of appliance, meat, meat-fat content, and cooking conditions. High-fat hamburger cooked on an underfired charbroiler emitted the highest amount of PM2.5. The emissions were almost exclusively composed of organic carbon, with small amounts of elements and inorganic ions. Water-soluble K+ and Cl-, which are used as indicators of wood smoke in source apportionment studies, were also present in meat-cooking emissions. The speciated organic compounds that were measured include polycyclic aromatic hydrocarbons (PAHs), cholesterol, and the long-chain gamma-lactones. Charbroiling emissions yielded an average of approximately 3-5 times more PAHs, approximately 20 times more cholesterol, and approximately 10 times more lactones than grilling. These data were utilized in the ambient source apportionment analysis for the 1997 Northern Front Range Air Quality Study source apportionment.