Development and application of long-term sublethal whole sediment tests with Arenicola marina and Corophium volutator using Ivermectin as the test compound

Short-term whole sediment tests using the amphipod Corophium volutator and the polychaete Arenicola marina are now routinely used in Europe to assess the acute toxicity of marine sediments. However, there is still a need to develop longer-term assays which measure effects on sublethal endpoints that are more relevant to predicting impacts at the population level. The effect of increasing exposure times and measuring additional endpoints such as growth, on the sensitivity of these assays was investigated. The test compound used was the chemotherapeutant Ivermectin (IVM), used in aquaculture to treat sea lice infestations. IVM was found to be acutely toxic to both test organisms. Extending the lugworm test to 100 days increased sensitivity of survival by a factor of three; a significant reduction in casting rate was observed at concentrations an order of magnitude lower. This assay shows potential for detecting the sublethal effects of low concentrations of sediment contaminants. Increasing the exposure time did not seem to affect the sensitivity of the amphipod, but further method development is required.     

An improvement selection methodology for key performance indicators

Key performance indicators (KPIs) are critical measures for determining the health of a manufacturing plant in relationship to the plant’s goals. In today’s competitive environment, manufacturers cannot be careless about their business; in fact, they must ensure that their KPIs are effective and use them to make improvements when necessary. This paper describes a method for suggesting improvements to a manufacturer’s KPIs, based on the results achieved from a workshop to score the KPI on a number of predefined criteria. The approach uses a prospect theory approach to weight the scoring. Different problem formulations were derived that allow for both recommendations for improvements and the recommendations for disinvestments to over-performing KPIs. The authors applied the developed approach to two workshop outputs, each from independent manufacturers, and the results highlighted the significant difference between the two manufacturers in terms of improvement priorities and KPI assessment. The optimal improvement suggestions were compared to those found through a fast heuristic. It was determined that given the underlying assumptions of the approach that the heuristic solutions were just as adequate as the optimal ones.     

Climate change,food security,and livelihoods in sub-Saharan Africa

Sub-Saharan Africa is particularly vulnerable to climate change. Multiple biophysical, political, and socioeconomic stresses interact to increase the region’s susceptibility and constrain its adaptive capacity. Climate change is commonly recognized as a major issue likely to have negative consequences on food security and livelihoods in the region. This paper reviews three bodies of scholarship that have evolved somewhat separately, yet are inherently interconnected: climate change impacts, vulnerability and adaptation, food security, and sustainable livelihoods. The paper develops a conceptualization of the relationships among the three themes and shows how food security’s vulnerabilities are related to multiple stresses and adaptive capacities, reflecting access to assets. Food security represents one of several livelihood outcomes. The framework shows how several research paradigms relate to the issue of food security and climate change and provides a guide for empirical investigations. Recognizing these interconnections can help in the development of more effective policies and programs. The framework is applied here to synthesize findings from an array of studies in sub-Saharan Africa dealing with vulnerability to climate change, food security, and livelihoods.     

Utilizing international networks for accelerating research and learning in transformational sustainability science

A promising approach for addressing sustainability problems is to recognize the unique conditions of a particular place, such as problem features and solution capabilities, and adopt and adapt solutions developed at other places around the world. Therefore, research and teaching in international networks becomes critical, as it allows for accelerating learning by sharing problem understandings, successful solutions, and important contextual considerations. This article identifies eight distinct types of research and teaching collaborations in international networks that can support such accelerated learning. The four research types are, with increasing intensity of collaboration: (1) solution adoption; (2) solution consultation; (3) joint research on different problems; and (4) joint research on similar problems. The four teaching types are, with increasing intensity of collaboration: (1) adopted course; (2) course with visiting faculty; (3) joint course with traveling faculty; and (4) joint course with traveling students. The typology is illustrated by extending existing research and teaching projects on urban sustainability in the International Network of Programs in Sustainability, with partner universities from Europe, North America, Asia, and Africa. The article concludes with challenges and strategies for extending individual projects into collaborations in international networks.     

Bedding and within-pen location effects on feedlot pen runoff quality using a rainfall simulator

Soluble salts, nutrients, and pathogenic bacteria in feedlot-pen runoff have the potential to cause pollution of the environment. A 2-yr study (1998-1999) was conducted at a beef cattle (Bos taurus) feedlot in southern Alberta, Canada, to determine the effect of bedding material [barley (Hordeum vulgare L.) straw versus wood chips] and within-pen location on the chemical and bacterial properties of pen-floor runoff. Runoff was generated with a portable rainfall simulator and analyzed for chemical content (nitrogen [N], phosphorus [P], soluble salts, electrical conductivity [EC], sodium adsorption ratio [SAR], dissolved oxygen [DO], and pH) and populations of three groups of bacteria (Escherichia coli, total coliforms, total aerobic heterotrophs at 27 degrees C) in 1998 and 1999. Bedding had a significant (P < or = 0.05) effect on NH4-N concentration and load in 1999, SO4 load in 1998, SO4 concentration and load in 1999, and total coliforms in both years; where these three variables were higher in wood than straw pens. Location had a significant effect on EC and concentrations of total Kjeldahl nitrogen (TKN), Na, K, SO4, and Cl in 1998, and total coliforms in both years. These seven variables were higher at the bedding pack than pen floor location, indicating that bedding packs were major reservoirs of TKN, soluble salts, and total coliforms. Significantly higher dissolved reactive phosphorus (DRP), total P, and NH4-N concentrations and loads at the bedding pack location in wood pens in 1998, and a similar trend for TKN concentration in 1999, indicated that this bedding-location treatment was a greater source of nutrients to runoff than the other three bedding-location treatments. Bedding, location, and their interaction may therefore be a potential tool to manage nutrients, soluble salts, and bacteria in feedlot runoff.     

Phosphorus and nitrogen in rainfall simulation runoff after fresh and composted beef cattle manure application

Fresh beef cattle (Bos taurus) manure has traditionally been applied to cropland in southern Alberta, but there has been an increase in application of composted manure to cropland in this region. However, the quality of runoff under fresh manure (FM) versus composted manure (CM) has not been investigated. Our objective was to compare runoff quality under increasing rates (0, 13, 42, 83 Mg ha(-1) dry wt.) of FM and CM applied for two consecutive years to a clay loam soil cropped to irrigated barley (Hordeum vulgare L.). We determined total phosphorus (TP), particulate phosphorus (PP), dissolved reactive phosphorus (DRP), total nitrogen (TN), NH4-N, and NO3-N concentrations and loads in runoff after one (1999) and two (2000) applications of FM and CM. We found significantly (P < or = 0.05) higher TP, DRP, and NH4-N concentrations, and higher DRP and TN loads under FM than CM after 2 yr of manure application. The TP loads were also higher under FM than CM at the 83 Mg ha(-1) rate in 2000, and DRP loads were higher for FM than CM at this high rate when averaged over both years. Application rate had a significant effect on TP and DRP concentrations in runoff. In addition, the slope values of the regressions between TP and DRP in runoff versus application rate were considerably higher for FM in 2000 than for FM in 1999, and CM in both 1999 and 2000. Significant positive relationships were found for TP and DRP in runoff versus soil Kelowna-extractable P and soil water-extractable P for FM and CM in 2000, indicating that interaction of runoff with the soil controlled the release of P. Total P and DRP were the variables most affected by the treatments. Overall, our study found that application of CM rather than FM to cropland may lower certain forms of P and N in surface runoff, but this is dependent on the interaction with year, application rate, or both.     

Modeling methyl isothiocyanate soil flux and emission ratio from a field following a chemigation of metam-sodium

Metam-sodium had become the most heavily used soil fumigant in recent years as the deadline approached for methyl bromide to phase out in January 2005. After application, metam-sodium decomposes rapidly to methyl isothiocyanate (MITC), a highly toxic compound capable of killing a wide spectrum of soil-borne pests. Inhalation risk of MITC ranked high among airborne agricultural pesticides in California. Information about off-gassing intensity and percentage of emission is essential for exposure risk assessment and mitigation measures, but is limited, especially for new application methods such as drip chemigation. Air concentrations of MITC were monitored around a field treated with metam-sodium through surface drip irrigation system. The field was tarped with plastic films before the chemigation. The air concentrations at receptor locations were simulated for the period of air monitoring with the Industrial Source Complex (ISC3) Dispersion Model, and soil flux density of MITC at various periods after chemigation was estimated through a back-calculation procedure. The estimated soil flux density of MITC showed a diurnal pattern, with the daytime flux stronger than nighttime. However, the average air concentration at nighttime was higher than that at daytime. Soil flux density peaked at 4.30 microg m-2 s-1 in the first 12-h period after chemigation, then declined with time. The MITC emission percentage in the first 60-h was 2.65% of applied mass, of which 57% occurred in the first 24-h after chemigation. The study indicated that the tarped bed drip application method of metam-sodium had a relatively good control of MITC emission from soil.     

Photochemical and meteorological relationships during the Texas-II Radical and Aerosol Measurement Project (TRAMP)

The Moody Tower measurement site at the University of Houston experienced several large ozone events during the Texas-II Radical and Aerosol Measurement Project (TRAMP) campaign between 13 Aug–02 Oct, 2006. This rooftop site samples that atmosphere 70 m a.g.l. and consequently is less susceptible to local surface emissions. Several high-ozone episodes encountered at Moody Tower during the TRAMP campaign were preceded one to two days earlier by a cold front passage, creating a situation where polluted air is transported from the North interacts with local Houston emissions and with light local winds. High quality CO measurements were good indicators of long range transport of pollution and/or biomass burning. During TRAMP there were also 4 periods with low “background” CO characterized by southerly winds, overcast conditions and low NOx and O₃ mixing ratios. The summer and fall of 2000 was an unusually hot period in Houston with considerably higher ozone levels than the 2000–2007 climatology. The 2006 TRAMP time period is more representative of the typical conditions for these 8 years. Over the time period from 1991 to 2009 the number of 8-h ozone episode days in Houston has decreased, as have the peak 1-h ozone mixing ratios. It is not possible from this analysis to demonstrate whether these improvements in Houston air quality are due to reductions in NOx levels, VOCs levels, and/or changes in meteorology.     

Toward a robust analytical method for separating trace levels of nano-materials in natural waters: cloud point extraction of nano-copper(II) oxide

Cloud point extraction (CPE) factors, namely Triton X-114 (TX-114) concentration, pH, ionic strength, incubation time, and temperature, were optimized for the separation of nano-sized copper(II) oxide (nCuO) in aqueous matrices. The kinetics of phase transfer was studied using UV–visible spectroscopy. From the highest separation rate, the most favorable conditions were observed with 0.2 %?w/v of TX-114, pH?=?9.0, ionic strength of 10 mM NaCl, and incubation at 40 °C for 60 min, yielding an extraction efficiency of 89.2?±?3.9 % and a preconcentration factor of 86. The aggregate size distribution confirmed the formation of very large nCuO–micelle assemblies (11.9 μm) under these conditions. The surface charge of nCuO was also diminished effectively. An extraction efficiency of 91 % was achieved with a mixture of TX-100 and TX-114 containing 30 wt.% of TX-100. Natural organic and particulate matters, represented by humic acid (30 mg/L) and micron-sized silica particles (50 mg/L), respectively, did not significantly reduce the CPE efficiency (<10 %). The recovery of copper(II) ions (20 mg/L) in the presence of humic acid was low (3–10 %). The spiked natural water samples were analyzed either directly or after CPE by inductively coupled plasma mass spectrometry following acid digestion/microwave irradiation. The results indicated the influence of matrix effects and their reduction by CPE. A delay between spiking nCuO and CPE may also influence the recovery of nCuO due to aggregation and dissolution. A detection limit of 0.04 μg Cu/L was achieved for nCuO.