Effective method for extraction of larvicidal component from leaves of Azadirachta indica and Artemisia annua Linn

Leaves of Artemisia annua linn. and Azadirachta indica were extracted in petroleum ether and hexane respectively by different methods of extraction i.e. cold extraction, reflux extraction and soxhlet extraction. The crude extract obtained was tested against third instar larvae of Anopheles stephensi. On comparison of larval mortality of crude extract obtained by these three methods, both soxhlet and reflux extraction method showed 100% mortality at 200 ppm after 48 hr in case of A. annua. However LC50 (20 ppm) value of crude extract obtained by soxhlet extraction showed better results than reflux extraction (35 ppm) method after 72 hr. In case of A. indica, crude obtained by soxhlet showed 100% mortality (after 48 hr) at 250 ppm and LC50 of 69 ppm at 72 hr. Reflux extraction does not show any appreciable mortality even at 250 ppm concentration.     

Bio-accumulation of some trace metals in the short-neck clam Paphia malabarica from Mandovi estuary, Goa

Monthly collections of the clam Paphia malabarica were made for period of 1 year from May 2002 to April 2003 from Verem, Mandovi estuary, Goa. Clams were categorised into two groups, 25-35 mm (small size) and 35-40 mm (big size). Significant difference was not observed in the accumulation of metals in the whole soft tissue between the two size groups. Irrespective of size, annual mean, metal content recorded as microg/g dry weight in the whole soft tissue was 3.8, 30.3, 13.5, 36.6 and 105.7, respectively, for Cd, Pb, Cu, Zn and Fe. Of the two toxic elements Cd and Pb, Cd content was almost uniform throughout the year except for a rise in September for the small size and October for the big size. Pb, on the other hand, was low from the beginning of the monsoon and exhibited distinct accumulation from December onwards up to April, May and, to some extent, June. The pattern was similar in both the size groups, the values being higher for the bigger size group. The three essential elements Cu, Fe and Zn exhibit trends similar to one another with peaks in September and December-January in both the size groups. Cadmium accumulation was highest in the mantle and adductor muscle, Lead, in foot, Copper, in digestive gland and gonad, and Zn and Fe, in gills. Correlation coefficient between different metal couplings as tested statistically revealed significant coupling for Zn-Fe (r 0.92) in the bigger size group, the same was observed between Cu-Fe (r 0.62) and Cd-Zn (r 0.94). Seasonal difference in Pb accumulation was highly significant.     

Parameters affecting azoxystrobin and imidacloprid degradation in biobed substrates in the North Indian tropical environment

Abstract

This study reports degradation of azoxystrobin (AZOXY) and imidacloprid (IMIDA) in the rice straw (RS)/corn cob (CC) and peat (P)/compost (C)-based biomixtures. The effect of biomixture preconditioning (10?days incubation prior to pesticide application), pesticide concentration and moisture content was evaluated. Results suggested that conditioning of biomixture greatly affected IMIDA degradation where half-life (t_1/2) was reduced by 5–9 times. This was attributed to higher microbial biomass carbon content and dehydrogenase activity in the conditioned biomixtures. Pesticide application in the conditioned biomixture did not show any negative impact on soil microbial parameters. Both pesticides degraded at faster rate in the rice straw-based biomixtures than in the corn cob-based biomixtures. Degradation slowed down with increase in initial concentration of pesticides in biomixture and 1.6–3.0 (AZOXY) and 2.4–3.6 (IMIDA) times increase in t_1/2 values was observed. The moisture content of biomixture showed positive effect on degradation which increased when moisture content was increased from 60 to 80% water holding capacity. The effect was significant for IMIDA degradation in the corn cob-based biomixtures and AZOXY degradation in the peat biomixtures. The rice straw-based biomixtures were better in degrading AZOXY and IMIDA and can be used in biopurification systems.     

Recovery of lithium and cobalt from waste lithium ion batteries of mobile phone

In view of the stringent environmental regulations, availability of limited natural resources and ever increasing need of alternative energy critical elements, an environmental eco-friendly leaching process is reported for the recovery of lithium and cobalt from the cathode active materials of spent lithium-ion batteries of mobile phones. The experiments were carried out to optimize the process parameters for the recovery of lithium and cobalt by varying the concentration of leachant, pulp density, reductant volume and temperature. Leaching with 2 M sulfuric acid with the addition of 5% H₂O₂ (v/v) at a pulp density of 100 g/L and 75 °C resulted in the recovery of 99.1% lithium and 70.0% cobalt in 60 min. H₂O₂ in sulfuric acid solution acts as an effective reducing agent, which enhance the percentage leaching of metals. Leaching kinetics of lithium in sulfuric acid fitted well to the chemical controlled reaction model i.e. 1 ? (1 ? X)^1/3 = k_ct. Leaching kinetics of cobalt fitted well to the model ‘ash diffusion control dense constant sizes spherical particles’ i.e. 1 ? 3(1 ? X)^2/3 + 2(1 ? X) = k_ct. Metals could subsequently be separated selectively from the leach liquor by solvent extraction process to produce their salts by crystallization process from the purified solution.     

Atmospheric dry deposition to leaf surfaces at a rural site of India

Dry deposition flux of major ions (Na+, K+, Ca2+, Mg2+, NH4+, F-, Cl-, NO3- and SO4(2-) to natural surfaces [guava (Psidium guyava) and peepal (Ficus religiosa) leaves] are determined at Rampur, a rural site of semi-arid region of India. Dry deposition flux is the highest for Ca2+ on guava leaves and for NH4+ on peepal leaves. Overall dry deposition flux is higher on guava leaves than of peepal leaves. The variation in deposition flux may be due to surface characteristics (surface roughness) and arrangement of leaves. Peepal leaves are arranged along the axis of the stem, whereas guava leaves are at right angles to the stem. The deposition flux of cations contributes 66% and 76% of dry deposition of all major ions on guava and peepal leaves, respectively as soil is major contributor towards dry deposition flux in tropical regions. ANOVA revealed no significant seasonal difference in deposition, although there is a trend for higher in winter. Deposition velocities of NH4+, NO3- and SO4(2-) are greater on guava leaves than peepal leaves, which can be attributed to the rougher surface of the guava leaf.     

Magnitude of pesticidal contamination in winter vegetables from Hisar,Haryana

Monitoring of 80 winter vegetable samples during 1997–1998 for pesticidal contamination was carried out on GC-ECD and GC-NPD systems with capillary columns following multiresidueanalytical technique. The tested samples were found 100%contaminated with low but measurable amounts of pesticideresidues. Among the four major chemical groups, residue levels oforganophosphorous insecticides were highest followed bycarbamates, synthetic pyrethroids and organochlorines. About 32%of the samples showed contamination with organophosphorous andcarbamate insecticides above their respective MRL values. On thebasis of observations made in these studies, it is suggested thatmore extensive monitoring studies covering all vegetable cropsfrom different agro-climatic regions of the state be carried outto know exact level of pesticidal contamination, which may serveas basis for future policy on chemical use.     

Possibility of converting indigenous Salvadora persica L. seed oil into biodiesel in Pakistan

In this research study, biodiesel has been successfully produced from vegetable seed oil of an indigenous plant Salvadora persica L. that meets the international biodiesel standard (ASTM D6751). The biodiesel yield was 1.57 g/5 g (31.4% by weight) and the in-situ transesterification ester content conversion was 97.7%. The produced biodiesel density was 0.894 g/mL, its kinematic viscosity 5.51 mm²/s, HHV 35.26 MJ/kg, flash point 210°C, cetane no. 61, and sulfur content 0.0844%. Thermal analysis of the biodiesel showed that 97% weight loss was achieved at 595°C with total oxidation of the biodiesel. The production energy efficiency was 0.46% with a lab scale setup, assuming the volume fraction ratio (volume of the sample/total volume of the equipment used). The results revealed that single-step in-situ transesterification method is suitable for the production of biodiesel from S. persica seed oil.     

Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic

The present work includes a process for encapsulation by combining substantially simultaneously dry nonmetallic printed circuit boards (PCBs) powder and recycled high-density polyethylene (rHDPE) in an extruder to form a homogenous matrix. The extruded materials were then molded into standard tensile, flexural, and impact properties testing specimens. Nonmetallic PCB mainly consists of large amount of glass fiber–reinforced epoxy resin materials. Incorporation of 50 wt% nonmetallic PCB in rHDPE matrix had increased the flexural strength and modulus by 35% and 130%, respectively. Tensile strength reported to be constant without much improvement. However, the Young’s modulus has increased by 180%, with incorporation of 50 wt% nonmetallic PCB. The addition of 6 phr (parts per hundred) maleated polyethylene (MAPE) resulted in 2-fold increase in tensile and flexural strength. Regarding the leaching properties, Cu was identified as the metal that leached at the highest level from the raw nonmetallic PCB, at 59.09 mg/L. However, after the nonmetallic PCB was filled in rHDPE/PCB composites, the concentration of Cu was reduced far below the regulatory limit, to only 3 mg/L. Thermal properties of composites were studied, and it was found out that incorporation of nonmetallic PCB fillers in rHDPE resulted in low thermal conductivity, whereas mechanical strength of the composites showed maximum improvements at 220 °C. Overall, the encapsulation technique using nonmetallic PCB waste has formed a monolithic waste form that provides a barrier to the dispersion of wastes into the environment.

ImplicationsNonmetallic materials reclaimed from waste PCBs were used to analyze the chemical composition, and it was found that nonmetalllic PCBs mainly consist of glass fiber–reinforced epoxy resin materials. With such millions of glass fibers in nonmetallic PCBs, there are mass-excellent supporting bodies that enhance the mechanical properties of composites. In fact, utilization of nonmetallic PCB waste as filler in composites can dramatically restrain the solubility of heavy metals in leachate solution, thus making it safe to be used in practical products.     

Biodegradation of C.I. Acid Red 1 by indigenous bacteria <Emphasis Type="Italic">Stenotrophomonas</Emphasis> sp. BHUSSp X2 isolated from dye contaminated soil

A significant proportion of xenobiotic recalcitrant azo dyes are being released in environment during carpet dyeing. The bacterial strain Stenotrophomonas sp. BHUSSp X2 was isolated from dye contaminated soil of carpet industry, Bhadohi, India. The isolated bacterial strain was identified morphologically, biochemically, and on the basis of 16S rRNA gene sequence. The isolate decolorized 97 % of C.I. Acid Red 1 (Acid RED G) at the concentration of 200 mg/l within 6 h under optimum static conditions (temperature ?35 °C, pH 8, and initial cell concentration 7?×?10⁷ cell/ml). Drastic reduction in dye degradation rate was observed beyond initial dye concentration from 500 mg/l (90 %), and it reaches to 25 % at 1000 mg/l under same set of conditions. The analysis related to decolorization and degradation was done using UV-Vis spectrophotometer, HPLC, and FTIR, whereas the GC-MS technique was utilized for the identification of degradation products. Phytotoxicity analysis revealed that degradation products are less toxic as compared to the original dye.