Irrigation of broccoli and canola with boron- and selenium-laden effluent

Selenium (Se), boron (B), and salinity contamination of agricultural drainage water is potentially hazardous for water reuse strategies in central California. To demonstrate the feasibility of using plants to extract Se from drainage water, Se accumulation was determined in canola (Brassica napus L.) and broccoli (Brassica oleracea L.) irrigated with drainage effluent in the San Joaquin Valley, California. In the 2-yr field study, both crops were irrigated with a typical drainage water containing Se (150 microg L(-1)), B (5 mg L(-1)), and a sulfate dominated salinity (EC of 7 dS m(-1)). Total dry matter yields were at least 11 Mg ha(-1) for both canola and broccoli, and plant tissue Se concentrations did not exceed 7 mg kg(-1) DM for either crop. Based on the amount of soluble Se applied to crops with drainage water and the estimated amount of soluble Se remaining in soil to a depth of 90 cm at harvest, both canola and broccoli accumulated at least 40% of the estimated soluble Se lost from the soil for both years. Applied Se not accounted for in plant tissue or as soluble Se in the soil was presumably lost by biological volatilization. This study suggests that irrigating two high value crops such as canola and broccoli with Se-laden effluent helps manage Se-laden effluent requiring treatment, and also produces economically viable Se-enriched crops. Future research should focus on managing residual salt and B in the soil for sustaining long time water reuse strategies.     

Building disaster-resilient communities: The road to the second World Conference on Disaster Reduction, January 2005, Kobe, Hyogo, Japan

The statistics paint a shocking picture: Over the past ten years around 7,000 ‘natural’ disasters have occurred, killing more than 300,000 people and resulting in over US$800 billion in economic losses (Munich Re, 2003). Increasing interest in global warming has provoked intense debate on the issue of climate change and its implications for more frequent and intense extreme weather events, placing more people at risk than ever. While all countries may be threatened by natural hazards, experience shows that developing countries are disproportionately affected, with losses sometimes exceeding years of hard‐won and desperately needed economic development. The World Conference on Disaster Reduction,1 to be held in Japan in 2005, aims to address these and other crucial issues that are posing an unprecedented challenge to the international community.     

Influence of Fibers on the Mechanical Properties of Cassava Starch Foams

The utilization of renewable resources in packaging can provide solutions to ecological problems such as waste quantity. Agricultural resources are alternative raw materials, among which there is starch, a natural polysaccharide that can be used to form resistant foam under wet and warm conditions. The starch foam is obtained by thermo pressing process where cassava starch, water and additives are processed to form a rigid structure by swelling, gelatinization and network formation. Natural fibers can be used to improve the mechanical properties of starch foams. In this project was investigated the influence of the addition of fibers in the levels of 1, 2 and 3% of cassava (short fiber) and 1, 2 and 3% of wheat fiber (powered fiber) in the starch dough. The foams were characterized by physical methods of strength, flexibility, density and by Scanning Electron Microscopy (SEM). The increase in fibers quantity has resulted in foams with higher density and less flexibility, whatever the fiber type. Most fibers quantity did not improve the foam strength. Foam made with 1% of cassava fiber showed higher compression strength; by increasing the percentage quantity there was a decrease on the compression resistance. Foam made with wheat fiber presented a lower result in 2%. The fiber type had no statistical significance in strength, flexibility and density foam. Only the fiber quantity was significant. The results showed that both fibers presented limited dimensions to improve the reinforcement of the starch foams up to 1%.     

The dispersion of 137Cs and 239,240Pu in the Rhone River plume: a numerical model

A numerical three dimensional model to simulate the transport of Cs and Pu by the Rhone River plume has been developed. The model solves the hydrodynamic equations, including baroclinic terms (that account for density variations) and a turbulence model, the suspended matter equations, including several particle classes simultaneously, settling, deposition and erosion of the sediment, and the radionuclide dispersion equations. Exchanges of radionuclides between the liquid and solid phases are described in terms of kinetic transfer coefficients. The dependence of these coefficients with water salinity is explicitly included in the model since it changes from freshwater to seawater values in the model domain. Computed activity levels in water, suspended matter and bed sediments are, in general, in agreement with measurements in the area. The model can also give a wide amount of information, as distribution coefficients for total suspended matter and sediments and for each particle class, fractions of radionuclides fixed to solid particles, and vertical profiles of radionuclides and distribution coefficients.     

Reconstruction of 137Cs signal in Cuba using 7Be as tracer of vertical transport processes in the atmosphere

Levels of 137Cs and 7Be in aerosols have been measured in the region of Cienfuegos (Cuba) during the period 1994-1998. 137Cs showed the same seasonal trend as 7Be and the monthly regimes of precipitation seemed to be responsible for the observed pattern. The 137Cs/7Be ratio obtained in Cienfuegos and Miami (FL) in this period was used to calibrate the long-term database of 137Cs concentrations recorded in Miami (250 km from Cienfuegos). The database was then employed to reconstruct the 137Cs monthly concentrations in Cienfuegos since 1957.     

Yeasts as a model for assessing the toxicity of the fungicides Penconazol, Cymoxanil and Dichlofluanid

In the present work the sensitivity of yeast strains of Kluyveromyces marxianus, Pichia anomala, Candida utilis, Schizosaccharomyces pombe and Saccharomyces cerevisiae, to the fungicides cymoxanil, penconazol, and dichlofluanid, was evaluated. Dichlofluanid induced the most negative effects, whereas penconazol in general was not very toxic. Overall, our results show that the parameters IC50 for specific respiration rates of C. utilis and S. cerevisiae and C(D) for cell viability of S. cerevisiae can be applied to quantify the toxicity level of the above compounds in yeast. Hence, could be explored as an alternative or at least as a complementary test in toxicity studies and, therefore, its potential for inclusion in a tier testing toxicity test battery merits further research.     

Norovirus Contamination of Bell Pepper from Handling During Harvesting and Packing

To evaluate the impact of harvesting and packinghouse operation on the contamination of green bell pepper (GBP) with viruses and enteric bacteria. Hands of 97 workers plus 40 GBP were sampled from field and packinghouse areas. RT-nested PCR were used for the identification of Noroviruses (NV) and Chromogenic agar for the quantification of coliforms and Escherichia coli. NV was found in 30.9 and 23.7% of workers’ hands, before and after 3 h of work, respectively, while 45 and 30% of field and packed GBP was positive for NV. Fecal coliforms and Escherichia coli were present in 68 and 57.3% and 12.4 and 11.1% of workers’ hands before and after 3 h of work, respectively. Fecal coliforms were detected in 85 and 15% of field and packed GBP, respectively, while E. coli was absent. There was no significant correlation between bacterial indicator and NV in the analyzed samples (P > 0.05). Handling of fresh produce by workers during harvesting and packing operations has negative impacts on fresh produce safety.     

Mercury in sediments and vegetation in a moderately contaminated salt marsh (Tagus Estuary, Portugal)

Depth variations of total mercury (Hg) and methylmercury (MeHg) concentrations were studied in cores from non-colonized sediments, sediments colonized by Halimione portulacoides, Sarcocornia fruticosa and Spartina maritima and belowground biomass, in a moderately contaminated salt marsh (Tagus Estuary, Portugal). Concentrations in belowground biomass exceeded up to 3 (Hg) and 15 (MeHg) times the levels in sediments, and up to 198 (Hg) and 308 (MeHg) times those found in aboveground parts. Methylmercury in colonized sediments reached 3% of the total Hg, 50 times above the maximum values found in non-colonized sediments. The absence of correlations between total Hg concentrations in sediments and the corresponding MeHg levels suggested that methylation was only dependent on the environmental and microbiological factors. The analysis of belowground biomass at high-depth resolution (2 cm) provided evidence that Hg and MeHg were actively absorbed from sediments, with higher enrichment factors at layers where higher microbial activity was probably occurring. The results obtained in this study indicated that the biotransformation of Hg to the toxic MeHg could increase the toxicity of plant-colonized sediments.     

Why the Use of Adenoviruses as Water Quality Virologic Marker?

Adenovirus is the virus that contains the highest amount of features favorable to its use as a virologic marker for water quality. Those pathogens are resistant on the environment, abundant, easily detected by molecular methods and are of great importance in public health.     

Safety culture: analysis of the causal relationships between its key dimensions

INTRODUCTION: Several fields are showing increasing interest in safety culture as a means of reducing accidents in the workplace. The literature shows that safety culture is a multidimensional concept. However, considerable confusion surrounds this concept, about which little consensus has been reached. METHOD: This study proposes a model for a positive safety culture and tests this on a sample of 455 Spanish companies, using the structural equation modeling statistical technique. RESULTS: Results show the important role of managers in the promotion of employees' safe behavior, both directly, through their attitudes and behaviors, and indirectly, by developing a safety management system. IMPACT ON INDUSTRY: This paper identifies the key dimensions of safety culture. In addition, a measurement scale for the safety management system is validated. This will assist organizations in defining areas where they need to progress if they wish to improve their safety. Also, we stress that managers need to be wholly committed to and personally involved in safety activities, thereby conveying the importance the firm attaches to these issues.