Evaluation of a lime-mediated sewage sludge stabilisation process. Product characterisation and technological validation for its use in the cement industry

This paper describes an industrial process for stabilising sewage sludge (SS) with lime and evaluates the viability of the stabilised product, denominated Neutral, as a raw material for the cement industry. Lime not only stabilised the sludge, raised the temperature of the mix to 80-100 °C, furthering water evaporation, portlandite formation and the partial oxidation of the organic matter present in the sludge.Process mass and energy balances were determined. Neutral, a white powder consisting of portlandite (49.8%), calcite (16.6%), inorganic oxides (13.4%) and organic matter and moisture (20.2%), proved to be technologically apt for inclusion as a component in cement raw mixes. In this study, it was used instead of limestone in raw mixes clinkerised at 1400, 1450 and 1500 °C. These raw meals exhibited greater reactivity at high temperatures than the limestone product and their calcination at 1500 °C yielded clinker containing over 75% calcium silicates, the key phases in Portland clinker. Finally, the two types of raw meal (Neutral and limestone) were observed to exhibit similar mineralogy and crystal size and distribution.     

Inhibition equivalency factors for microcystin variants in recombinant and wild-type protein phosphatase 1 and 2A assays

In this work, protein phosphatase inhibition assays (PPIAs) have been used to evaluate the performance of recombinant PP1 and recombinant and wild-type PP2As. The enzymes have been compared using microcystins-LR (MC-LR) as a model cyanotoxin. Whereas PP2A_Rec provides a limit of detection (LOD) of 3.1 μg/L, PP1_Rec and PP2A_Wild provide LODs of 0.6 and 0.5 μg/L, respectively, lower than the guideline value proposed by the World Health Organization (1 μg/L). The inhibitory potencies of seven MC variants (-LR, -RR, -dmLR, -YR, -LY, -LW and -LF) have been evaluated, resulting on 50 % inhibition coefficient (IC₅₀) values ranging from 1.4 to 359.3 μg/L depending on the MC variant and the PP. The PPIAs have been applied to the determination of MC equivalent contents in a natural cyanobacterial bloom and an artificially contaminated sample, with multi-MC profiles. The inhibition equivalency factors (IEFs) have been applied to the individual MC quantifications determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis, and the estimated MC-LR equivalent content has been compared to PPIA results. PPIAs have demonstrated to be applicable as MC screening tools for environmental applications and to protect human and animal health.     

Emerging pollutants in sewage, surface and drinking water in Galicia (NW Spain)

A monitoring programme was carried out on wastewater, surface and drinking water on the NW area of Spain during the four seasons of a year period (November 2007-September 2008). This study covered a series of emerging pollutants of different classes, including pharmaceuticals, neutral and acidic organophosphorus flame retardant/plasticizers (OPs), triclosan, phenoxy-herbicides, insect repellents and UV filters. From the total set of 53 compounds, 19 were found in raw wastewater with median concentrations higher than 0.1 μg L⁻¹. Among them, salicylic acid, ibuprofen and the UV filter benzophenone-4 (BP-4) were the most concentrated, exceeding the 1 μg L⁻¹ median value. Subsequently, 11 of these contaminants are not efficiently enough removed in the small WWTPs tested and their median concentrations in effluents still surpassed the 0.1 μg L⁻¹, so that they can spread through surface water. These chemicals are the pharmaceuticals naproxen, diclofenac and atenolol; the OPs tri(2-chloroethyl) phosphate (TCEP), tri(chloropropyl) phosphate (TCPP), tri-n-butyl phosphate (TnBP), diphenyl phosphate (DPhP) and diethylhexyl phosphate (DEHP); and the sulphonate UV filters BP-4 and 2-phenylbenzimidazole-5-sulphonic acid (PBSA). These OPs were then the dominant emerging pollutants occurring in surface and drinking water, where they are detected in the 20-200 ng L⁻¹ range. Pharmaceuticals and UV filters are typically below the 10 ng L⁻¹ level. Finally, herbicides were only detected in the last sampling campaign under the 100 ng L⁻¹ drinking water European Union limit.     

Environmental pesticide distribution in horticultural and floricultural periurban production units

The environmental pesticide distribution on non-target systems (soil, drift and agricultural plastics) during the application step at small periurban production units, was studied in open field and greenhouses, for different crops (tomato, lettuce, broccoli, strawberry and flowers) using different pesticides (endosulfan, procymidone, chlorothalonil, chlorpyrifos and deltamethrin). In all cases, soil was the most exposed non-target system. For greenhouses, a general pesticide distribution was found of approximately 2/3 for crop, 1/4 for soil and 1/20 for plastic, of the total amount applied. In horticultural open fields, although the distribution was very dependent on the crop size and type, soil was also the most exposed non-target subsystem. Pesticide drift seems not to be significant in these production units, whilst pesticide accumulation on agricultural plastics reached up to 45% of the total applied, for polyethylene mulching in strawberry fields.     

Heterogeneous photocatalytic oxidation of cyprodinil and fludioxonil in leaching water under solar irradiation

The efficiency of ZnO and TiO₂ suspensions in the photocatalytic degradation of two fungicides (cyprodinil and fludioxonil) in leaching water was investigated. The experiments were carried out at pilot plant scale using compound parabolic collectors under natural sunlight. The blank experiments for both irradiated compounds solutions showed that both oxides strongly enhanced the removal of the fungicides. The addition of an oxidant (Na₂S₂O₈) to the ZnO or TiO₂ increased the rate of photooxidation. The degradation of cyprodinil and fludioxonil followed first order kinetics according to the Langmuir-Hinshelwood model. Complete degradation of both fungicides was achieved within 4 h (t_30W = 18 min) when treated with illuminated ZnO. The disappearance time (DT₇₅), when referred to the normalized illumination time (t_30W), was lower than 40 and 550 min (t_30W = 2 and 40 min) for both fungicides using ZnO or TiO₂, respectively. ZnO appeared to be more effective in cyprodinil and fludioxonil oxidation than TiO₂ probably due to its nonstoichiometry.     

In vitro biological effects of airborne PM₂.₅ and PM₁₀ from a semi-desert city on the Mexico-US border

Compelling evidence indicates that exposure to urban airborne particulate matter (PM) affects health. However, how PM components interact with PM-size to cause adverse health effects needs elucidation, especially when considering soil and anthropogenic sources. We studied PM from Mexicali, Mexico, where soil particles contribute importantly to air pollution, expecting to differentiate in vitro effects related to PM-size and composition. PM samples with mean aerodynamic diameters ≤2.5μm (PM(2.5)) and ≤10μm (PM(10)) were collected in Mexicali (October 2005-March 2006) from a semi-urban (expected larger participation of soil sources) and an urban (predominately combustion sources) site. Samples were pooled by site and size, analyzed for elemental composition (particle-induced X-ray emission) and tested in vitro for: induction of human erythrocytes membrane disruption (hemolysis) (colorimetrically); inhibition of cell proliferation (ICP) (crystal violet) and TNFα/IL-6 secretion (ELISA) using J774.A1 murine monocytic cells; and DNA degradation using Balb/c3T3 cell naked DNA (electrophoretically). Results of PM elemental composition principal component analysis were used in associating cellular effects. Sixteen elements identified in PM grouped in two principal components: Component(1) (C(1)): Mg, Al, Si, P, Cl, K, Ca, Ti, V, Cr, Fe, and Component(2) (C(2)): Cu, Zn. Hemolysis was predominately induced by semi-urban-PM(10) (p<0.05) and was associated with urban-PM(10)C(1) (r=0.62, p=0.003). Major ICP resulted with semi-urban PM(2.5) (p<0.05). TNFα was mainly induced by urban samples regardless of size (p<0.05) and associated with urban-PM(2.5)C(2) (r=0.48, p=0.02). Both PM(10) samples induced highest DNA degradation (p<0.05), regardless of location. We conclude that PM-size and PM-related soil or anthropogenic elements trigger specific biological-response patterns.     

Global DNA methylation in earthworms: a candidate biomarker of epigenetic risks related to the presence of metals/metalloids in terrestrial environments

In this work, possible relationships between global DNA methylation and metal/metalloid concentrations in earthworms have been explored. Direct correlation was observed between soil and tissue As, Se, Sb, Zn, Cu, Mn, Ag, Co, Hg, Pb (p < 0.05). Speciation results obtained for As and Hg hint at the capability of earthworms for conversion of inorganic element forms present in soil to methylated species. Inverse correlation was observed between the percentage of methylated DNA cytosines and total tissue As, As + Hg, As + Hg + Se + Sb (β = −0.8456, p = 0.071; β = −0.9406, p = 0.017; β = −0.9526, p = 0.012 respectively), as well as inorganic As + Hg (β = −0.8807, p = 0.049). It was concluded that earthworms would be particularly helpful as bioindicators of elements undergoing in vivo methylation and might also be used to assess the related risk of epigenetic changes in DNA methylation.     

Cellulose Fiber Isolation and Characterization from Sweet Blue Lupin Hull and Canola Straw

In this study, cellulose fibers were removed from crop by-products using a combination of sodium hydroxide treatment followed by acidified sodium chlorite treatment. The objective was to obtain high recovery of cellulose by optimizing treatment conditions with sodium hydroxide (5–20%, 25–75 °C and 2–10 h) followed by acidified sodium chlorite (1.7%, 75 °C for 2–6 h) to remove maximum lignin and hemicellulose, as well as to investigate the effect of lignin content of the starting materials on the treatment efficiency. Samples were characterized for their chemical composition, crystallinity, thermal behavior and morphology to evaluate the effects of treatments on the fibers’ structure. The optimum sodium hydroxide treatment conditions for maximum cellulose recovery was at 15% NaOH concentration, 99 °C and 6 h. Subsequent acidified sodium chlorite treatment at 75 °C was found to be effective in removing both hemicellulose and lignin, resulting in higher recovery of cellulose in lupin hull (~?95%) and canola straw (~?93%). The resultant cellulose fibers of both crop by-products had increased crystallinity without changing cellulose I structure (~?68–73%). Improved thermal stabilities were observed with increased onset of degradation temperatures up to 307–318 °C. Morphological investigations validated the effectiveness of treatments, revealing disrupted cell wall matrix and increased surface area due to the removal of non-cellulosics. The results suggest that the optimized combination of sodium hydroxide and acidified sodium chlorite treatments could be effectively used for the isolation of cellulose fibers from sweet blue lupin hull and canola straw, which find a great number of uses in a wide range of industrial applications.     

Impact of biofumigation with solarization on degradation of pesticides and heavy metal accumulation

A greenhouse study was conducted to evaluate the effect of biofumigation (with sheep and chicken manure) combined with solarization on the dissipation of pesticides (pyrifenox, DDT and dieldrin), and on soil metals accumulation. The treatments consisted of a control, and soil disinfestations by biofumigation combined with solarization (B+S) for two, four, five, six consecutive years. B+S enhanced the dissipation of pyrifenox with regard to control treatment. Significant differences were not detected among plots disinfected with B+S for consecutive years. On the other hand, B+S had no effect on the dissipation of DDT and dieldrin, probably due to the resistance of these pesticides to microbial degradation and/or high temperatures. Biofumigation is considered to be an environmentally safe practice, since no accumulation of heavy metals such as Cd, Co, Cu, Cr, Pb, Ni, or Zn was observed after the subsequent application of organic matter through the treatments.     

Behavior, distribution and variability of surface ozone at an arid region in the south of Iberian Peninsula (Seville, Spain)

In order to improve our knowledge of the surface ozone in the south of the Iberian Peninsula, annual, monthly, weekly and daily ozone concentrations have been closely monitored in the Seville metropolitan area highlighting those episodes that exceed the European Ozone Directive. A three-year period (2003-2005) and eight ozone stations were used; five of them located in the city's busiest areas and the rest in adjacent zones ( approximately 25km). In addition, the wind regime was also studied in order to understand the main characteristics of the surface atmospheric dynamics. The lowest ozone concentrations 17-33microgm(-3) took place in January while the highest 57-95microgm(-3) occurred in June. The ozone concentration week-weekend differences from May to September indicate that this phenomenon does not affect the ozone stations analysed. Daily cycles show minimum values between 7:00 and 8:00 UTC and maximum at noon, exceeding 90microgm(-3) during summer months. From March to October the ozone concentrations were above the target value for the protection of human health, especially during the summer months, with values up to 30% over the limit. The information threshold has been exceeded at all ozone stations studied but with greater frequency in the stations far from the city centre. In addition, at these latter stations the alert threshold was also exceeded on six occasions. This study in the city of Seville indicates that the high ozone levels are due to local atmospheric effects, mainly since the ozone air masses may undergo recirculation processes. The ozone is transported to the city from the S-SW, having a major impact in the NE areas.