Calibration of Sharp Cut Impactors for Indoor and Outdoor Particle Sampling

ABSTRACT

A low-flow rate, sharp cut point inertial impaction sampler was developed in 1986 that has been widely used in PM exposure studies in the United States and several other countries. Although sold commercially as the MS&T Area Sampler, this sampler is widely referred to as the Harvard Impactor, since the initial use was at the Harvard School of Public Health. Impactor nozzles for this sampler have been designed and characterized for flows of 4,10, 20, and 23 L/min and cut points of 1, 2, 5, and 10 |im. An improved method for determining the actual collecting efficiency curve was developed and used for the recent impactor calibrations reported here. It consists of placing a multiplet reduction impactor inline just downstream of the vibrating orifice aerosol generator to remove the multiplets, thus allowing only the singlet particle s to penetrate through to the impactor being calibrated.

This paper documents the techniques and results of recent nozzle calibrations for this sampler and compares it with other size-selective inertial impactors. In general, the impactors were found to have sharp cutoff characteristics. Particle interstage losses for all of the impactors were very low, with the exception of the 10-|im cut size 20 L/ min impactor, which had greater losses due to the higher flow rate. All of the cut nozzle laboratory calibrations compare favorably to the U.S. Environmental Protection Agency (EPA) WINS-96 fine particle mass (PM_{2 5}) impactor calibration data.     

Soil climate and decomposer activity in Sub-Saharan Africa estimated from standard weather station data: a simple climate index for soil carbon balance calculations

Soil biological activity was calculated on a daily basis, using standard meteorological data from African weather stations, a simple soil water model, and commonly used assumptions regarding the relations between temperature, soil water content, and biological activity. The activity factor r(e_clim) is calculated from daily soil moisture and temperature, thereby taking the daily interaction between temperature and moisture into account. Annual mean r(e_clim) was normalized to 1 in Central Sweden (clay loam soil, no crop), where the original calibration took place. Since soils vary in water storage capacity and plant cover will affect transpiration, we used this soil under no crop for all sites, thereby only including climate differences. The Swedish r(e_clim) value, 1, corresponds to ca. 50% annual mass loss of, e.g., cereal straw incorporated into the topsoil. African mean annual r(e_clim) values varied between 1.1 at a hot and dry site (Faya, Chad) and 4.7 at a warm and moist site (Brazzaville, Congo). Sites in Kenya ranged between r(e_clim) = 2.1 at high altitude (Matanya) and 4.1 in western Kenya (Ahero). This means that 4.1 times the Swedish C input to soil is necessary to maintain Swedish soil carbon levels in Ahero, if soil type and management are equal. Diagrams showing daily r(e_clim) dynamics are presented for all sites, and differences in within-year dynamics are discussed. A model experiment indicated that a Swedish soil in balance with respect to soil carbon would lose 41% of its soil carbon during 30 y, if moved to Ahero, Kenya. If the soil was in balance in Ahero with respect to soil carbon, and then moved to Sweden, soil carbon mass would increase by 64% in 30 y. The validity of the methodology and results is discussed, and r(e_clim) is compared with other climate indices. A simple method to produce a rough estimate of r(e_clim) is suggested.     

Effects of the parasiticide ivermectin on the cladoceran Daphnia magna and the green alga Pseudokirchneriella subcapitata

Although widely used for the treatment of endo- and ectoparasites in livestock and pets, very few data on chronic effects on aquatic organisms are available for the parasiticide ivermectin. In the present study, toxicity of ivermectin to two freshwater organisms, the cladoceran Daphnia magna and the green alga Pseudokirchneriella subcapitata was investigated. For D. magna, a mean LC(50) 48 h of 5.7 ngl(-1) was derived from 10 acute tests. Chronic toxicity of ivermectin to D. magna was extremely high: with 0.001 and 0.0003 ngl(-1), respectively, nominal LOEC and NOEC based on growth and reproduction were far below the analytical limit of detection for this compound. P. subcapitata was considerably less sensitive to ivermectin than D. magna. For both growth rate and yield, EC(50) was >4,000 microgl(-1), LOEC was 1,250 microgl(-1) and NOEC 391microgl(-1). In view of the high toxicity to D. magna, the use of ivermectin might pose a risk to local aquatic ecosystems. Further studies should be carried out to investigate the effects of ivermectin and its degradation products on pelagic and benthic freshwater invertebrates.     

Simulation and analysis of solute transport in 2D fracture/pipe networks: the SOLFRAC program

The Time Domain Random Walk (TDRW) method has been recently developed by Delay and Bodin [Delay, F. and Bodin, J., 2001. Time domain random walk method to simulate transport by advection-dispersion and matrix diffusion in fracture networks. Geophys. Res. Lett., 28(21): 4051-4054.] and Bodin et al. [Bodin, J., Porel, G. and Delay, F., 2003c. Simulation of solute transport in discrete fracture networks using the time domain random walk method. Earth Planet. Sci. Lett., 6566: 1-8.] for simulating solute transport in discrete fracture networks. It is assumed that the fracture network can reasonably be represented by a network of interconnected one-dimensional pipes (i.e. flow channels). Processes accounted for are: (1) advection and hydrodynamic dispersion in the channels, (2) matrix diffusion, (3) diffusion into stagnant zones within the fracture planes, (4) sorption reactions onto the fracture walls and in the matrix, (5) linear decay, and (6) mass sharing at fracture intersections. The TDRW method is handy and very efficient in terms of computation costs since it allows for the one-step calculation of the particle residence time in each bond of the network. This method has been programmed in C++, and efforts have been made to develop an efficient and user-friendly software, called SOLFRAC. This program is freely downloadable at the URL (labo.univ-poitiers.fr/hydrasa/intranet/telechargement.htm). It calculates solute transport into 2D pipe networks, while considering different types of injections and different concepts of local dispersion within each flow channel. Post-simulation analyses are also available, such as the mean velocity or the macroscopic dispersion at the scale of the entire network. The program may be used to evaluate how a given transport mechanism influences the macroscopic transport behaviour of fracture networks. It may also be used, as is the case, e.g., with analytical solutions, to interpret laboratory or field tracer test experiments performed in single fractures.     

转基因植物和食品保障

为了以可持续方式确保世界食品保障,必须解决许多与安全性、流通及其它因素有关的问题.然而,不应当忘记,生产足够的食品是至关重要的.与食品有关的世界贸易问题(包括涉及生物技术应用的问题)应当成为各国之间和各公司之间不断对话的课题.以共同商定的风险评价程序为基础的、国际和谐的质量和安全性标准,是此类讨论的最合理依据.     

Evaluating multispecies landscape connectivity in a threatened tropical mammal community

Habitat corridors are important tools for maintaining connectivity in increasingly fragmented landscapes, but generally they have been considered in single‐species approaches. Corridors intended to facilitate the movement of multiple species could increase persistence of entire communities, but at the likely cost of being less efficient for any given species than a corridor intended specifically for that species. There have been few tests of the trade‐offs between single‐ and multispecies corridor approaches. We assessed single‐species and multispecies habitat corridors for 5 threatened mammal species in tropical forests of Borneo. We generated maps of the cost of movement across the landscape for each species based on the species’ local abundance as estimated through hierarchical modeling of camera‐trap data with biophysical and anthropogenic covariates. Elevation influenced local abundance of banded civets (Hemigalus derbyanus) and sun bears (Helarctos malayanus). Increased road density was associated with lower local abundance of Sunda clouded leopards (Neofelis diardi) and higher local abundance of sambar deer (Rusa unicolor). Pig‐tailed macaque (Macaca nemestrina) local abundance was lower in recently logged areas. An all‐species‐combined connectivity scenario with least‐cost paths and 1 km buffers generated total movement costs that were 27% and 23% higher for banded civets and clouded leopards, respectively, than the connectivity scenarios for those species individually. A carnivore multispecies connectivity scenario, however, increased movement cost by 2% for banded civets and clouded leopards. Likewise, an herbivore multispecies scenario provided more effective connectivity than the all‐species‐combined scenario for sambar and macaques. We suggest that multispecies habitat connectivity plans be tailored to groups of ecologically similar, disturbance‐sensitive species to maximize their effectiveness. Evaluación de la Conectividad de Terrenos Multiespecie en una Comunidad Tropical de Mamíferos     

Sampling approaches to predict urban street noise levels using fixed and temporary microphones

Requirements for static (prediction of L(den) and diurnal averaged noise pattern) and dynamic (prediction of 15 min and 60 min evolution of L(Aeq) and statistical levels L(A90,)L(A50) and L(A10)) noise level monitoring are investigated in this paper. Noise levels are measured for 72 consecutive days at 5 neighboring streets in an inner-city noise measurement network in Gent, Flanders, Belgium. We present a method to make predictions based on a fixed monitoring station, combined with short-term sampling at temporary stations. It is shown that relying on a fixed station improves the estimation of L(den) at other locations, and allows for the reduction of the number of samples needed and their duration; L(den) is estimated with an error that does not exceed 1.5 dB(A) to 3.4 dB(A) according to the location, for 90% of the 3 × 15 min samples. Also the diurnal averaged noise pattern can be estimated with a good accuracy in this way. It was shown that there is an optimal location for the fixed station which can be found by short-term measurements only. Short-term level predictions were shown to be more difficult; 7 day samples were needed to build models able to estimate the evolution of L(Aeq,60min) with a RMSE ranging between 1.4 dB(A) and 3.7 dB(A). These higher values can be explained by the very pronounced short-term variations appearing in typical streets, which are not correlated between locations. On the other hand, moderately accurate predictions can be achieved, even based on short-term sampling (a 3 × 15 minute sampling duration seems to be sufficient for many of the accuracy goals set related to static and dynamic monitoring). Finally, the method proposed also allows for the prediction of the evolution of statistical indicators.     

Application of a Multi-Objective Optimization Method to Provide Least Cost Alternatives for NPS Pollution Control

Nonpoint source (NPS) pollutants such as phosphorus, nitrogen, sediment, and pesticides are the foremost sources of water contamination in many of the water bodies in the Midwestern agricultural watersheds. This problem is expected to increase in the future with the increasing demand to provide corn as grain or stover for biofuel production. Best management practices (BMPs) have been proven to effectively reduce the NPS pollutant loads from agricultural areas. However, in a watershed with multiple farms and multiple BMPs feasible for implementation, it becomes a daunting task to choose a right combination of BMPs that provide maximum pollution reduction for least implementation costs. Multi-objective algorithms capable of searching from a large number of solutions are required to meet the given watershed management objectives. Genetic algorithms have been the most popular optimization algorithms for the BMP selection and placement. However, previous BMP optimization models did not study pesticide which is very commonly used in corn areas. Also, with corn stover being projected as a viable alternative for biofuel production there might be unintended consequences of the reduced residue in the corn fields on water quality. Therefore, there is a need to study the impact of different levels of residue management in combination with other BMPs at a watershed scale. In this research the following BMPs were selected for placement in the watershed: (a) residue management, (b) filter strips, (c) parallel terraces, (d) contour farming, and (e) tillage. We present a novel method of combing different NPS pollutants into a single objective function, which, along with the net costs, were used as the two objective functions during optimization. In this study we used BMP tool, a database that contains the pollution reduction and cost information of different BMPs under consideration which provides pollutant loads during optimization. The BMP optimization was performed using a NSGA-II based search method. The model was tested for the selection and placement of BMPs in Wildcat Creek Watershed, a corn dominated watershed located in northcentral Indiana, to reduce nitrogen, phosphorus, sediment, and pesticide losses from the watershed. The Pareto optimal fronts (plotted as spider plots) generated between the optimized objective functions can be used to make management decisions to achieve desired water quality goals with minimum BMP implementation and maintenance cost for the watershed. Also these solutions were geographically mapped to show the locations where various BMPs should be implemented. The solutions with larger pollution reduction consisted of buffer filter strips that lead to larger pollution reduction with greater costs compared to other alternatives.