Measurement of transferable chemical residue from nylon carpet using the California roller and a new mega-California roller

Human chemical exposures resulting from transfer of surface deposition on indoor nylon carpets may be estimated by measuring transferable residues (mu g chemical/cm2 carpet). A weighted roller developed at California Department of Food and Agriculture (CDFA) has been extensively used to sample transferable residue for estimates of human exposure in risk characterization. A modified roller has been developed to evaluate the influence of pressure on transferable chemical residue since weight and force (or pressure, kg/m2) may vary person-to-person and activity-to-activity. A 30.5 cm diameter roller was used to apply 60 to 2100 kg/m2 to bracket pressures exerted by humans on a flat nylon-carpeted surface. Measurements of transferable cyfluthrin residues were made after 1, 7, and 21 days. Total Soxhlet extractable cyfluthrin residues were relatively constant during the test period. Residue transferability decreased during the study period. Modest increases in the transferability of surface residues were observed over the broad range of pressures applied by the modified roller.     

Sorption of 1,2,4-trichlorobenzene and tetrachloroethene within an authigenic soil profile: Changes in Koc with soil depth

The sorption of 1,2,4-trichlorobenzene and tetrachloroethene was investigated in a series of well-controlled batch experiments, using authigenic soil materials from a profile extending to 2.5 m below ground surface. Batch experiment techniques were verified by study with both pulverized and unpulverized soil at different times of equilibration, using two widely different soil:water ratios, and at a wide range of aqueous concentration. Sorption isotherms were approximately linear, with sorption distribution coefficients (K_d) found to decrease roughly 100-fold down the soil profile. K_d decreased with depth to an extent greater than could be predicted on the basis of the only 10-fold decrease in natural solid organic matter (SOM) content and despite significantly higher specific surface area in the lower horizons. All base-extractable SOM in these deeper soil horizons was operationally defined as fulvic acid (FA), although there was also a significant fraction that was not extracted by the standard base technique. The lower K_d of the deeper soil horizons is believed to reflect a complex combination of (1) lower SOM content; (2) a more hydrophilic form of SOM; and (3) a more intimate association of the SOM with the mineral fraction, affecting its accessibility, sorptivity, or both. For the deeper horizons, an increase in overall K_d by more than 4-fold was observed on solids treated by either base extraction or H₂O₂ treatment, demonstrating that sorption to remaining soil components could be dramatically increased by fractional SOM removal and/or chemical alteration of the soil. A simple regression model that divides SOM into only two types (shallow and deep SOM) provides a reasonably good explanation of sorption in all seven horizons and suggests an order-of-magnitude variability in K_oc among surface soil and deeper horizons.     

Statistical method for the determination of the ignition energy of dust cloud-experimental validation

Powdery materials such as metallic or polymer powders play a considerable role in many industrial processes. Their use requires the introduction of preventive safeguard to control the plants safety. The mitigation of an explosion hazard, according to the ATEX 137 Directive (1999/92/EU), requires, among other things, the assessment of the dust ignition sensitivity. PRISME laboratory (University of Orléans) has developed an experimental set-up and methodology, using the Langlie test, for the quick determination of the explosion sensitivity of dusts. This method requires only 20 shots and ignition sensitivity is evaluated through the E₅₀ (energy with an ignition probability of 0.5). A Hartmann tube, with a volume of 1.3 l, was designed and built. Many results on the energy ignition thresholds of partially oxidised aluminium were obtained using this experimental device (Baudry, 2007) and compared to literature. E₅₀ evolution is the same as MIE but their respective values are different and MIE is lower than E₅₀ however the link between E₅₀ and MIE has not been elucidated.In this paper, the Langlie method is explained in detail for the determination of the parameters (mean value E₅₀ and standard deviation σ) of the associated statistic law. The ignition probability versus applied energy is firstly measured for Lycopodium in order to validate the method. A comparison between the normal and the lognormal law was achieved and the best fit was obtained with the lognormal law.In a second part, the Langlie test was performed on different dusts such as aluminium, cornstarch, lycopodium, coal, and PA12 in order to determine E₅₀ and σ for each dust. The energies E₀₅ and E₁₀ corresponding respectively to an ignition probability of 0.05 and 0.1 are determined with the lognormal law and compared to MIE find in literature. E₀₅ and E₁₀ values of ignition energy were found to be very close and were in good agreement with MIE in the literature.     

Ethics, Science, and Antimicrobial Resistance

The issue of regularly feeding low levels of antibiotics to farm animals in order to increase productivity is often portrayed as a dilemma. On the one hand, such antibiotic use is depicted as a necessary condition for producing cheap and plentiful food, such that were such use to stop, food prices would rise significantly and our ability to feed people in developing nations would decrease. On the other hand, such antibiotic use seems to breed antibiotic resistance into pathogens affecting human health. Resolving this dilemma, it is alleged, will require great amounts of research into risk/benefit assessment. Contrary to this claim, we will argue that society has all the data it needs to make a reasonable ethical decision, which would be curtailing such use. Such curtailment will not harm consumers significantly, will not harm developing nations' evolving agriculture, and could produce hitherto unnoticed benefits, namely restoring the possibility of a more husbandry-based, sustainable agriculture to replace the high-tech agriculture that has hurt animals, the environment, small farms, and sustainability.     

Risks and benefits of lethal male fighting in the colonial,polygynous thrips Hoplothrips karnyi (Insecta: Thysanoptera)

Summary Males of Hoplothrips karnyi (Hood) (Insecta: Thysanoptera), a colonial fungus-feeding thrips, fight each other in defense of communal egg mass sites, where they mate with females that come to oviposit. Fighting males stab each other with their enlarged, armed forelegs and hit each other with their abdomens. Escalated fights occur between large males of similar size. Fights are often lethal; males that died during observations fought more frequently than other males, were stabbed more often and more severely than other males, and were relatively large, but somewhat smaller than their opponents. Large males tend to win fights and guard egg masses, and they secure about 80% of last matings before ovipositions. Guarding males apparently assess female reproductive condition by putting their forelegs partially around females' abdomens; guarding males, but not nonguarding males, mate preferentially with females that have yet to oviposit. Non-guarding males mate with females away from egg masses, sneak matings at egg masses, and occasionally challenge guarding males. Challenges tend to follow matings by non-guarding males at egg masses. Each of four observed or inferred takeovers was followed by the death of the guarding male that lost. Male fighting strategies are discussed in terms of the consistency of lethal fighting with game theory models. Guardin males appear to pursue a classical hawk strategy of escalate until injured or victorious. This strategy may be advantageous because only large males become guarders, the mating success of guarders greatly exceeds that of non-guarders, and high population viscosity ensures that benefits from killing an opponent accrue directly to gaurders. The occurrence of challenges by large non-guarders implies that fighting ability and resource value asymmetries between males change over time; such changes may result from the energetic costs of guarding, injury to guarding males, or depletion of guarding males' supply of sperm.     

Advances in the Analysis of Air Contaminants Comments

Abstract

Methylcyclopentadienyl manganese tricarbonyl (MMT) is an organometallic compound used as an octane improver in unleaded gasoline. The combustion of MMT leads to the formation of manganese (Mn) oxides, mainly Mn₃O₄. The objective of this study is to assess the variations over time and space of respirable (Mn_R) and total (Mn_T) Mn in the urban atmosphere and to evaluate human exposure by inhalation. Two sampling sites were selected on the island of Montreal based on their local traffic density (municipal botanical garden, C^-= 10,000–15,000 vehicles d^-1; Montreal Waterworks, C⁺= 100,000–130,000 vehicles d^-1). Air samplings were made during the day at stations located 10 m from the road using portable pumps, some of which were equipped with a cyclone. Mn_R and Mn_T and other metals were measured on Teflon filters by neutron activation. Mn exposure doses by inhalation were calculated using Monte–Carlo simulations. Mn_R and Mn_T average concentrations were significantly higher at site C⁺ (Mn_R = 0.024 µg m^-3; Mn_T = 0.050 µg m^-3) than at site C^- (Mn_R= 0.015 µg m^-3; Mn_T= 0.027 µg m^-3). Temporal profiles at sites C⁺ and site C^-were similar, with a coefficient of correlation of 0.24 for Mn_R and 0.26 for Mn_T. Trend analyses (ARIMA) also showed that the period of the week (work days vs. off days) was significantly related to Mn_R and Mn_T variations at both sites. The average exposure dose by inhalation to Mn_R and Mn_T ranged from 0.001 to 0.030 µg kg^-1 day^-1 and 0.001 to 0.05 µg kg^-1 day^-1. Mn_R and Mn_T concentrations reflected a positive relationship with traffic density. However, it remains difficult to attribute these results directly to the combustion of MMT in unleaded gasoline. On average, the Mn_R and Mn_T inhalation doses were 2 to 15 times lower than the reference dose (RfC) proposed by the U.S. Environmental Protection Agency (EPA) for the general population.