Advances in the Analysis of Air Contaminants Comments

Abstract

Methylcyclopentadienyl manganese tricarbonyl (MMT) is an organometallic compound used as an octane improver in unleaded gasoline. The combustion of MMT leads to the formation of manganese (Mn) oxides, mainly Mn₃O₄. The objective of this study is to assess the variations over time and space of respirable (Mn_R) and total (Mn_T) Mn in the urban atmosphere and to evaluate human exposure by inhalation. Two sampling sites were selected on the island of Montreal based on their local traffic density (municipal botanical garden, C^-= 10,000–15,000 vehicles d^-1; Montreal Waterworks, C⁺= 100,000–130,000 vehicles d^-1). Air samplings were made during the day at stations located 10 m from the road using portable pumps, some of which were equipped with a cyclone. Mn_R and Mn_T and other metals were measured on Teflon filters by neutron activation. Mn exposure doses by inhalation were calculated using Monte–Carlo simulations. Mn_R and Mn_T average concentrations were significantly higher at site C⁺ (Mn_R = 0.024 µg m^-3; Mn_T = 0.050 µg m^-3) than at site C^- (Mn_R= 0.015 µg m^-3; Mn_T= 0.027 µg m^-3). Temporal profiles at sites C⁺ and site C^-were similar, with a coefficient of correlation of 0.24 for Mn_R and 0.26 for Mn_T. Trend analyses (ARIMA) also showed that the period of the week (work days vs. off days) was significantly related to Mn_R and Mn_T variations at both sites. The average exposure dose by inhalation to Mn_R and Mn_T ranged from 0.001 to 0.030 µg kg^-1 day^-1 and 0.001 to 0.05 µg kg^-1 day^-1. Mn_R and Mn_T concentrations reflected a positive relationship with traffic density. However, it remains difficult to attribute these results directly to the combustion of MMT in unleaded gasoline. On average, the Mn_R and Mn_T inhalation doses were 2 to 15 times lower than the reference dose (RfC) proposed by the U.S. Environmental Protection Agency (EPA) for the general population.     

Cerebro-costo-mandibular syndrome in a father and a female fetus: early prenatal ultrasonographic diagnosis and autosomal dominant transmission

Ultrasonography in a female fetus revealed cystic cervical hygroma, severe micrognathia, and vertebral and upper limb anomalies suggestive of cerebro-costo-mandibular syndrome (CCMS) which was diagnosed ultrasonographically at 16 weeks' gestation. The father is affected and presents with a Pierre Robin sequence, short stature and typical costovertebral anomalies. CCMS is a rare and severe disorder. The high frequency of sporadic cases, vertical transmission, and the excess of sibs affected via horizontal transmission suggest dominant autosomal mutation with possible germinal mosaicism. The vertical familial case detailed in the present report is a reminder of the high risk when one parent or one sibling is affected and the extreme variability of phenotype and costal ossification. Early prenatal ultrasound diagnosis is possible in a severely affected fetus. Copyright © 2001 John Wiley & Sons, Ltd.     

Low bone density and renal dysfunction following environmental cadmium exposure in China

This paper presents the main findings of a study on health effects of environmental cadmium pollution in China, performed in 1998, i.e. approximately 25 years after the first warnings of such effects were published in Ambio. Forearm bone mineral density (BMD) and renal dysfunction were assessed in population groups exposed to cadmium via rice. Decreased BMD was found in postmenopausal women with elevated urinary cadmium (CdU) or cadmium in blood (CdB) and among men with elevated CdB. Also, clear and statistically significant dose-effect and dose-response relationships were found between CdB or CdU and renal dysfunction (increased excretion of retinol-binding protein). This is the first report of bone effects among Cd-exposed population groups in Asia outside Japan. The report is also of interest since it demonstrates that bone effects, a comparatively severe adverse health effect of Cd, in combination with renal dysfunction, still occurs in environmentally exposed population groups in Asia. Recent reports on bone effects in Cd-exposed population groups in Europe are discussed.     

Formation and stability of polychlorinated biphenyl Pickering emulsions

An emulsion stabilized by colloidal suspensions of finely divided solids is known as a Pickering emulsion. The potential for polychlorinated biphenyls (PCBs) to form Pickering emulsions ex situ when in contact with powdered solids, such as clays and metal oxides, is investigated here. Bentonite, iron oxide and magnesium oxide dispersions proved to be robust Pickering emulsion stabilizers, whereas manganese oxide dispersions were not. Batch experiments revealed that emulsions can be formed using a moderately low energy input and can be stabilized with solid concentrations as low as 0.5 wt.%. For the base conditions (volumetric oil fraction (phi(oil))=30 vol.%; solid concentration (chi)=2 wt.%), the formed emulsions were indefinitely stable and the initial average droplet diameters varied from 80 to 258 mum, depending on the solid used in the colloidal dispersion. The average droplet size varied at early time, but for most conditions stabilized to a steady-state value 1 week after preparation. The effect of Ostwald ripening was limited. At greater than 0.5 wt.% concentration, the efficiency of the solid dispersion as a stabilizer was dependant on the volumetric oil fraction but not on the solid concentration. Generally, systems with volumetric oil fractions outside of the 20-70 vol.% range were unstable. The emulsions' droplet stability, average droplet size and size distribution were observed to vary as a function of the amount of energy provided to the system, the volumetric oil fraction, and the concentration of the solid in the aqueous dispersion. It is hypothesized that drilling through fractured rock in the immediate vicinity of dense, non-aqueous phase liquid (DNAPL) PCBs may provide both the energy and solid material necessary to form Pickering emulsions.     

Ecological interpretation of metal contents and contaminant source characterisation of sediments from a megatidal estuary

Sediments and the associated biota constitute an important compartment in the biogeochemical cycle of trace metals in soft substrate megatidal estuaries. The relationship between physicochemical, ecological properties, metal concentrations determined in megatidal estuary sediments from the French coast of the English Channel, the Baie des Veys and the macrobenthic organisms, are analysed, interpreted and reported. Total concentrations of zinc, cadmium, lead and copper were measured in mudflats and saltmarsh sediments using Differential Pulse Voltammetry. Sediment characteristics were obtained by measurement of particle size, water content, total organic carbon and carbonate content, using AFNOR standards. A semi-quantitative scale was used for assessing the density of the macrobenthic flora and fauna at each sampling site. Analysis of data obtained from this study showed a correlation between the concentrations of monitored trace metals and species of the macrobenthic fauna. The results of this study show that the physico-chemical characteristics of the sediments affect the retention of metals in the sediment and this in turn affects the biota.     

Water toxicity monitoring using Vibrio fischeri: a method free of interferences from colour and turbidity

In this paper the kinetic method for the determination of toxicity using Vibrio fischeri is described and suggested as a potential method for the continuous screening of wastewater toxicity. The kinetic method was demonstrated to be free from interferences due to colour and turbidity normally observed when testing wastewater samples with this organism. This is of great importance for the application of the method to remote toxicity screening of wastewaters. The effect of colour, investigated using 50 ppm Zn(2+) solutions containing the food-dye tropaeolin O, and the effect of turbidity, investigated using 50 ppm Zn(2+) solutions containing white optically reflective and coloured optically absorbing polystyrene beads, is reported. It was also found that the design of the light detection system of the instrument ensures efficient collection of the light scattered by particles in the sample, which enables a greater range of turbid samples to be tested. In addition the natural light decay was found to be negligible during the duration of a 10 min test and thus one channel would be enough to carry out the tests. This would mean halving the quantity of bacterial reagent used and reducing the cost of the tests.