Initial Changes in Refilled Lysimeters Built with Metal Polluted Topsoil and Acidic or Calcareous Subsoils as Indicated by Changes in Drainage Water Composition

Soil translocation for recultivation of soil removed from construction sites and for the preparation of refilled lysimeters inevitably involves disturbance of soil structure, and, if intermediate storage is included, also drying and rewetting of the soil. We report on an experiment with model forest ecosystems, where uncontaminated forest subsoils were covered with non-contaminated or freshly heavy metal (mainly Zn and Cu) contaminated topsoil in large lysimeters. Monitoring of the chemical composition of the drainage water revealed two distinct soil conditioning phases. During an initial phase of about a year strongly elevated nitrate and sulfate concentrations occurred that were attributed to a mineralisation flush caused by the increased accessability of mineralisable nitrogen and sulfur in destroyed aggregates. These effects were significantly larger in lysimeters with calcareous subsoil than in those with acidic subsoil. The second phase was characterised by a gradual decrease in dissolved organic carbon and sulfate concentrations, in particular in the acidic subsoil. This decrease may be attributed to the depletion of pools made accessible during aggregate destruction or the formation of new aggregates. These chemical changes had only little effects on the concentrations of copper and zinc in the drainage water. Based on our results, it can be concluded that large refilled lysimeters can be used for many purposes without risk of compromised results, if a conditioning phase of about 1 year with sufficiently moist soil conditions is respected. Nevertheless, gradual changes in soil chemical characteristics still occur after this initial phase. Implications for the recultivation of sites using relocated soils are discussed.     

Biomonitoring zur wirkungsbezogenen Ermittlung der Schadstoffbelastung in terrestrischen Ökosystemen

Biomonitoring programmes provide relevant information, which may supplement ambient air pollution monitoring or modelling around emission sources. As a prerequisite, assessment scales for biomonitoring data have to be derived based on an objective evaluation of available data, as well as on a scheme of presentation, which is suggestive and easily understandable even for laymen. Based on an evaluation of numerous monitoring programmes, assessment scales for biomonitoring results are derived for plant biomonitoring, which also serve as a basis for the graphical presentation of monitoring results. This study is focussed on bioindicator plants like mosses (passive biomonitoring) and exposed lichens (active biomonitoring), in which 14 metal elements are investigated. As an example, data from a local biomonitoring network around a cement plant were used to demonstrate the use of the assessment scales derived and the presentation scheme developed. Data sets from about 15 moss and 24 lichen biomonitoring programmes, comprising more than 1000 specimens, were sorted by their pollutant characteristics in order to form the database. Data on the metal contents of species demonstrating similar values with respect to growth characteristics and habit, and representing background or low pollution levels, are aggregated and their statistical distributions are evaluated. Spacing of the assessment scales and their colour designations are derived from the 50-, 75-, 90- and 95-percentile values. Graphical presentation allows a comparison of the absolute values of metal contents and a relative association of measured values. Exemplary results from moss and lichen monitoring around a cement plant are generally below or slightly above the median values at background and low-pollution sites. Metal contents are higher in lichens compared to mosses for 7 elements (Cd, Cu, Hg, Pb, Sb, Sn, Zn), and are lower in lichens only for thallium. The assessment scheme presented is mainly aimed at the practitioner in the field of biomonitoring in order to provide a reliable and sound scale of assessment by comparison on an absolute scale rather than presenting the basis of ecological risk assessment. Differences in metal content of co-located samples of various moss species and possible correction procedures are briefly discussed- as well as the consequences of pooling monitoring data across various moss species for the quality of assessment scales. Further evaluations shall focus on species-specific rather than on pooled databases and will investigate the consequences of the use of correction factors when extrapolating metal data from one monitoring species to another.     

Identification of heavy metal pollutants using multivariate analysis and effects of land uses on their accumulation in urban soils in Beijing, China

In order to evaluate the current state of the environmental quality of soils in Beijing, we investigated contents of 14 metals in Beijing urban soils inside the 5th ring road by even grids sampling. Statistic analyses were conducted to identify possible heavy metal pollutants, as well as the effects of land uses on their accumulation. Our results revealed that the urban soils in Beijing were contaminated by Cd, Pb, Cu, and Zn. Land uses and urbanization ages affected the accumulation of the four heavy metals in soils significantly. Soils in industrial areas have the highest average Cu and Zn contents, while Pb contents in park areas and Cd in agricultural areas are the highest. The accumulations of Pb and Zn in urban soils increase significantly with sampling plots approaching the city center. And Pb, Cd, and Zn contents in soils in traffic areas also tend to increase in the city center. However, residential areas have the lowest contents of all the four heavy metals.     

Physical Modeling of Emissions from Naturally Ventilated Underground Parking Garages

The dispersion of pollutants from naturally ventilated underground parking garages has been studied in a boundary layer wind tunnel. Two idealized model setups have been analysed, one was simulating pollutant dispersion around an isolated rectangular building and one was representing dispersion in a finite array of idealized building blocks. Flow and dispersion close to modelled ground level emission sources was measured. The results illustrate the complexity of the flow around buildings and provide insight in pollutant transport from ground level sources located directly on building surfaces. As a result, areas critical with respect to high pollutant concentrations could be visualized. Particularly, the results show high concentration gradients on the surface of the buildings equipped with modelled emission sources. Inside the boundary layers on the building walls, a significant amount of pollutants is transported to upwind locations on the surface of the building. The paper documents the potential of physical modelling to be used for the simulation and measurement of dispersion close to emission sources and within complex building arrangements.     

Applied waste-free recovery of methanol

In this paper, we present applied methanol recycling technology utilising Chromatographic applications, which has been designed for an academic-size institution. The procedure is combined out of proper recovery technique and the biodegradation method intended for postprocessing residues. Additionally, analytical methods controlling the quality of the process are described in detail in order to enable full transfer of the proposed methodology to the analogous institution. The recovered solvent is of relatively high purity (> 99.92%), containing traces of water and volatile compounds. The spectral purity is sufficient to employ recycled methanol in HPLC applications where low wayelength detection is necessary. Biodegradation of distillation first-cuts and still bottoms is implemented using isolated strains ofMethylobacterium organophilum. During the biodegradation process, a series of carotenoids are biosynthesized, which are of a high commercial value. The proposed application, therefore, offers not only a sustainable, waste-free solution in handling methanol waste, but can also serve as a potential source of value.     

Biological responses of workplace particles and their association with adverse health effects on miners

Epidemiological research has demonstrated the relationship between exposure to quartz dust and an elevated risk of pneumoconiosis and possible elevated risk of cancer. The current study was designed to evaluate the biological responses of workplace particles containing crystalline silica using an in vitro cell test. Respirable particle samples were sampled from four tin mines, where the standardized mortality ratio (SMR) for pneumoconiosis was 51.6 and SMR for lung cancer was 2.2 in dust-exposed miners. Alveolar macrophages (AM) are considered as the target cells for primary dust effects. The samples were then measured at 15, 30, 60 and 120 microg particle per 10(6) AM for cytoxicity with the release of glucuronidase, lactate dehydrogenase, for reactive oxygen damage with H(2)O(2) release, and for ability to induce fibrosis using the secretion of tumor necrosis factor-alpha (TNF-alpha). Pure quartz (DQ12) and corundum were used as controls. The results showed the samples from tin mines caused a higher cytoxicity when compared to corundum, yet lower when compared to quartz. However, reactive oxygen species release (148-177 nmol/3 x 10(5) AM in high concentration of 120 microg/10(6) AM) induced by the samples were significantly higher than that induced by quartz (57 nmol/3 x 10(5) AM) and corundum (62 nmol/3 x 10(5) AM). Furthermore, particle samples induced higher TNF-alpha secretion than corundum, the samples from Limu tin mine induced much higher TNF-alpha levels than that induced by DQ12 quartz. The results from the in vitro tests help elucidate the degree of hazard of dust particles in tin mines. The in vitro reaction patterns of AM also constitute a powerful tool to monitor biological and pathogenic responses of humans following dust particle exposure.     

Ein Moosbiomonitoring zur Ermittlung atmosph?rischer Elementeintr?ge in die Euroregion Nei?e (D, PL, CZ)

Zusammenfassung  Durch ein Moosbiomonitoring sollte die H?he und die Verteilung der atmosph?rischen Deposition von 37 Elementen in der Euroregion Nei?e (ERN) nach den politischen und wirtschaftlichen Ver?nderungen erfasst und mit anderen Regionen verglichen werden. Weiterhin sollten die Akkumulationseigenschaften vonPleurozium schreberi undPolytrichum formosum, den in dieser Studie verwendeten Moosarten, miteinander verglichen werden. Bis Anfang der 90er Jahre war diese Region Teil des “Schwarzen Dreiecks”, das sich durch eine extrem hohe atmosph?rische Staubbelastung auszeichnete. Durch die Schlie?ung zahlreicher Betriebe, der Ausrüstung der Kraftwerke mit Filteranlagen, der abnehmenden Bedeutung der Braunkohle als h?uslicher Energietr?ger ver?nderte sich die Situation drastisch. Die Elementkonzentrationen in den Moosen der ERN lassen sich heute mit denen der alten Bundesl?nder vergleichen. Lediglich für Fe und Ti konnten deutlich h?here Gehalte ermittelt werden. Dies ist auf den h?heren Anteil der Braunkohle als Energietr?ger zurückzuführen. In der Region um Katowice in Oberschlesien konnten für einige Elemente mehr als 10 fach h?here Gehalte in den Moosen als in der ERN ermittelt werden. Das Oberschlesische Industrierevier weist eine derart hobe atmosph?rische Belastungen auf, dass hier ein dringender Handlungsbedarf besteht. Online-First: 21. Juni 2000     

Umweltwissenschaften — Quo vaditis?

Ohne Zusammenfassung Univ. Prof. Dr. GerdPeschke (†22. August 2001) gewidmet, der die Geschikke des Internationalen Hochschulinstituts Zittau in seiner Aufbauphase seit 1993 wesentlich mitgepr?gt hat und bis vor kurzem den Lehrstuhl §Umweltsystemwissenschaften’ am IHI Zittau mit Leben füllte. Ihm haben Diskussionen über die Zukunft der Umweltwissenschaften immer viel Freude bereitet. Danke, lieber Freund!     

Untersuchungen zur Bioverfügbarkeit Kfz-emittierter Platingruppenelemente (PGE) für die aquatische Fauna unter besonderer Berücksichtigung von Palladium

The uptake and accumulation of the traffic-related platinum group elements (PGE) Pt, Pd and Rh by the aquatic fauna was investigated. Zebra mussels, eels and barbels were maintained in water containing either road dust or ground catalytic converter material. Following the exposure, samples of fish liver and kidney, as well as the soft tissues of the mussels, were analysed. Our results revealed that all three catalytic noble metals were accumulated by aquatic organisms. The highest bioavailability was found for Pd, followed by Pt and Rh. The concentration factor of Pd forDreissena polymorpha was 5 times higher compared with Pd and only 6 times lower than the essential element Cu. With regard to the increasing emission of Pd the level of this metal has to be monitored very carefully in the environment.