Leitlinien einer Ethik der Gentechnik

A fundamentalistic point of view is for the evaluation of genetic engineering inadequate. Using ethics to evaluate the consequences is not valid for gene transfers across species as a morally relevant criterion but is rather the assessment of toxic, pathogenic, and ecological effects of transgenic organisms. A criterion for human genetics is not the inviolability of the human embryo, but social and human tolerance and the consent of the affected.     

The dissipation,distribution and fate of a branched 14C-nonylphenol isomer in lake water/sediment systems

A single tertiary isomer which is believed to be one of the major branched isomers of the isomeric nonylphenol was synthesized for use in investigations on its metabolism and estrogenicity in aquatic organisms. The physico-chemical properties of the isomer were determined to enable the prediction of its behaviour in aquatic environments. From laboratory investigations on its dissipation and distribution in lake water, which are reported in this paper, it was found that it had a half-life of dissipation of 38.1 days and 20.1 days in an open lake water and in an open lake water/ sediment system, respectively, and to be rapidly partitioned in to sediment giving a high concentration factor of 1.76 after 28 days with an initial dose concentration of 2.52 ppm. The main dissipation route was found to occur through volatilization and co-distillation. The isomer was, however, found to be resistant to biodegradation in both the lake water and sediment, showing only a slight 9% loss (after 56 days) and 4.2% loss (after 28 days), of the 14C-residues in lake water and lake water/sediment systems, respectively, by microbial activity. Transformation to other more polar metabolites possibly by hydroxylation was also found to be minimal in both lake water and sediment samples after 14 days by HPLC analysis. After 7 days, only 2.25 and 7.4% transformation to a more polar metabolite was detected in lake water and sediment samples, respectively.     

REST-Rossendorf expert system for surface and sorption thermodynamics

This paper presents a digitized version of a thermodynamic sorption database, implemented as a relational database with MS Access. It is mineral-specific and can therefore be used for additive models of complex solid phases such as rocks or soils. An integrated user interface helps users to access selected mineral and sorption data, to extract internally consistent data sets for sorption modeling, and to export them in formats suitable for other modeling software. Data records comprise mineral properties, specific surface area values, surface binding sites' characteristics, sorption ligand information, and surface complexation reactions. An extensive bibliography is included, providing links not only to the above listed data, but also to background information concerning surface complexation model theories, evidence for surface species, and sorption experimental techniques.     

Microbial reduction of sulfate injected to gas condensate plumes in cold groundwater

Despite a rapid expansion over the past decade in the reliance on intrinsic bioremediation to remediate petroleum hydrocarbon plumes in groundwater, significant research gaps remain. Although it has been demonstrated that bacterial sulfate reduction can be a key electron accepting process in many petroleum plumes, little is known about the rate of this reduction process in plumes derived from crude oil and gas condensates at cold-climate sites (mean temperature <10 degrees C), and in complex hydrogeological settings such as silt/clay aquitards. In this field study, sulfate was injected into groundwater contaminated by gas condensate plumes at two petroleum sites in Alberta, Canada to enhance in-situ bioremediation. In both cases the groundwater near the water table had low temperature (6-9 degrees C). Monitoring data had provided strong evidence that bacterial sulfate reduction was a key terminal electron accepting process (TEAP) in the natural attenuation of dissolved hydrocarbons at these sites. At each site, water with approximately 2000 mg/L sulfate and a bromide tracer was injected into a low-sulfate zone within a condensate-contaminant plume. Monitoring data collected over several months yielded conservative estimates for sulfate reduction rates based on zero-order kinetics (4-6 mg/L per day) or first-order kinetics (0.003 and 0.01 day(-1)). These results favor the applicability of in-situ bioremediation techniques in this region, under natural conditions or with enhancement via sulfate injection.     

Die rolle der umweltprobenbank in der Umweltüberwachung am beispiel von chlorierten kohlenwasserstoffen in ausgewählten matrizes

For precautinary environmental protection the Environmental Specimen Bank (ESB) has been successfully established as a permanent environmental surveillance tool in Germany. The presented monitoring results on chlorinated hydrocarbons (CHC) show very clearly the effects of political decisions and can be used for the identification of pollutant sources. The CHC burden of breams (Abramis brama) from five German rivers (Elbe, Rhein, Saar, Mulde, Saale) gives an current overview of the pollution situation of different limnic ecosystems in Germany. A calculation model about the distribution of organic pollutants between different tissues offers the possibility to predict concentrations in liver and muscle of breams. Legislative emission restrictions have led to a significant decrease of dioxin levels in herring gull (Larus argentatus) eggs between 1988–1996.     

Characterization of municipal solid waste combustion in a grate furnace

The objective of this paper is to evaluate the combustion process of municipal solid waste combustion in a grate furnace both experimentally and numerically by using data of a reference experiment with over-stoichiometric primary air supply. Measurements were carried out inside the combustion chamber of a pilot plant by monitoring temperatures and sampling gaseous combustion products along the bed surface. The data were assessed using elemental and energy balances. Experimental data of the axial temperature profiles of the flue gas, the fuel bed and the grate bars, as well as local gas flows and the flue gas composition measured above the fuel bed along the grate were used to describe the conversion process, including drying and carbon burnout. These data served as input to model the thermo- and fluid dynamic processes of the gas phase above the bed inside the combustion chamber. For this purpose the commercial code FLUENT was employed to carry out the simulations. Thus, the turbulent temperature, flow and species distributions in the combustion chamber of the pilot waste incinerator TAMARA were predicted. The results of the FLUENT modeling showed that under the prevailing conditions the flue gas burnout is almost completed before entering the first flue due to high temperatures, effective mixing and sufficient residence times of the flue gas inside the combustion chamber. This agrees well with the experimental results inside the first flue. On the basis of the above mentioned results, design and parametric studies can be carried out in a more efficient way by saving cost and time.     

Assessing the impact of biological control of Plutella xylostella through the application of Lotka–Volterra model

The Lotka–Volterra model was applied to the population densities of diamondback moth (DBM), Plutella xylostella (L.) and its exotic larval parasitoid Diadegma semiclausum (Hellen) data that was collected earlier by icipe's DBM biological control team. The collections were done for 15 months before the release and 36 months after release of the parasitoid in two areas; in Werugha, Coast Province of Kenya and Tharuni, Central Province of Kenya, respectively. For each area in pre- and post-release periods, we estimated Lotka–Volterra model parameters from the minimization of the loss function between the theoretical and experimental time-series datasets following the Nelder-Mead multidimensional method. The model estimated a reduction in the value of the steady state of DBM population from 4.86 to 2.17 in Werugha and from 6.11 to 3.76 and 3.45 (with and without exclusion of the time before D. semiclausum recovery) in Tharuni when transiting from the pre- and post-release periods, respectively. This change was a consequence of the newly introduced parasitoid, in the areas. The study presented a successful and detailed technique for non-linear model parameters restoration which was demonstrated by the correct mimicking of empirical datasets from the classical biological control with D. semiclausum, in different areas of Kenya. The applied model has measured the parasitoids impact on the DBM biological control through a quantitative estimate of the effectiveness of the newly introduced species D. semiclausum. These equations may therefore be used as tool for decision making in the implementation for such pests’ management system strategy.     

Evaluation of discrete host–parasitoid models for diamondback moth and Diadegma semiclausum field time population density series

The performance of discrete mathematical models to describe the population dynamics of diamondback moth (DBM) (Plutella xylostella L.) and its parasitoid Diadegma semiclausum was investigated. The parameter values for several well-known models (Nicholson–Bailey, Hassell and Varley, Beddington, Free and Lawton, May, Holling type 2, 3 and Getz and Mills functional responses) were estimated. The models were tested on 20 consecutive sets of time series data collected at 14 days interval for pest and parasitoid populations obtained from a highland cabbage growing area in eastern Kenya. Model parameters were estimated from minimized squared difference between the numerical solution of the model equations and the empirical data using Powell's method. Maximum calculated DBM growth rates varied between 0.02 and 0.07. The carrying capacity determined at 16.5 DBM/plant by the Beddington et al. model was within the range of field data. However, all the estimated parameter values relating to the parasitoid, including the instantaneous searching rate (0.07–0.28), per capita searching efficiency (0.20–0.27), search time (5.20–5.33), handling time (0.77–0.90), and parasitism aggregation index (0.33), were well outside the range encountered empirically. All models evaluated for DBM under Durbin–Watson criteria, except the May model, were not autocorrelated with respect to residuals. In contrast, the criteria applied to the parasitoid residuals showed strong autocorrelations. Thus, these models failed to estimate parasitoid dynamics. We conclude that the interactions of the DBM with its parasitoid cannot be explained by any of the models tested. Two factors may be associated with this failure. First, the parasitoid in this integrated biological control system may not be playing a major role in regulating DBM population. Second, and perhaps more likely, poor correlations reflect gross inadequacies in the theoretical assumptions that underlie the existing models.