Overcoming growing water scarcity: Exploring potential improvements in water productivity in India

Improvements in water productivity (WP) are often suggested as one of the alternative strategies for overcoming growing water scarcity in India. This paper explores the potential improvements in WP of food grains at district level, which currently varies between 0.11 and 1.01 kilogram per cubic metre (kg/m³), in the 403 districts that account for 98% of the total production of food grains. The paper first finds the maximum yield function conditional on consumptive water use (CWU) and then explores the potential improvements in WP by: (a) bridging the gap between actual and maximum yield while keeping CWU constant; and (b) changing the maximum yield by adjusting the CWU using supplementary or deficit irrigation. Deficit irrigation in some areas may decrease yield but can increase production if land availability is not a constraint. A large potential exists for bridging the yield gap in irrigated areas with CWU between 300 and 475 mm. Of the 222 districts that fall under this category, a 50% reduction in yield gap alone could increase production by 100 million tonnes (Mt) without increasing CWU. Supplementary irrigation can increase yield and WP in rain‐fed and irrigated areas of 266 and 16 districts with CWU is below 300 mm. Deficit irrigation in irrigated areas of 185 districts with CWU above 475 mm could increase yield, WP and production. Decreasing CWU in irrigated areas with CWU between 425 and 475 mm reduces yield slightly, but if availability of land is not a constraint then the benefits due to water saving and production increases could exceed the cost.     

Epibrassinolide ameliorates Cr (VI) stress via influencing the levels of indole-3-acetic acid, abscisic acid, polyamines and antioxidant system of radish seedlings

The present investigation determined the effects of epibrassinolide (EBL) on the levels of indole-3-acetic acid (IAA), abscisic acid (ABA), and polyamine (PA) and antioxidant potential of 7-d old Raphanus sativus L. cv. ‘Pusa chetki’ seedlings grown under Cr (VI) metal stress. Reduced titers of free (0.767 μg g⁻¹ FW) and bound (0.545 μg g⁻¹ FW) IAA in Cr (VI) stressed seedlings were observed over untreated control. Supplementations of EBL to Cr (VI) stressed seedlings were able to enhance both free (2.14-5.68 μg g⁻¹ FW) and bound IAA (2.45-7.78 μg g⁻¹ FW) concentrations in comparison to Cr (VI) metal treatment alone. Significant rise in free (13.49 μg g⁻¹ FW) and bound (12.17 μg g⁻¹ FW) ABA contents were noticed for Cr (VI) stressed seedlings when compared to untreated control. No significant increase in ABA contents were recorded for Cr (VI) stressed seedlings upon supplementation with EBL over Cr (VI) treatment alone. A significant increase in Put (18.40 μg g⁻¹ FW) and Cad (9.08 μg g⁻¹ FW) contents were found for 10⁻⁹ M EBL plus Cr (VI) metal treatments when compared to Cr (VI) treatment alone. Spermidine (Spd) contents were found to decline significantly for EBL treatment alone or when supplemented with Cr (VI) treatments over untreated controls and Cr (VI) treatment alone. Antioxidant levels were found to enhance, with glutathione (57.98 mg g⁻¹ FW), proline (4.97 mg g⁻¹ FW), glycinebetaine (39.01 μmol mL⁻¹), ascorbic acid (3.17 mg g⁻¹ FW) and phytochelatins (65.69 μmol g⁻¹ FW) contents noted for EBL supplemented to Cr (VI) metal solution over Cr (VI) treatment alone. Reduced activities of guaiacol peroxidase (0.391 U mg⁻¹ protein) and catalase (0.221 U mg⁻¹ protein) and enhanced activities of glutathione reductase (7.14 U mg⁻¹ protein), superoxide dismutase (15.20 U mg⁻¹ protein) and ascorbate peroxidase (4.31 U mg⁻¹ protein) were observed in seedlings treated with EBL plus Cr (VI) over Cr metal treatment alone. Reduced MDA (2.55 μmol g⁻¹ FW) and H₂O₂ (33.24 μmol g⁻¹ FW) contents were recorded for 10⁻⁹ M EBL supplemented to Cr (VI) stress over Cr (VI) treatment alone. Enhancement in free radical scavenging potential as indicated by higher values of 1,1-diphenylpicrylhydrazyl, deoxyribose and reducing power activity assays, and increased levels of phenols and soluble sugars also showed significant influence of EBL in alleviating Cr (VI) stress in radish seedlings.     

Environmental impact assessment of a ceramic tile supply chain – a case study

The beginning of the twenty-first century saw a surge in the growth of construction industry, particularly the housing sector in India. This led to the growing demand of ceramic tiles. This growth is responsible for large-scale consumption of natural resources and generation of solid waste. The objective of this paper is to assess the environmental impact of vitrified ceramic floor tile supply chain by performing life cycle assessment (LCA) following international standards of ISO 14040 series guidelines. The impact has been determined by conducting a LCA using Umberto NXT software (eco-invent 3.0 database) with ReCiPe endpoint and midpoint methods. It has been found that the manufacturing stage of supply chain is generating highest impact on environment in all the categories. Impact analysis of different input resources/material shows that red oxide used in glaze preparation, electricity in manufacturing, packaging material, distribution by trucks, installation of tiles using concrete and disposal of packaging material are responsible for most of the environmental impact. This study will offer the essential quantitative assessment to recognise the phases and materials which are highly responsible for the degradation of environment so that appropriate interventions by the different stakeholders can be planed.     

Chemical characteristics and source apportionment of PM<Subscript>2.5</Subscript> using PCA/APCS,UNMIX, and PMF at an urban site of Delhi,India

The present study investigated the comprehensive chemical composition [organic carbon (OC), elemental carbon (EC), water-soluble inorganic ionic components (WSICs), and major & trace elements] of particulate matter (PM_2.5) and scrutinized their emission sources for urban region of Delhi. The 135 PM_2.5 samples were collected from January 2013 to December 2014 and analyzed for chemical constituents for source apportionment study. The average concentration of PM_2.5 was recorded as 121.9 ± 93.2 μg m^?3 (range 25.1–429.8 μg m^?3), whereas the total concentration of trace elements (Na, Ca, Mg, Al, S, Cl, K, Cr, Si, Ti, As, Br, Pb, Fe, Zn, and Mn) was accounted for ～17% of PM_2.5. Strong seasonal variation was observed in PM_2.5 mass concentration and its chemical composition with maxima during winter and minima during monsoon seasons. The chemical composition of the PM_2.5 was reconstructed using IMPROVE equation, which was observed to be in good agreement with the gravimetric mass. Source apportionment of PM_2.5 was carried out using the following three different receptor models: principal component analysis with absolute principal component scores (PCA/APCS), which identified five major sources; UNMIX which identified four major sources; and positive matrix factorization (PMF), which explored seven major sources. The applied models were able to identify the major sources contributing to the PM_2.5 and re-confirmed that secondary aerosols (SAs), soil/road dust (SD), vehicular emissions (VEs), biomass burning (BB), fossil fuel combustion (FFC), and industrial emission (IE) were dominant contributors to PM_2.5 in Delhi. The influences of local and regional sources were also explored using 5-day backward air mass trajectory analysis, cluster analysis, and potential source contribution function (PSCF). Cluster and PSCF results indicated that local as well as long-transported PM_2.5 from the north-west India and Pakistan were mostly pertinent.     

Assessment of background levels of trace metals in water and soil from a remote region of Himalaya

Selected trace metals were estimated by atomic absorption spectrometry in the water and soil samples collected from the remote region of Himalaya. The soil samples were analysed for soluble and acid extractable fraction of trace metals. In water samples, Ca, Na, Mg and K emerged as dominant contributors, whereas, Ca, Na, K, Mg, Fe and Pb were estimated at comparatively higher levels in the water extract of the soil. In case of acid extract of the soil samples, Ca, K, Fe, Mg, Mn and Na were found at elevated concentrations. Based on mean levels of the metals, following decreasing concentration order was observed in water samples: Ca > Na > Mg > K > Pb > Co > Cu > Zn > Mn > Cr > Fe > Cd > Li, however, in the acid extract of the soil, following order was noted: Ca > K > Fe > Mg > Mn > Na > Pb > Zn > Cr > Li > Cu > Co > Cd. The correlation study revealed appreciably diverse mutual relationships of trace metals in the water and soil samples. The multivariate cluster analyses exhibited divergent apportionment of trace metals in water and soil samples. Among the trace metals, Cd, Pb, Li, Zn, Cr, Cu, Mn and Co exhibited extreme to significant anthropogenic enrichment in the soil samples, while the rest of the metals were mostly contributed by the natural processes.     

Geopolymer concrete with metakaolin for sustainability: a comprehensive review on raw material’s properties,synthesis, performance,and potential application

Environmental Science and Pollution Research - In the last three decades, the gigantic demand for sustainable and environmentally friendly concrete with reduced environmental footprints has...     

Effect of nicotine (plant extract) on sex-ratio of Drosophila melanogaster (Meigen)

Experiments were conducted by using nicotine (plant extract) for its toxic effects on Drosophila melanogaster, LC50 estimated is 2.9552 microl/100 ml. Studies revealed that nicotine affects adult emergence of males and females (sex-ratio) of mutant form (Yellow) of Drosophila melanogaster.     

Temporal signatures of advective versus diffusive radon transport at a geothermal zone in Central Nepal

Temporal variation of radon-222 concentration was studied at the Syabru-Bensi hot springs, located on the Main Central Thrust zone in Central Nepal. This site is characterized by several carbon dioxide discharges having maximum fluxes larger than 10 kg m⁻² d⁻¹. Radon concentration was monitored with autonomous Barasol™ probes between January 2008 and November 2009 in two small natural cavities with high CO₂ concentration and at six locations in the soil: four points having a high flux, and two background reference points. At the reference points, dominated by radon diffusion, radon concentration was stable from January to May, with mean values of 22 ± 6.9 and 37 ± 5.5 kBq m⁻³, but was affected by a large increase, of about a factor of 2 and 1.6, respectively, during the monsoon season from June to September. At the points dominated by CO₂ advection, by contrast, radon concentration showed higher mean values 39.0 ± 2.6 to 78 ± 1.4 kBq m⁻³, remarkably stable throughout the year with small long-term variation, including a possible modulation of period around 6 months. A significant difference between the diffusion dominated reference points and the advection-dominated points also emerged when studying the diurnal S₁ and semi-diurnal S₂ periodic components. At the advection-dominated points, radon concentration did not exhibit S₁ or S₂ components. At the reference points, however, the S₂ component, associated with barometric tide, could be identified during the dry season, but only when the probe was installed at shallow depth. The S₁ component, associated with thermal and possibly barometric diurnal forcing, was systematically observed, especially during monsoon season. The remarkable short-term and long-term temporal stability of the radon concentration at the advection-dominated points, which suggests a strong pressure source at depth, may be an important asset to detect possible temporal variations associated with the seismic cycle.     

Dynamics of pesticide residues in nectar and pollen of mustard (Brassica juncea (L.) Czern.) grown in Himachal Pradesh (India)

Residues dynamics of Endosulfan (525.00 g a.i. ha(-1)), Imidacloprid seed treatment (21 g a.i. kg(-1)), Lambdacyhalothrin (75.00 g a.i. ha(-1)) and Spiromesifen (225.00 g a.i. ha(-1)) in nectar and pollen of mustard, Brassica juncea (L.) Czern. grown in Himachal Pradesh (India) were determined through bioassay (using Drosophila melanogaster Meig. as test organism) and GC (Gas chromatographic) and HPLC (High performance liquid chromatographic) methods. In general chromatographic methods were more sensitive for the determination of above given pesticides compared to bioassay method. Average recoveries in nectar samples varied between 82.85 and 88.90% by bioassay and 91.20 and 93.55% by chromatographic techniques. In pollen samples, recoveries varied between 81.44 and 86.44% by bioassay and 88.50 and 91.30% by chromatographic methods. Imidacloprid residues were neither found in nectar nor in pollen samples at the time of sampling i.e. 50% of flowering. The order of average half life of residues was: Lambdacyhalothrin (12.45 h) < Spiromesifen (19.99 h) < Endosulfan (27.49 h) for nectar and Spiromesifen (9.69 h) < Lambdacyhalothrin (12.44 h) < Endosulfan (17.84 h) for pollen samples. It was found that Imidcloprid seed treatment was practically harmless to honey bees, whereas a waiting period of 5 days must be observed on crops sprayed with these chemicals during blooms to avoid any accidental hazards to honey bees.     

Performance analysis of bioethanol (Water Hyacinth) on diesel engine

The increasing consumption and excessive extraction of conventional fuels is the matter of serious concern. Nowadays, world is looking for alternative sources of fuel which can partially replace conventional fuel dependence. The current investigation intends to provide evaluation of bio-ethanol preparation from Water Hyacinth (WH) and its influence on diesel engine performance under various operating conditions. This study explores the extraction of glucose from WH (Eichhornia crassipes) pretreated with sulfuric acid (H₂SO₄) for production of bio-ethanol. For the production of bio-ethanol different concentrations of H₂SO₄ acid hydrolysate (1%, 2%, 4%, 6%, 8%, and 10%) were prepared which was then followed by fermentation with cellulose fermenting yeasts. From results, it was observed that 4% H₂SO₄ acid hydrolysis produces higher concentrations of ethanol than other concentrations. Bio-ethanol extracted from WH was blended with diesel in different proportions (5%, 10%, 15%, 20%, and 25%) v/v and performance and emissions were experimentally investigated on single cylinder diesel engine under various load conditions. Experimental results show that 5 BED [5% bio-ethanol (WH + 95%diesel v/v) and 10BED (10% bio-ethanol (WH + 90%diesel v/v)] produces higher brake power, brake thermal efficiency and brake mean effective pressure with improved exhaust emission profiles than any other blend.