Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

乌鲁木齐市餐饮业油烟污染的调查及防治初探

通过对乌鲁木齐市20家餐饮业油烟污染的调查分析，结果表明，乌鲁木齐市餐饮业油烟污染严重，并提出了防治措施。     

中国海洋大气监测方案的设想

概述了国内外海洋大气环境监测的基本情况，提出了我国开展海洋大气环境监测的必要性，在我国开展海洋大气环境监测必须解决的几个新课题，并根据国家海洋局《海洋大气监测方案》（讨论稿）提出了我国开展海洋大气监测的设想。     

合成洗涤剂对小鼠诱变性研究

连续５天腹腔注射同一剂量（１／５ＬＤ５０）的合成洗涤剂，取小鼠骨髓细胞测定嗜多染色红细胞的微核率，研究表明，３种合成洗涤剂（加大香洗衣粉，洁牌餐具洗涤剂，恩威高级餐具洗洁精）使小鼠微核率有所增高，但恩威，洁牌餐具洗涤剂与对照无显著性差异。     

Determination of arsenic in grain and soil by hydride nondispersive atomic fluorescence method

Quantity of trace arsenic in grain and soil was determined by hydride nondispersive atomic fluorescence method.Optimum conditions of measurement were selected in the experiment including the pH of the medium, reductive agent, the concentration and flowing velocity of KBH4, rate of carrier gas and atomized temperature. The reference sample of rice C was determined and the linear relationship of the calibration curve was plotted, indicating that the method was highly precise. In the experiment of recovery rate, the method was quite satisfactory.Based on the determination of hundreds of samples, it is proved that atomic fluorescence method is rapid, sensitive and low in interference. It is very efficient on determination of trace arsenic in soils and grains, especially in grains.     

深圳港盐田港区生态环境影响回顾性分析

根据历次盐田港港口建设所进行的生态环境现状调查资料，对盐田港建港至今的生态环境进行分析，得出盐田港所在海域的生态环境质量状况并未因港口的建设和规模扩大而发生明显变化的结论。     

基于AHP-MF模型的用户群节水指标体系研究

从分析影响用户群节水的因素及其构成关系入手,根据专家长期节水工作的经验,利用层次分析法对用户群节水指标进行优选,并提出全面的定量化和定性化的层次结构评价模式和总体评价方法.首先构建用户群节水的层次分析结构模型及判断矩阵,应用Matlab6.5计算出各判断矩阵的最大特征值及其特征向量,并检验判断矩阵的一致性,继而确定出各指标的权重;其次,应用Fuzzy统计的方法对陕西2006年度高校用户群的节水情况进行评价,并为节水工作提供建设性意见.     

城市生活垃圾理化性质的动态特性分析

对太原市城市生活垃圾的组成、化学元素及重金属等进行了1年(每月2次)共24次的分析。结果表明,太原市生活垃圾的组成在焚烧过程中,能产生低位热值(Q低)的有机物占(44.28±2.24)％,不产生低位热值的无机物占(13.94±2.01)％,混合物(破碎的动植物碎片及粘附在其上面的灰、土、砂)占(43.36±8.67)％。垃圾中可燃物比例较高,水分含量较低,有利于焚烧和热解,低位热值(Q低)平均值为(5590.8±1252.3)kJ/kg,但低位热值随季节变化较大。垃圾中化学元素硫(S)、氯(Cl)、氮(N)、氢(H)、碳(C)、氧(O)的年平均值分别为(0.20±0.13)％、(0.48±0.11)％、(0.87±0.18)％、(2.56±0.76)％、(30.78±4.06)％、(16.42±5.17)％,与其他城市相比,S、N、Cl的含量较高。垃圾中的重金属铅(Pb)、镉(Cd)的年平均值分别为41.94mg/Kg和1.806mg/kg;汞(Hg)含量变化较大。焚烧后的灰渣中,Pb部分挥发,Cd得到富集,但几乎无Hg检出。     

长江中下游火山-侵入杂岩研究中值得探讨的几个问题(一)

长江中下游燕山期中酸性-酸性火山-侵入杂岩大家公认为具有偏碱性到碱性特点，但对富碱原因即碱质来石源则存在不同意见，大多数人认为壳幔亮混源，碱质来源于富集地幔的部分熔融，也受到地壳物质的混染．另一种意见强调富碱是由于岩浆侵位或分异过程中受到蒸发岩（特别是膏盐层）的混染与同化。笔者根据长江中下游有关岩体的大量岩石化学分析数据．分地区、分岩体、也按时代对其K2O、Na2O、CaO、MgO与SiO2的相关性作了直观性对比分析，事实表现出Na2O对SiO2几乎完全没有相关性，Na2O对SiO2可以说是独立变化的；K2O与MgO对SiO2具有不同程度的相关性；而CaO－SiO2则具有明显的直线性相关。据此提出：除了原始岩浆具有的碱质外，在岩浆分导过程中不时地有外来碱质加入，这些外来的碱质主要由中、下三叠统中的膏盐层提供。文中根据岩浆硫的δ34S值偏高、膏盐层主要矿物的自由能在高温下熔融及分解温度与低温下在水中的溶解度、石膏矿山的矿泉水中K＋、Na＋、C1＋、SO32-等的浓度，以及斜长石的环带构造方面作了论证．     

ASM1中废水和污泥组分浓度的测定方法研究

对呼吸计量法应用于校准ASM1作了简明的阐述。在呼吸速率与模型组分关系的基础上,介绍了ASM1中废水与污泥各组分浓度的测定方法,并指出模型组分细化的意义。