Der Weg in die Nachhaltigkeit

Ohne Zusammenfassung     

Selective supercritical fluid extraction to estimate the fraction of PCB that is bioavailable to a benthic organism in a naturally contaminated sediment

Selective supercritical fluid extraction (SFE) at 40 degrees C, 120 bar and 60 min was utilised as a means to estimate the bioavailable fraction of PCBs to chironomid larvae in a naturally contaminated limnic sediment. This extraction methodology removed about 50% of the PCBs from the sediment. According to the equilibrium partitioning theory, organisms in that sediment should decrease their uptake from the sediment to the same extent, biota-to-sediment accumulation factors (BSAFs) thus remaining constant. Surprisingly, the BSAFs for 11 PCB congeners decreased some 40% for the selectively extracted sediment as compared to BSAFs for organisms dwelling in untreated sediment. The results were statistically significant at the 0.001 level using a paired t-test. This can only be interpreted so that selective SFE removed easily available PCBs preferentially, leaving more tightly bound PCBs behind. Hence, by fine-tuning extraction conditions, this methodology might be used to estimate bioavailable fractions by chemical means.     

Persistence of methyl <Emphasis Type="Italic">tertiary</Emphasis> butyl ether (MTBE) against metabolism by Danish vegetation

BACKGROUND: Methyl tertiary butyl ether (MTBE) is the second most highly produced industrial chemical in the US and a frequent groundwater pollutant. At the same time, MTBE is quite persistent to biotic and abiotic decomposition. The goal of this study was to find plant species that could degrade MTBE and might be used in phytoremediation. METHODS: Excised roots and leaves (0.3 g) from more than 24 Danish plant species out of 15 families were kept in glass vessels with 25 ml spiked aqueous solution for 2 to 4 days. MTBE concentrations were 1 to 5 mg/L. Samples were taken directly from the solution with a needle and injected to a purge and trap unit. MTBE and the main metabolite, TBA, were measured by GC/FID. RESULTS AND DISCUSSION: Solutions with roots of poplar (Populus robusta) and a willow hybrid (Salix viminalis x schwerinii) produced TBA in trace amounts, probably stemming from bacteria. Significant MTBE reduction (> 10%) was not observed in any of the tests. Leaves from none of the species (trees, grasses and herbs) reduced the concentration of MTBE in the solution and no TBA, nor any other known metabolite of MTBE, was detected. CONCLUSION: It was not possible to find plants capable of efficiently degrading MTBE. This gives rise to the conclusion that plants probably cannot degrade MTBE at all, or only very slowly. RECOMMENDATIONS AND OUTLOOK: For phytoremediation projects, this has, as consequence, that the volatilization by plants (except with genetically engineered plants) is the only relevant removal process for MTBE. For risk assessment of MTBE, degradation by the plant empire is not a relevant sink process.     

Herausforderungen des Klimawandels

Ohne Zusammenfassung     

Operating parameters for high nitrite accumulation during nitrification in a rotating biological nitrifying contactor.

Incomplete nitrification was studied in a completely and partially submerged rotating biological contactor (RBC). In a partially submerged RBC without additional aeration, 50 to 90% nitrite accumulation (alpha) was achieved at rotation speeds (omega) of 2 to 18 min(-1). In a completely submerged RBC operating during 80 days, a higher alpha of 96% was achieved at omega = 2 min(-1). Incomplete nitrification in a completely submerged RBC at oxygen concentrations of 1.5 to 6.8 mg O2/L indicated that the mass transfer of oxygen is rate-limiting. Modeling of the completely submerged RBC predicts that the oxygen profile will not penetrate the biofilm more than 30 microm, thereby strongly limiting the nitrite-oxidizer growth and causing high nitrite accumulation. Molecular analysis (i.e., fluorescence in situ hybridization) indicated that the nitrite-oxidizers are superficially located (<200 microm) and that the ammonia-oxidizers comprise up to approximately 800 microm of the biofilm.     

Short-term Model of the Production of Construction Aggregates in Taiwan Based on Artificial Neural Networks

BACKGROUND: Taiwan's geography and limited stock of sandstone have caused sandstone resources to gradually decline to the point of exhaustion after long-term excavation. Moreover, the Taiwanese government has continuously increased the amount of land area near rivers that cannot be excavated to facilitate riverbed remediation and promote conservation of water resources. Accordingly, predicting and managing the annual production of construction aggregates in future construction projects, and dealing appropriately with some thorny problems, for instance, demand that excess supply, excessive excavation, unregulated excavation, and the consequent environmental damage, will significantly affect the efficient use of natural resources in a manner that accords with the national policy of Sustainable Development (SD). METHODS:. This study establishes an empirical model for forecasting the annual production of future construction aggregates using Artificial Neural Networks (ANN), based on 15 relevant socio-economic indicators, such as indicator of annual consumption of cement. A sensitivity analysis is then performed on these indicators. RESULTS AND DISCUSSION: This work applies ANN to estimate the annual production of construction aggregates; the estimates, the verification of the model and the sensitivity analysis are all acceptable. Furthermore, sensitivity analysis results indicate that the annual consumption of cement is the indicator that most strongly influences the production of construction aggregates, as well as whether construction waste can be recycled and steel structures can be used in buildings, helping to reduce the future production of construction aggregates in Taiwan. CONCLUSIONS: The elaborate prediction methodology presented in this study avoids some of the weaknesses or limitations of conventional linear statistics, linear programming or system dynamics. Additionally, the results not only provide a short-term prediction of the production of construction aggregates in Taiwan, but also provide a viable and flexible means of verifying quality certification of the production data of construction aggregates in the future by incorporating those relevant socio-economic indicators. RECOMMENDATIONS AND OUTLOOK: The continuity and quality of the database of relevant indicators used in this study should be closely scrutinized in order to ensure the SD means of exploiting resources.     

Photodegradation of polychlorinated dibenzo-p-dioxins and dibenzofurans in soil with vegetable oil

GOAL, SCOPE AND BACKGROUND: This study was carried out to investigate the effect of olive oil on the photodegradation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in contaminated sawmill soil. Previous studies had shown that the solubility of PCDD/Fs in olive oil is high and a rapid photodegradation of PCDD/Fs takes place in olive oil when irradiated with ultraviolet (blacklight) lamps. The efficiency of this treatment method was evaluated under more practical conditions. These included the use of sunlight irradiation and a lower-grade olive oil, without a preliminary extraction of soil with olive oil. METHODS: A 1-cm layer of contaminated sawmill soil was blended with 20 weight-% of olive oil and exposed to sunlight for four weeks. In another experiment, a new dose of olive oil was added at the middle of the exposure period. The PCDD/F concentrations of the soils were monitored periodically. RESULTS AND DISCUSSION: A reduction in the concentration of 2,3,7,8-chlorinated PCDD/Fs by 59% and in WHO-TEQ in contaminated sawmill soil by 48% was attained after blending the soil with two doses (20 + 20%) of olive oil and exposing the mixture to sunlight for four weeks. Photodegradation with only one dose of olive oil was less efficient. This suggests that periodical additions of olive oil would be needed to maintain a proper degradation rate. After the oil additions, the WHO-TEQ content of the soil declined with first order reaction half-lives of 19.2 to 19.7 d. The overall half-life during the four-week treatment, however, was 30 d. CONCLUSION: A significant reduction in the PCDD/F concentration of aged sawmill soil can be achieved with a relatively simple olive oil-sunlight treatment. RECOMMENDATIONS AND OUTLOOK: Some theoretical and technological questions need to be solved before using the investigated soil decontamination method in larger-scale applications. The functions of vegetable oils in photodegradation processes should be studied in more detail. The amount of oil that is needed for a proper solubilisation and photodegradation of PCDD/Fs should be minimised. Moreover, special care should be taken to prevent mobilisation of PCDD/Fs to the surrounding environment and to avoid leaving bioavailable residuals of PCDD/Fs in soil.     

Effects on the function of Arctic ecosystems in the short- and long-term perspectives

Historically, the function of Arctic ecosystems in terms of cycles of nutrients and carbon has led to low levels of primary production and exchanges of energy, water and greenhouse gases have led to low local and regional cooling. Sequestration of carbon from atmospheric CO2, in extensive, cold organic soils and the high albedo from low, snow-covered vegetation have had impacts on regional climate. However, many aspects of the functioning of Arctic ecosystems are sensitive to changes in climate and its impacts on biodiversity. The current Arctic climate results in slow rates of organic matter decomposition. Arctic ecosystems therefore tend to accumulate organic matter and elements despite low inputs. As a result, soil-available elements like nitrogen and phosphorus are key limitations to increases in carbon fixation and further biomass and organic matter accumulation. Climate warming is expected to increase carbon and element turnover, particularly in soils, which may lead to initial losses of elements but eventual, slow recovery. Individual species and species diversity have clear impacts on element inputs and retention in Arctic ecosystems. Effects of increased CO2 and UV-B on whole ecosystems, on the other hand, are likely to be small although effects on plant tissue chemisty, decomposition and nitrogen fixation may become important in the long-term. Cycling of carbon in trace gas form is mainly as CO2 and CH4. Most carbon loss is in the form of CO2, produced by both plants and soil biota. Carbon emissions as methane from wet and moist tundra ecosystems are about 5% of emissions as CO2 and are responsive to warming in the absence of any other changes. Winter processes and vegetation type also affect CH4 emissions as well as exchanges of energy between biosphere and atmosphere. Arctic ecosystems exhibit the largest seasonal changes in energy exchange of any terrestrial ecosystem because of the large changes in albedo from late winter, when snow reflects most incoming radiation, to summer when the ecosystem absorbs most incoming radiation. Vegetation profoundly influences the water and energy exchange of Arctic ecosystems. Albedo during the period of snow cover declines from tundra to forest tundra to deciduous forest to evergreen forest. Shrubs and trees increase snow depth which in turn increases winter soil temperatures. Future changes in vegetation driven by climate change are therefore, very likely to profoundly alter regional climate.