The value of the environment – Is it a matter of approach?

This paper discusses why estimates of the benefits of reduced air pollution differ in accordance with the approach used. Estimates based on bottom-up studies of the damage costs related to air pollution usually turn out much lower than estimates based on assessments of the utility of reduced air pollution, obtained for instance by willingness to pay assessments. This is usually explained by the fact that the willingness to pay approach includes the utility aspect of non-market values, and for this reason, it is often preferred to the damage cost approach. This is, however, not the whole story. The paper shows why alternative approaches should not be considered as being in conflict, but rather as means to get supplementary information necessary to put a value on environmental quality. Information from bottom-up assessments of damage costs and from studies of the willingness to pay is used in a macroeconomic model to carry out an evaluation of the social costs of energy saving measures in Hungary.     

Heavy metal pattern and solute concentration in soils along the oldest highway of the world – the AVUS Autobahn

Highways and main roads are a potential source of contamination for the surrounding environment. High traffic rates result in elevated heavy metal concentrations in road runoff, soil and water seepage, which has attracted much attention in the recent past. Nonetheless, investigations of pollutants in roadside soils are still a subject of major interest due to the rapid development of traffic systems and increasing traffic all over the world. The accumulation of the heavy metals Pb, Cd, Cu and Zn in soils along the oldest federal highway of the world has been studied by sampling a roadside transect of 125 by 10?m. In addition, heavy metal concentrations of Pb, Cd, Zn, Cu, Ni and Cr in soil solutions from different distances (2.5, 5 and 10?m) from the hard shoulder of the highway and from three soil depths (10, 30, and 50?cm) were investigated. The results show that heavy metal concentrations are up to 20 times increased compared to the geochemical background levels and a reference site of 800-m distance from the roadside. Soil matrix concentrations in the topsoil (0-10?cm) mostly exceeded the precautionary values of the German Federal Soil Protection and Contamination Ordinance (BBodSchV). The concentrations of Cd, Pb and Zn in the soil matrix tended to decrease with distance from the roadside edge, whereas the concentrations in the soil solution increased at a distance of 10?m onwards due to a lower soil pH. Because of both high pH values and a high sorption capacity of the soils, soil solution concentrations seldom exceeded the trigger values of the German Federal Soil Protection and Contamination Ordinance (BBodSchV) for transferring soil solution to groundwater.     

Simplified determination of lipophilic metabolites of nonylphenol ethoxylates: method development and application in aqueous samples from Buenos Aires, Argentina

In the present work we have developed an analytical methodology for the determination of nonylphenol (NP) and nonylphenol mono- and di-ethoxylates (NP1EO and NP2EO) in water samples. The applicability of this methodology was proved by means of the analysis of environmentally relevant aqueous samples from Buenos Aires. This constitutes a starting point for a rigorous assessment of the incidence of NPnEO surfactants in Argentina, as only very few, qualitative or semi-quantitative data on the occurrence of these compounds in local systems were available up to this time. Enrichment of the analytes was carried out by solid-phase extraction on a C-18 sorbent, followed by elution with ethyl acetate. Normal-phase high performance liquid chromatography on an amino-silica column and fluorescence detection at excitation-emission wavelengths of 230-300 nm were employed for separation and quantification of the analytes. Confirmation of peak assignment in selected real samples was performed by off-line coupling HPLC with GC-MS analysis. A non-polar GC capillary column was used, and a characteristic peak pattern was obtained for the alkyl chain isomers of each ethoxylated homologue and NP. GC-MS analyses yielded in all cases purity levels higher than 80% for the HPLC collected fractions. The elevated concentrations found for the estrogenic metabolites of NPnEO are in accordance with an unrestricted use of this class of non-ionic surfactants in the country.     

Assessing benthic community condition in Chesapeake Bay: does the use of different benthic indices matter?

Federal and state environmental agencies conduct several programs to characterize the environmental condition of Chesapeake Bay. These programs use different benthic indices and survey designs, and have produced assessments that differ in the estimate of the extent of benthic community degradation in Chesapeake Bay. Provided that the survey designs are unbiased, differences may exist in the ability of these indices to identify environmental degradation. In this study we compared the results of three indices calculated on the same data, and the assessments of two programs: the Chesapeake Bay Program and the Mid-Atlantic Integrated Assessment (MAIA). We examined the level of agreement of index results using site-based measures of agreement, evaluated sampling designs and statistical estimation methods, and tested for significant differences in assessments. Comparison of ratings of individual sites was done within separate categories of water and sediment quality to identify which indices summarize best pollution problems in Chesapeake Bay. The use of different benthic indices by these programs produced assessments that differed significantly in the estimate of degradation. A larger fraction of poor sites was classified as good by the Environmental Monitoring and Assessment Program’s Virginian Province and MAIA benthic indices compared to the Chesapeake Bay benthic index of biotic integrity, although overall classification efficiencies were similar for all indices. Differences in survey design also contributed to differences in assessments. The relative difference between the indices remained the same when they were applied to an independent dataset, suggesting that the indices can be calibrated to produce consistent results.     

Risk on the ramble: The international transfer of risk and vulnerability

In this paper the purpose is to discuss a concept of technology that can explain how the transfer of technology implies the risk of new failures, misuse, accidents and unhealthy workplaces. Production technologies are often transformed through a steady stream of incremental changes appropriate to their social context, and the technology will therefore gradually acquire some contextually dependent preconditions for use. These preconditions will most probably be revealed when a technology is transferred from one context to another. Thus, a technology transfer project may trigger a long process of re-innovations just to make the technology fully operational in its new context. In a transfer process, technological risks may arise due to incomplete transfer of mastering capacity; mismatch between transferred technology and the environment; transfer of latent conditions for failure; and the transformation of latent conditions or known risks when the technology is installed in a new environment. Longitudinal data from the Norwegian petroleum industry indicates that the first phases in a transfer process will create high technological risks. It will take many years before the transferred technologies are adapted to the new context and the risk level has been normalised.     

Atmospheric composition change research: Time to go post-normal?

For more than two decades a number of frameworks for scientific knowledge production are being proposed by science and technology researchers. They all advocate an extended involvement of non-specialists, in particular when it comes to knowledge production applicable to practical societal problems. We look to what extent these new frameworks have taken ground within a particular research community: the ACCENT Network of Excellence which coordinates European atmospheric chemistry and physics research applicable to air pollution and climate change. We did so by stimulating a debate through a “blog”, a survey and in-depth interviews with ACCENT scientists about the interaction between science, policy making and civil society, to which a great deal of ACCENT member contributed in writing or verbally. Most of them had interactions with policy makers and/or the general public, and they generally believe that interactions with spheres other than the scientific are needed. While such interactions give personal insight and satisfaction, they seem to have little impact on the goals and the practice of the scientific work itself. Extended frameworks of science production that go beyond the disciplinary mode seem to emerge at the level of individual scientists, yet they still need to find their way to the level of scientific project management. In this paper we discuss the justifications and barriers to implement a higher degree of extended knowledge integration in applied science projects such as ACCENT. It is felt that the community of atmospheric chemists and physicists is mature for such an implementation and recommendations are given to help and make this happen.     

How Should Support for Climate-Friendly Technologies Be Designed?

Stabilizing global greenhouse gas concentrations at levels to avoid significant climate risks will require massive “decarbonization” of all the major economies over the next few decades, in addition to the reduced emissions from other GHGs and carbon sequestration. Achieving the necessary scale of emissions reductions will require a multifaceted policy effort to support a broad array of technological and behavioral changes. Change on this scale will require sound, well-thought-out strategies. In this article, we outline some core principles, drawn from recent social science research, for guiding the design of clean technology policies, with a focus on energy. The market should be encouraged to make good choices: pricing carbon emissions and other environmental damage, removing distorting subsidies and barriers to competition, and supporting RD&D broadly. More specific policies are required to address particular market failures and barriers. For those technologies identified as being particularly desirable, some narrower RD&D policies are available.     

Grading of Parameters for Urban Tree Inventories by City Officials, Arborists, and Academics Using the Delphi Method

Tree inventories are expensive to conduct and update, so every inventory carried out must be maximized. However, increasing the number of constituent parameters increases the cost of performing and updating the inventory, illustrating the need for careful parameter selection. This article reports the results of a systematic expert rating of tree inventories aiming to quantify the relative importance of each parameter. Using the Delphi method, panels comprising city officials, arborists, and academics rated a total of 148 parameters. The total mean score, the top ranking parameters, which can serve as a guide for decision-making at practical level and for standardization of tree inventories, were: Scientific name of the tree species and genera, Vitality, Coordinates, Hazard class, and Identification number. The study also examined whether the different responsibilities and usage of urban tree databases among organizations and people engaged in urban tree inventories affected their prioritization. The results revealed noticeable dissimilarities in the ranking of parameters between the panels, underlining the need for collaboration between the research community and those commissioning, administrating, and conducting inventories. Only by applying such a transdisciplinary approach to parameter selection can urban tree inventories be strengthened and made more relevant.     

Morphologie effects of channelization: the case of the Neebing-McIntyre floodway,Thunder Bay,Ontario, Canada

The Neebing-McIntyre floodway in Thunder Bay, Ontario, Canada, has been constructed with a relatively straight and uniform trapezoidal channel, compared with the prechannelized sinuous reaches of the Neebing and the McIntyre rivers. The flow regime of the floodway also contrasts significantly with the prechannelized regime, because of the combination of discharges from these rivers into a new channel and the regulation of flows by a diversion structure. The maximum channel capacity of the floodway is about 284 m³ s^–1 (175-year regional flood), compared with about 40 m³ s^–1 and 60 m³ s^–1, respectively, for the Neebing and the McIntyre. According to regime theories, the construction of a straight and trapezoidal channel has upset the equilibrium of the stream system and therefore should lead to some accelerated erosion and sedimentation processes in the new channel immediately after construction. Erosion potential is particularly high during higher discharge events, when flow velocities are expected to be greater than the prechannelized velocities of the Neebing and the McIntyre. The overall sediment yield of the watershed is low (71t km^–2 yr^–1), compared with other documented watersheds of North America, but the rates of deposition in the floodway are relatively high, mainly due to the backwater effect of Lake Superior. Unless maintained by constant channel work, the floodway will tend to fill up with sediment, until a postconstructional equilibrium is reestablished.