Effects of oyster shell on soil chemical and biological properties and cabbage productivity as a liming materials

Oyster shell, a byproduct of shellfish-farming in Korea and containing a high amount of CaCO(3), has a high potential to be used as a liming material in agriculture. However, the agricultural utilization of oyster shell is limited due to its high concentration NaCl. The oyster-shell meal collected had a low concentration of water soluble NaCl (mean 2.7 g kg(-1)), which might be a result of stacking the material for 6 months in the open field. It has a very similar liming potential with calcium carbonate, with 3.4 and 3.8 Mg ha(-1) for silt loam (SiL, pH 6.2) and sandy loam (SL, pH 5.8) to bring the soil pH to 6.5, respectively. To determine the effect of crushed oyster-shell meal on improving soil chemical and biological properties and crop plant productivity, oyster-shell meal was applied at rates of 0, 4, 8, 12, and 16 Mg ha(-1) before transplanting Chinese cabbage (Brassica campestris L.) in the two soils mentioned above. Soil pH was significantly increased to 6.9 and 7.4 by 16 Mg ha(-1) shell meal application (4 times higher level than the recommendation) in SiL and SL, respectively, at harvesting stage. The effect of liming was found higher in SL compared to SiL soil, probably due to the different buffering capacity of the two soils. The concentration of NaCl and EC value of soils were found slightly increased with shell meal applications, but no salt damage was observed. Oyster-shell meal application increased soil organic matter, available P, and exchangeable cations concentrations. The improved soil pH and nutrient status significantly increased the microbial biomass C and N concentrations and stimulated soil enzyme activities. With the exception of acid phosphomonoesterase (PMEase) activity, which decreased with increasing soil pH in SL but slightly increased in SiL, the activities of urease and alkali PMEase increased markedly with increasing soil pH by shell meal application. The improved soil chemical and biological properties resulted in increased crop productivity. The highest yield in Chinese cabbage was achieved following the application of 8 Mg ha(-1) oyster-shell meal. Conclusively, crushed oyster shell could be used as an alternative liming material to restore the soil chemical and microbial properties in upland soil and to increase crop productivity.     

Long-term effects of fertilization on the forms and availability of soil phosphorus in rice paddy

The changes in total P accumulation and P compounds with time in the plough layer in a paddy soil in southern Korea were investigated in relation to the continuous application of chemical fertilizers (NPK), straw based compost (Compost), combination these two (NPK+Compost) for 31 years. Continuous fertilization increased the total and inorganic P contents in plough layers. In NPK, inorganic P fraction did not change with time, but organic P content increased significantly. Long-term application of chemical fertilizer together with compost accelerated the decrease in the organic P fraction, presumably due to promoting microbial activity in the plow layer, and then increased significantly inorganic P fraction. Compost application decreased the residual P and Fe-P fractions and then increased inorganic P fraction, in spite of continuous compost application. Increase in total, inorganic and extractable P with time may be closely related to the increase in the availability of accumulated P for rice growth.     

Control of mercury vapor emissions from combustion flue gas

GOAL, SCOPE AND BACKGROUND: Mercury (Hg) emission from combustion flue gas is a significant environmental concern due to its toxicity and high volatility. A number of the research efforts have been carried out in the past decade exploiting mercury emission, monitoring and control from combustion flue gases. Most recently, increasing activities are focused on evaluating the behavior of mercury in coal combustion systems and developing novel Hg control technologies. This is partly due to the new regulatory requirement on mercury emissions from coal-fired combustors to be enacted under the U.S. Title III of the 1990 Clean Air Act Amendments. The aim of this review work is to better understand the state-of-the-art technologies of flue gas mercury control and identify the gaps of knowledge hence areas for further opportunities in research and development. MAIN FEATURES: This paper examines mercury behaviors in combustion systems through a comprehensive review of the available literature. About 70 published papers and reports were cited and studied. RESULTS AND DISCUSSION: This paper summarizes the mechanisms of formation of mercury containing compounds during combustion, its speciation and reaction in flue gas, as well as subsequent mobilization in the environment. It also provides a review of the current techniques designed for real-time, continuous emission monitoring (CEM) for mercury. Most importantly, current flue gas mercury control technologies are reviewed while activated carbon adsorption, a technology that offers the greatest potential for the control of gas-phase mercury emissions, is highlighted. CONCLUSIONS AND RECOMMENDATIONS: Although much progress has been achieved in the last decade, techniques developed for the monitoring and control of mercury from combustion flue gases are not yet mature and gaps in knowledge exist for further advancement. More R&D efforts are required for the effective control of Hg emissions and the main focuses are identified.     

Crustacean habitat potential mapping in a tidal flat using remote sensing and GIS

To make a macrofaunal (crustacean) habitat potential map, the spatial distribution of ecological variables in the Hwangdo tidal flat, Korea, was explored. Spatial variables were mapped using remote sensing and a geographic information system (GIS) combined with field observations. A frequency ratio (FR) and logistic regression (LR) model were employed to map the macrofauna potential area for the Ilyoplax dentimerosa, a crustacean species. Spatial variables affecting the tidal macrofauna distribution were selected based on abundance and biomass and used within a spatial database derived from remotely sensed data of various types of sensors. The spatial variables included the intertidal digital elevation model (DEM), slope, distance from a tidal channel, tidal channel density, surface sediment facies, spectral reflectance of the near infrared (NIR) bands and the tidal exposure duration. The relation between the I. dentimerosa and each spatial variable was calculated using the FR and LR. The species was randomly divided into a training set (70%) to analyse habitat potential using FR and LR and a test set (30%) to validate the predicted habitat potential map. The relations were overlaid to produce a habitat potential map with the species potential index (SPI) value for each pixel. The potential habitat maps were compared with the surveyed habitat locations such as validation data set. The comparison results showed that the LR model (accuracy is 85.28%) is better in prediction than the FR (accuracy is 78.96%) model. The performance of models gave satisfactory accuracies. The LR provides the quantitative influence of variables on a potential habitat of species; otherwise, the FR shows the quantitative influence of a class in each variable. The combination of a GIS-based frequency ratio and logistic regression models and remote sensing with field observations is an effective method to determine locations favorable for macrofaunal species occurrences in a tidal flat.     

Parametrization of groundwater quality of the Quaternary aquifer in N’Djamena (Chad), Lake Chad Basin: application of numerical and multivariate analyses

The urban groundwater of the Quaternary aquifer of the Lake Chad basin in N’Djamena has been subject to many hydrochemical studies. However, the results are often not presented in a way that enables water quality managers to make an appropriate decisions, which restrict development and poverty reduction efforts. The objective of the present study was to contribute the improved management of the local groundwater resources. A total of 85 groundwater samples were interpreted using hydrochemical techniques associated with integrated numerical indices and multivariate statistical analysis. The hydrochemical results coupled with the relative residence time of water have shown that the chemical composition of these waters is linked to geogenic and anthropogenic factors and to their proximity to the Chari-Logone rivers. These investigations showed that the groundwater quality in N’Djamena is characterized by a high spatial variability. This study also assessed the suitability of groundwater for user needs and identified areas which are more/less favorable for a specific use. The evaluation of water quality and its suitability for human consumption is also a problem of optimizing data acquisition strategy, and this study used the correlation between water quality index (WQI) and electrical conductivity (EC) to orientate future data acquisition strategies. This parametrization can assist the decision makers and water management professionals in evaluating groundwater availability and setting up a robust water quality management plan in areas with similar hydrogeological and climatic conditions.

     

Polychlorinated dibenzo-p-dioxin (PCDD) and dibenzofuran (PCDF) isomer patterns from municipal waste combustion: formation mechanism fingerprints

Polychlorinated dibenzo-p-dioxin (PCDD) and dibenzofuran (PCDF) byproducts can be formed in combustion systems by a variety of mechanisms. While total PCDD/F emissions and, to a lesser extent, homologue distributions from incinerators have been found to vary widely depending on combustion conditions, PCDD/F isomer distributions do not. Formation mechanisms can be grouped into two general categories: condensation of precursors, such as chlorinated phenols, and formation from particulate carbon, termed de novo synthesis. In addition to these mechanisms, chlorination and dechlorination reactions may affect isomer patterns. In this work, isomer patterns from field and laboratory municipal waste combustion samples are compared with computed thermodynamic distributions and those from the following experimental investigations: both gas-phase and metal-catalyzed condensation of chlorinated phenols, chlorination of dibenzo-p-dioxin and dibenzofuran, and dechlorination of octachlorodibenzo-p-dioxin and octachlorodibenzofuran. PCDD/F isomer patterns produced by different formation mechanisms in controlled experiments are distinct and robust, largely unaffected by combustion conditions. PCDD isomer patterns from municipal waste combustion are most similar to those produced by CuCl(2)-catalyzed phenol condensation from 10 chlorinated phenols. PCDF isomer patterns are most similar to those produced by chlorination and dechlorination.     

Impact of separating dairy cattle excretions on ammonia emissions

About 80% of dairy cattle N intake is excreted in urine and feces. Urinary-N is about 75% urea, whereas fecal-N is mostly organic. Urinary-N (urea) can only be volatilized when it is hydrolyzed to ammonia (NH3) in a process catalyzed by urease, which is predominantly found in feces. Minimizing contact between urine and feces may be an effective approach to reducing urea hydrolysis and subsequent NH3 emissions. Previous studies have reported 5 to 99% NH3 emissions mitigation within barns from separation of feces and urine. The objective ofthis study was to compare NH3 emissions mitigation via separation of urine and feces in postcollection storage to a conventional scrape manure handling method where urine and feces are comingled. Laboratory scale studies were conducted to evaluate NH3 emissions from simulated postcollection storag of three waste streams: (i) idealistically separated feces and urine (no contact between urine and feces), (ii) realistically separated urine and feces (limited contact of urine and feces), and (iii) conventionally scraped manure (control). From the results of these studies, NH3 losses ranking in descending order was as follows: aggregate of realistically separated waste streams (3375.9 +/- 54.8 mg), aggregate of idealistically separated urine and feces (3047.0 +/- 738.0 mg), and scrape manure (2034.0 +/- 106.5 mg), respectively. Therefore, on the basis of these results, the extra effort of separating the waste streams would not enhance mitigation of NH3 losses from postcollection storage of the separated waste streams compared to the conventional scrape manure collection system.