Institutional controls for future land use at active installation restoration program (IRP) sites

One of the strategies now in vogue in hazardous waste cleanup is basing remedial strategies on future land use. The initial thrust of CERCLA for permanent and complete remedies has given way, pushed by concepts like “brownfields” and base closure and reuse, to strategies often based on “institutional controls” that attempt to stabilize future land uses at a site based on residual risk. The heart of this concept is that instead of removing all wastes from a site, some wastes can safely remain so long as in the future the site is not used in such a way that the residual contamination poses an unacceptable risk to human health and the environment. “Institutional controls” is a term for land use management strategies that do not rely on engineering approaches to reduce risk, but rather seek to ensure that the site is not used in an inappropriate way in the future. This article cautions that such a strategy has inherent residual risks that must be understood by those involved in implementing hazardous waste cleanups and those responsible for future uses of contaminated property. Simply put, institutional controls are only as good as the processes that are in place to ensure they are respected in the future. This presents particular problems for active duty installations because most of the protections commonly available to private sector sites are not useful at active installations. This article discusses an initiative by the Air Combat Command to develop a handbook on instituting and maintaining land restrictions. It will also discuss that effort in light of the April 21 EPA Region IV guidance on assuring Land Use Controls at Federal Facilities. This article is based on a paper and presentations given at the 1998 ACC Environmental Training Symposium.     

Evaluation of the RAMS Continuous Monitor for Determination of PM2.5 Mass Including Semi-Volatile Material in Philadelphia,PA

Abstract

The real-time ambient mass sampler (RAMS) is a continuous monitor based on particle concentrator, denuder, drier, and tapered element oscillating microbalance (TEOM) monitor technology. It is designed to measure PM_2.5 mass, including the semi-volatile species NH₄NO₃ and semi-volatile organic material, but not to measure PM_2.5 water content. The performance of the RAMS in an urban environment with high humidity was evaluated during the July 1999 NARSTO-Northeast Oxidant and Particles Study (NEOPS) intensive study at the Baxter water treatment plant in Philadelphia, PA. The results obtained with the RAMS were compared to mass measurements made with a TEOM monitor and to constructed mass obtained with a Particle Concentrator-Brigham Young University Organic Sampling System (PC-BOSS) sampler designed to determine the chemical composition of fine particles, including the semi-volatile species. An average of 28% of the fine particulate material present during the study was semi-volatile organic material lost from a filter during particle collection, and 1% was NH₄NO₃ that was also lost from the particles during sampling. The remaining mass was dominantly nonvolatile (NH₄)₂SO₄ (31%) and organic material (37%), with minor amounts of soot, crustal material, and nonvolatile NH₄NO₃. Comparison of the RAMS and PC-BOSS results indicated that the RAMS correctly monitored for fine particulate mass, including the semi-volatile material. In contrast, the heated filter of the TEOM monitor did not measure the semi-volatile material. The comparison of the RAMS and PC-BOSS data had a precision of ±4.1 μg/m³ (±9.6%). The precision of the RAMS data was limited by the uncertainty in the blank correction for the reversible adsorption of water by the charcoal-impregnated cellulose sorbent filter of the RAMS monitor. The precision of the measurement of fine par-ticulate components by the PC-BOSS was ±6-8%.     

Dye-sensitized photodegradation of the fungicide carbendazim and related benzimidazoles

The present work studies the visible-light-promoted photodegradation of the colorless fungicide carbendazim (methyl 2-benzimidazolecarbamate) and several 2-substituted benzimidazoles (SBZ's), in water or water-methanol solution, in the presence of air and, as a photosensitizer, the synthetic xanthene dye Rose Bengal (RB) or the natural pigment riboflavin (Rf). The results indicate that the degradation of each particular SBZ depends on its chemical structure and on the sensitizer employed. In the presence of RB, the degradation always operates via a singlet molecular oxygen (O(2)((1)Delta(g)))-mediated mechanism, through a highly efficient process, as deduced from the comparison of the rate constants for physical and chemical quenching of O(2)((1)Delta(g)). In the presence of Rf, the visible-light irradiation of any of the studied SBZ's produces a series of competitive processes that depend on the relative concentrations of Rf and SBZ. These processes include the quenching of excited singlet and triplet Rf states by the SBZ and the generation of both O(2)((1)Delta(g)) and superoxide radical anion (O(2)(-)), the latter generated by electron transfer from excited Rf species to the dissolved oxygen. The overall result is the photodegradation of the SBZ and the photoprotection of the sensitizer.     

Agricultural pesticide residues in farm ditches of the Lower Fraser Valley, British Columbia, Canada

Transient and permanent farm ditches flowing to the Lower Fraser River tributary fish streams of British Columbia, Canada, were sampled at several locations in 2003-2004 to determine the occurrence and concentration of residues of selected pesticides, their transformation products, and soluble/extractable Cu++ ions. Of the 43 compounds analyzed, 28 and 22 pesticides were detected in transient farm ditch water and sediments, respectively. About 34% fewer pesticides, however, were found in both matrices of permanent farm ditches. Average concentrations (microg L(-1)) of those most frequently detected in permanent farm ditch water were atrazine (0.20), alpha -chlordane (0.06), desethylatrazine (0.13), diazinon (0.55), dieldrin (0.28), endosulfan sulfate (0.16), glyphosate (6), metalaxyl (0.27); and soluble Cu++ ions (25). Those most often found in ditch sediments (microg kg(-1)) were aminomethylphosphonic acid (AMPA) (2,300), 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)ethane (DDT) (250), endosulfan sulfate (500), glyphosate (1,225); and extractable Cu++ ions (58,000). The risk potential of these pesticide residues to non-target aquatic organisms inhabiting Fraser River tributary fish streams contiguous to permanent farm ditches is evaluated and discussed.     

Effect of specimen planar area on electromagnetic flanging

The specimen parameter that is often mentioned with respect to the ability to achieve electromagnetic forming (EMF) is the specimen thickness. If the skin depth is small compared to this parameter, efficient forming will be achieved. However, another parameter that may affect the ability to achieve efficient forming is the specimen's planar area, i.e., the length and width of the specimen. This would particularly become an important factor if EMF is used to fabricate meso/microscale components. In this research, a flat spiral coil was used to flange 0.508 mm thickness, CuZn30 specimens of varying widths (i.e., 10, 14, 18, 22, 35, and 47 mm). These widths were varied in order to modify the projected area of the coil over the specimen. Results showed that a decrease in the specimen width was generally associated with a decrease in forming (i.e., lower flanging angle) due to edge effects in induced eddy currents. Since the magnetic field distribution from the flat spiral coil is asymmetric, material was overhung on both sides of the die. This yielded an extra half turn on the left side of the specimen, and increased forming. The die was also translated to assess differences in flanging generated. In order to achieve meso/microforming with EMF, attention to the interaction between coil design and specimen dimensions is required.     

Conservation in Brazil's Chocolate Forest: The Unlikely Persistence of the Traditional Cocoa Agroecosystem

/ In southern Bahia, Brazil, the traditional cocoa agroecosystem with a dense shade canopy of native trees is now recognized as a secondary conservation route for highly endangered Atlantic Rainforest species. This "chocolate forest" of the densely shaded farms persists despite a massive 20-year Brazilian government modernization program in which shade was seen as a chief impediment to raising cocoa production. The objective of this study was to determine how this traditional agroecosystem endured. Although dense shade limits cocoa yield, it provides several agroecological benefits: control of insect pests and weeds, microclimate stability, and soil fertility maintenance. A keycomponent of modernization efforts was a shade-tree removal program designed to maximize cocoa production by using low shade and fertilizer while substituting agrochemicals for many beneficial roles of the overhead trees. This research found that many farmers rejected, or only partially accepted, the shade reduction process although it promised much higher cocoa yield and profit. Farmers employing a wide range of shading were interviewed, and it was found that decisions to remove or maintain the shade trees were linked to both agroecological and risk-minimization factors. Farmers' perceptions of the agroecological functions of the shade trees and individual willingness to entertain the economic risk associated with substituting agrochemicals for these were important. A less-profitable, but lower-risk approach of occasional fertilizer and agrochemical use with the traditional shade intact was a rational and widespread choice. Policies designed to maintain the traditional agroecosystem through the current economic crisis should heed the multiple functions of the overhead trees. KEY WORDS: Conservation; Brazil; Atlantic Rainforest; Cocoa; Agroecology; Risk; Agroforestry     

QUALITY ASSURANCE TECHNIQUES FOR ELECTRONIC DATA ACQUISITION1

ABSTRACT: Electronic instruments are increasingly being used to gather water quality data. Quality assurance protocols are needed which provide adequate documentation of the procedures followed in calibration, collection, and validation of electronically acquired data. The level of precision of many data loggers exceeds the technology which is commonly used to make field measurements. Overcoming this problem involves using laboratory quality equipment in the field or enhanced quality control at the time of instrument servicing. Time control procedures for data loggers are needed to allow direct comparisons of data between instruments. Electronic instruments provide a mechanism to study transient events in great detail, but, without time controls, multiple loggers produce data which contain artifacts due to timing errors. Individual sensors deployed with data loggers are subject to different degrees of drift over time. Certain measurements can be measured with defined precision and accuracy for long periods of time, while other sensors are subject to loss of both precision and accuracy with increasing time of use. Adequate quality assurance requires the levels of precision and accuracy be documented, particularly those which vary with increasing time deployment.     

WATERSHED MANAGEMENT MANPOWER AND EMPLOYER SURVEY1

ABSTRACT: Two surveys were conducted to determine the supply and demand for students trained in watershed management in the United States. The first survey of 23 educational institutions was conducted in 1978. Annual production of about 100 watershed graduates and employment success greater than 85 percent at all degree levels was indicated. The second survey of watershed employment within the U.S. Forest Service (conducted in 1979) indicated one-third of the annual supply of watershed graduates could be employed by the agency; a fact verified by employment data supplied by educational institutions.     

INCREASES IN SODIUM AND CHLORIDE IN THE MOHAWK RIVER,NEW YORK,FROM THE 1950'S TO THE 1970'S ATTRIBUTED TO ROAD SALT1

Regression analyses of major ion concentration in relation to specific conductance of water from the Mohawk River during two separate periods, 1951–53 and 1970–74, indicate statistically insignificant changes in the linear relationship of all constituents studied except chloride. Mean values and changes in the slopes of these relationships indicate that sodium and chloride have had consistently higher yields, in kilograms per square kilometer per year, than the other ions, although all ions show a general 20 percent increase in yields during the two decades. This general increase in ion yields is attributed to an accelerated transport rate of ions out of the basin as a result of a 19 percent increase in mean stream discharge. Transport rates of sodium and chloride have increased by 72 and 145 percent, respectively, in the Mohawk River since the early 1950's. Analysis of the sodium and chloride sources indicates rock salt used as a road deicei to be the primary source. This salt use accounts for 96 percent of the sodium transport increase and 69 percent of the chloride transport increase within the basin during the last two decades.     

WATER FOR ENERGY: AN APPROACH TO COMPREHENSIVE IMPACT ASSESSMENT1

ABSTRACT: The effects of energy development on the water resources of the Colorado River and Great Basin regions is expected to be substantial. Complex physical, economic and institutional interactions may be expected. Most research on these impacts appears single purpose, fragmented, uncoordinated, and often inaccessible to potential users - particularly those with responsibility for energy/water policy and program decisions. A comprehensive, integrative framework for assessing alternative water allocation decisions is outlined, taking a heuristic decision making model for evaluating impacts on maximization of gross (or net) regional product, and regional social welfare, and for assessing the region's contribution to national objectives. The suggested model provides a structure for application and integration of data of various kinds to a range of situations arising from possible impacts from energy proposals. The focus is on water and energy relationships but the model may provide a framework for comprehensive analysis of a variety of environmental actions and resulting system perturbations and effects.