Optimal pollution in the presence of adjustment costs

This paper explores optimal pollution control when pollution is considered a stock and costs of treating pollution are a function both of the level and rate of change of pollution control. It is shown that even if the long run optimum stock of pollution is below the initial level adjustment costs may imply an optimally increasing stock of pollution in the short run. The results obtained are contrasted with those which emerge when adjustment costs are absent and when damages are taken to be a function of the flow of pollution; the appropriate tax rates of polluting discharges are examined.     

Can progress in reducing alcohol-impaired driving fatalities be resumed? Results of a workshop sponsored by the Transportation Research Board,Alcohol, Other Drugs,and Transportation Committee (ANB50)

Objective: Despite successes in the 1980s and early 1990s, progress in reducing impaired driving fatalities in the United States has stagnated in recent years. Since 1997, the percentage of drivers involved in fatal crashes with illegal blood alcohol concentration (BAC) levels has remained at approximately 20 to 22%. Many experts believe that public complacency, competing social and public health issues, and the lack of political fortitude have all contributed to this stagnation. The number of alcohol-related crashes, injuries, and fatalities is still unacceptable, and most are preventable. The public needs to be aware that the problem presented by drinking drivers has not been solved. Political leaders need guidance on which measures will affect the problem, and stakeholders need to be motivated once again to implement effective strategies.

Methods: The National Academy of Sciences (NAS) Transportation Research Board (TRB), Alcohol, Other Drugs, and Transportation Committee (ANB50) sponsored a workshop held at the NAS facility in Woods Hole, Massachusetts, on August 24–25, 2015, to discuss the lack of progress in reducing impaired driving and to make recommendations for future progress. A total of 26 experts in research and policy related to alcohol-impaired driving participated in the workshop. The workshop began by examining the static situation in the rate of alcohol-impaired driving fatal crashes to determine what factors may be inhibiting further progress. The workshop then discussed 8 effective strategies that have not been fully implemented in the United States. Workshop participants (16 of the 26) rated their top 3 strategies.

Results: 3 strategies received the most support: 1. Impose administrative sanctions for drivers with BACs = 0.05 to 0.08 g/dL.

2. Require alcohol ignition interlocks for all alcohol-impaired driving offenders.

3. Increase the frequency of sobriety checkpoints, including enacting legislation to allow them in the 11 states that currently prohibit them.

5 other important strategies included the following: (1) increase alcohol taxes to raise the price and reduce alcohol consumption; (2) reengage the public and raise the priority of impaired driving; (3) lower the illegal per se BAC limit to 0.05 for a criminal offense; (4) develop and implement in-vehicle alcohol detection systems; and (5) expand the use of screening and brief interventions in medical facilities.

Conclusions: Each of these strategies is proven to be effective, yet all are substantially underutilized. Each is used in some jurisdictions in the United States or Canada, but none is used extensively. Any one of the 3 strategies implemented on a widespread basis would decrease impaired driving crashes, injuries, and fatalities. Based on the research, all 3 together would have a substantial impact on the problem.     

Total and Extractable Trace Elements in Lebanese River Sediments: Dry Season Data

Years of political instability have left Lebanon with significant gaps in environmental knowledge. This paper reports new results for trace metals in bed sediments of the river Nahr-lbrahim. The drainage basin of the river Nahr-lbrahim is largely floored by karstified limestone. Metal pollution is operative within the catchment. The objectives of this study were first to identify possible sources of metals (geological and/or anthropogenic) and then to characterise the chemical partitioning of the metals in the sediments. Bed load sediments were sampled at five locations along a 13km stretch from the river mouth, during the dry season. Samples were collected on two dates, dried and then sieved into three mechanical fractions. We report total Fe, Cu, Pb and Zn contents of the <75m sediment fraction for the dry season and interpret the results in terms of geology and point and non-point discharges to the river. Total metal contents were derived from summing the concentrations of metals in the chemical fractions of the sediments. A sequential chemical extraction procedure was applied to the <75m fraction and the data showed that, except for Fe, the carbonate fraction had the largest role in metal sediment deposition.     

Viewer preference for spatial arrangement of park trees: An application of video-imaging technology

Research on perception of parks and recreation settings has examined several important tree attributes that influence people's visual preferences. This research, however, has usually not considered the spatial arrangement of the trees, partly because of the lack of adequate methods for representing tree arrangements with systematically manipulated geometries. In the study reported here, computer video-imaging techniques were used to construct simulated landscape scenes that varied on specific dimensions of the spatial configuration of trees. The simulations were rated for visual preference by three respondent groups: a university class, a bicycle club, and a women's civic group. Preference ratings were significantly influenced by the number of trees in the scene, by the number of clumps into which trees were grouped, and by the diameter of the clumps. The video-imaging technology implemented in this study offers important methodological advantages for the design of carefully controlled experiments to study human response to variation in landscape treatments.     

Aging properties of extruded high-amylose starch

The structural and mechanical properties of extruded high-amylose and normal cornstarch were studied as a function of time and humidity to determine the suitability of high-amylose cornstarch for use in biodegradable plastic materials. After extrusion at 170°C and 20–30% moisture, high-amylose starch was mostly amorphous, with small amounts of V- and A-type crystal structures. Tensile strengths for the extruded high-amylose starch ribbons were rather stable with time (65, 50, and 35 MPa at 20, 50, and 80% RH) and were higher than those for normal cornstarch (25, 40, and 15 MPa after 84 days at 20, 50, and 80% RH). Elongations at break declined gradually with time for high-amylose starch (6, 11, and 11% after 84 days at 20, 50, and 80% RH), while rapid declines were seen for normal cornstarch at higher humidities (3, 9, and 3% after 84 days at 20, 50, and 80% RH). Differential scanning calorimetry revealed that normal cornstarch aged at a high humidity had much larger sub-T _g endotherms than high-amylose cornstarch. These endotherms reflect decreases in enthalpy and free volume which occur in amorphous polymers due to structural relaxation. It appears, therefore, that plastic materials prepared from gelatinized or melted high-amylose cornstarch should have greater strength and flexibility and slower physical aging than those prepared from gelatinized normal cornstarch.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Product names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by the USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Optimal design for water conservation and energy savings using green roofs in a green building under mixed uncertainties

Most water conservation and energy saving strategies for residential homes and commercial buildings have higher initial capital investment than traditional ones. Yet, the added benefits of these “green” building strategies should outweigh the increase of initial capital cost at the end of the house lifetime. Using green roof systems to cool houses gives rise to uncertainties from local precipitation patterns and the unstable market related costs and benefits. The optimal area of green roof to balance cost, benefit, and risk remains unknown. To achieve such a complex systems analysis, a grey stochastic programming model was prepared to address the optimal design strategies under mixed uncertainties. Such a cost-benefit-risk trade-off model was formulated for this study through an optimization framework to retrieve the optimal design strategies with respect to a typical Florida residential home (shingle and metal roofs). It is particularly designed to synergistically integrate a green roof with beneficial reuse of gray water and stormwater while achieving some degree of energy savings. The study identifies the optimal green roof area that keeps within the cost of a conventional home over a specific life time, such as 50 years. Research findings show that as the reliability level associated with the chance constraint was decreased, the upper bound of the green roof area did not vary much for either shingle or metal roofs. The lower bound was found to decrease in the same situation, however, due to the higher minimum cost of the cistern in relation to the greater volume of expected rainfall, forcing the required green roof area to decrease.     

An assessment of toxicity in profundal lake sediment due to deposition of heavy metals and persistent organic pollutants from the atmosphere

A Tier I Sediment Ecological Risk Assessment of profundal lake sediment contaminated by diffuse pollution of heavy metals and POPs deposited from the atmosphere was completed. The concentrations of seven heavy metals and four groups of POPs (OCs, PCBs, PAHs, PBDEs) were determined in the profundal sediment of ten lakes in the United Kingdom and two sediment toxicity tests completed (chironomid survival and emergence and cladoceran survival and reproduction). The results showed that around half the lakes are at least moderately contaminated by Pb, Zn, Cd, As and PAHs deposited from the atmosphere and the toxicity quotient suggests that the contaminants of concern are Pb, As and PAHs, and not the other metals nor OCs and PCBs. There was toxicity in the sediment of four of the lakes. The Probable Effect Concentration Quotient values indicated that metals in the sediments of Scoat Tarn, Agden Reservoir and Llyn Llagi were likely to be responsible for the laboratory toxicity found in these lakes, with PAHs also contributing in Agden Reservoir.     

Uncertainties related to the identification of the marginal energy technology in consequential life cycle assessments

When performing life cycle assessment (LCA) assumptions regarding the energy use are often decisive for the outcome. In this paper, current approaches of identifying marginal electricity and heat technologies for consequential LCAs are challenged. The identification of marginal energy technologies is examined from three angles: The marginal electricity technology is identified in Danish historical and potential future energy systems. The methods of identifying and using marginal electricity and heat technologies in key LCA studies are analysed. Finally, the differences in applying energy system analysis and assuming one marginal technology are illustrated, using waste incineration with energy substitution as a case. The main problem with the current approach is the use of one single marginal technology. It is recommended to use fundamentally different affected technologies and identify these in several possible and fundamentally different future scenarios. If possible, the affected technologies should also be identified based on energy system analyses considering the technical characteristics of the technologies involved. Some results in this paper may be applicable to other affected technologies than energy.