Conventional, microwave, and ultrasound sequential extractions for the fractionation of metals in sediments within the Petrochemical Industry, Serbia

In this paper, the main objective was fractionation of Cd, Cu, Ni, Pb, Zn, Ca, Fe, and K in certificate material and sediment samples gathered from and around the Petrochemical Industry using the conventional, microwave and ultrasonic sequential extraction. Microwave oven and ultrasound bath were used as an energy source for achieving faster extraction. Additional heating and boiling of samples were avoided by using lower power and shorter time for microwave and ultrasound extraction. Precision and accuracy of procedure were evaluated by using certificate material (BCR701). Acceptable accuracy of metals (87.0–111.3 %) was achieved for all three-step sequential of conventional extraction protocol. An accuracy of the fourth step has been verified with two certificate materials: BCR143R and 146R. The range of total extracted metal concentrations from sediments was similar for all three extraction techniques. A significant high percentage of Cd, Cu, and Zn were obtained after extraction of the exchangeable and acid soluble sediment fraction. Principal component analysis of values obtained after determination of risk assessment code using conventional and ultrasound sequential extraction show similarity of these values. Accuracy, recovery, and risk assessment code values imply that ultrasound sequential extraction is a more suitable, accelerated sequential extraction procedure (30 min per extraction step) than microwave extraction in applied conditions.     

Trends in seasonal precipitation and temperature in Slovenia during 1951–2007

A quality-controlled and enhanced database of 38 temperature and 52 precipitation stations was developed for Slovenia, a transitional area between Mediterranean, Alpine and continental climatic regimes, covering the period 1951–2007. Mean annual temperatures significantly increased in nearly all of Slovenia (except western areas) at rates between 0.15 and 0.36 °C/decade. Warming was most intense strongest in summer and spring in north-eastern Slovenia (0.3–0.4 °C/decade) and weakest in autumn. Precipitation trends were heterogeneous. Annual precipitation decreased significantly in the north-western part, at 3–6 % per decade. During spring and summer, decrease in rainfall by 3–6 % was detected in western Slovenia. No significant trends were found for the autumn season. In winter, precipitation decreased, by 3–12 % per decade, in particular in north-western Slovenia. As observed also elsewhere in Central Europe, changes in large-scale atmospheric circulation patterns may have contributed to the observed long-term warming and drying in Slovenia. However, the strong warming in summer and spring, that is almost twice the trend observed in neighbouring countries, could be enhanced by drier soils caused by the decrease in winter precipitation in Slovenia.     

Relevance of biotic parameters in the assessment of the spatial distribution of gastrointestinal metal and protein levels during spawning period of European chub (Squalius cephalus L.)

The present field study, conducted during the spawning period (April/May) of European chub (Squalius cephalus L.) from the Sava River in Croatia, indicates that seasonal changes of fish physiological state might cause variability in gastrointestinal metal (Cd, Cu, Fe, Mn and Zn), total cytosolic protein and metallothionein (MT) levels. During the period of fish spawning and increased metabolic activity, a significant relationship with chub hepatosomatic index was evident for Fe and Mn in gastrointestinal tissue (r?=?0.35 and 0.26, respectively) and in cytosolic fraction (r?=?0.32 and 0.41, respectively) and for Zn and Fe in the gut content (r?=?0.36 and 0.31, respectively). Total cytosolic protein and MT concentrations followed the same spatial distribution as Fe and Mn in all gastrointestinal fractions and as Zn in the sub-cellular fractions, with higher levels at upstream locations. Due to the role of essential metals in metabolic processes and gonad development, increased feeding and spawning activity in April/May resulted in higher gastrointestinal essential metal (Fe, Mn and Zn) and MT concentrations, which probably follow an increase in Zn concentrations, known as the primary MT inducer. Therefore, biotic factors should be considered as important confounding factors in metal exposure assessment, while their influence on gastrointestinal metal and protein levels should be interpreted depending on the season studied.     

Distribution of Co,Cu, Fe,Mn, Se,Zn, and Cd among cytosolic proteins of different molecular masses in gills of European chub (Squalius cephalus L.)

The distribution of essential elements Co, Cu, Fe, Mn, Se, and Zn, and nonessential element Cd among cytosolic proteins of different molecular masses in the gills of European chub (Squalius cephalus) sampled in the moderately contaminated Sutla River in September of 2009, was studied after the protein separation by size exclusion high-performance liquid chromatography (SEC-HPLC), and the metal determination in the obtained fractions by high-resolution inductively coupled plasma mass spectrometry (HR ICP-MS). The aims of the study were to characterize the distribution profiles of metals within different protein categories in gills in the conditions of low metal exposure in the river water, and to compare them with the previously published hepatic profiles. The distribution profiles of analyzed metals were mainly characterized with several peaks. However, some observations could be emphasized: both Cu and Cd were eluted near metallothionein elution time; elution time of one of Co peaks could be associated with Co-containing compound cobalamin; increasing cytosolic Fe concentrations resulted in possible Fe binding to storage protein ferritin; both Mn and Zn had poorly resolved peaks covering wide ranges of molecular masses and indicating their binding to various proteins; both Zn and Se increased in protein fractions of molecular masses <5 kDa following their concentration increase in the gill cytosol; expected clear metallothionein peak was not observed for Zn. Comparison of gill profiles with previously published hepatic profiles revealed similar and in case of some elements (e.g., Co, Fe, Mn, and Se) almost identical distributions in both organs regarding elution times. On the contrary, heights of obtained peaks were different, indicating possible metal binding to the same proteins in the gills and liver, but in different proportions. The results obtained in this study can be used as a basis for comparison in monitoring studies, for identification of changes that would occur after exposure of chub to increased metal concentrations.     

The fate and importance of organics in drinking water treatment: a review

In the pioneer days, the main driving forces for research of organics in drinking water treatment (DWT) were human health risks and optimisation of technology. The focus was on natural organic matter (NOM) structure, disinfection by-products (DBPs) formation, NOM removal by means of coagulation, adsorption, and oxidation, and development of the most efficient water treatment trains. Surprisingly, after decades of research, rapid development of analytical techniques and progress in risk assessment, the same driving forces are still in the limelight — although the topics have changed slightly. The attention switched from trihalomethanes to a new generation of DBPs. The definition of hydrophilic/hydrophobic NOM depends on the technique used for characterisation. It has become evident that numerous organic compounds can threaten water supply sources. Some of them had been ignored or overlooked in the past, but have recently been detected by advanced analytical tools even in drinking water. Prioritisation becomes priority per se. As far as processes are concerned, mainstream research has been following three lines: fouling mechanisms, application of hybrid processes and interactions between synthetic organic chemicals, other water constituents and materials used in DWT. Significant development has been made in membrane technology. This paper presents a broad overview of the recent organics research. Although the state-of-the-art technologies seem to have an answer to each and every question raised, it is still necessary to deal with specific problems on a case-by-case basis mainly due to the unique nature of NOM and different xenobiotics that may appear in various types of waters. In the end, human health risk, which derives from the presence/absence of organics, is only the tip of the iceberg — underneath lies a whole new universe — the socio-economic aspect of water treatment and quality that deserves much more attention.     

Predictive modeling of sorption and desorption of a reactive azo dye by pumpkin husk

The use of effective disposal of redundant pumpkin husk (PH) to remove pollutants is an important issue for environmental protection and utilization of resource. The aim of this study was to remove a potentially toxic reactive azo dye, Reactive Red (RR) 120, by widespread PH as a low-cost adsorbent. Particle size, adsorbent dose, pH, temperature, initial dye concentration, and contact time affected the sorption process. Amine, amide, hydroxyl, and carboxyl groups of PH played significant roles on the sorption process. Rapid sorption occurred within the first 2 min and equilibrium was reached within 60 min. Sorption kinetic was well represented by logistic equation. Generated secondary logistic model can be used to describe effects of initial dye concentration, contact time, and temperature by a single equation with high R ² value. Monolayer sorption capacity was found as 98.61 mg g^-1. Activation energy, thermodynamic, and desorption studies showed that this process was physical, endothermic, and spontaneous. This study indicated that redundant PH as a low-cost adsorbent had a great potential for the removal of RR 120 as an alternative eco-friendly process.     

Antifungal efficiency assessment of the TiO2 coating on façade paints

The work studies the photocatalytic activity and the antifungal efficiency of the TiO₂/Zn-Al coatings placed on the target commercial façade paints. The photocatalytic active nanocomposite based on TiO₂ and Zn-Al-layered double hydroxides (ZnAl-LDHs) was synthesized by a wet impregnation technique with 3 % w/w TiO₂. The freshly prepared suspension was applied by spray technique on the surfaces of the white façade paints. The goal of the work was to develop a method that quickly quantifies the antifungal activity of the commercial façade paints with and without biocidal components covered with a photocatalytic coating. The essence of the proposed method is the monitoring of the fungal growth (artificial ageing conditions) and the quantification of its development (UV-A 0.13 mWcm^?2) on the façade paint surfaces. A special fungus nutrient (potato dextrose agar (PDA)) was inoculated with the spores of the Aspergillus niger ATCC 6275, and the test samples (façade paints with and without photocatalytic coating) were placed on the inoculated nutrient in the petri dishes. The images of the fungal growth on the samples of the facade paints, during a period of 5 days, were imported into Matlab R2012a where they were converted to binary images (BW), based on the adequate threshold. The percentage of the surface coverage was calculated by applying the specifically written program code which determines the ratio of the black and white pixels. The black pixels correspond to the surface covered with hyphae and mycelia of the fungus.     

Organochlorine pesticides and polychlorinated biphenyls in surface soils of Novi Sad and bank sediment of the Danube River

The contents of 16 organochlorine pesticides (OCPs) and six so-called indicator polychlorinated biphenyls (PCBs) were determined in the surface zone (0–5 cm) of soil and sediment samples, taken from different locations in the city of Novi Sad, capitol of Vojvodina Province (North of the Serbia) covering residential and commercial area, recreational and arable zone. The total organochlorine pesticides concentration in soil varied from 2.63 to 31.78 ng g^?1 dry weight, while the level in sediment was 10.35 ng g^?1 dry weight. Maximum content of identified individual organochlorine pesticide in soil samples was 10.40 ng g^?1 dry weight for p, p-DDE in the market garden and 6.31 ng g^?1 dry weight for p, p'-DDT in sediment of the Danube River, although their application is restricted in Serbia. Some of investigated PCBs were identified only in the soil samples from a park-school backyard in the city downtown (0.32 ng g^?1 dry weight) and market garden (0.22 ng g^?1 dry weight), and also in sediment sample from left bank of the Danube River (0.41 ng g^?1 dry weight). Data of the OCPs and PCBs present in this study were compared with the ones found for soils and river sediments throughout the world, and with limit values set by soil and sediment quality guidelines. Also, correlation between the levels of certain pesticides and soil characteristics (organic matter, pH and clay content) was investigated.     

Distribution and accumulation of elements (As, Cu, Fe, Hg, Mn, and Zn) in tissues of fish species from different trophic levels in the Danube River at the confluence with the Sava River (Serbia)

Pikeperch (Sander lucioperca), European catfish (Silurus glanis), common carp (Cyprinus carpio), and gobies (Neogobius gymnotrachelus, Neogobius melanostomus) were collected from the Danube River (Belgrade section), and samples of liver, muscle, or whole-body composites (in the case of gobies) were analyzed for As, Cu, Fe, Hg, Mn, and Zn with inductively coupled plasma optical spectrometry to find out if there was a correlation between accumulation of these elements in predatory and prey species, as well as in pairs of species with overlapping diets. Concentrations of all analyzed elements were either higher (Cu, Fe, Mn, Zn) in liver than in muscle, or equal (As, Hg), except for Hg in carp, which was higher in muscle. Mercury concentration in liver and muscle of predators (catfish, pikeperch) was significantly (<10^?4) higher than in prey fishes (carp and gobies). The results indicate that Hg concentration was biomagnified through the food chain. Concentrations of As, Fe, and Hg in carp liver and gobies whole-body composite were similar, but carp had significantly (<10^?4) higher values of Zn and Cu in liver. The regression analysis and trendline equations indicate that the concentrations of all tested elements, except for As in liver, and Mn and Fe in muscle, were similar in predatory fish (pikeperch and catfish), on one hand, and in prey fish (carp and gobies), on the other hand. Distinctly high Zn concentration in carp is very common in this species due to its physiology. Concentrations of Hg and Zn were higher than the maximum acceptable concentration due to the high pollution level in this section of the Danube River, accordingly posing a risk for the human consumption of these fish species.     

Changes of metal-induced toxicity by H2O2/NO modulators in Scenedesmus quadricauda (Chlorophyceae)

Effect of nitric oxide donor (sodium nitroprusside, SNP, 500 μM) or hydrogen peroxide scavenger (dithiothreitol, DTT, 500 μM) on cadmium (Cd) or copper (Cu) uptake (150 μM solutions) and toxicity using Scenedesmus quadricauda was studied. Combined treatments (Cd or Cu + DTT or SNP) usually ameliorated metal-induced toxicity at the level of pigments, proteins, and mineral nutrients in comparison with respective metal alone. Viability tests (MTT and TTC) showed the lowest values preferentially in Cu treatments, indicating higher toxicity in comparison with Cd. Cd showed low impact on amino acids while strong Cu-induced depletion was mitigated by DTT and SNP. Amount of ROS and NO showed the most pronounced responses in SNP variants being rather reciprocal than parallel and regulated ascorbate peroxidase activity. Blot gel analyses of hsp70 protein did not reveal extensive changes after given exposure period. Phenols were elevated by DTT alone while all Cu treatments revealed depletion. Total Cu content decreased while total Cd content increased in metal + SNP or metal + DTT. Subsequent experiment using lower Cd, SNP or DTT doses (10 and 100 μM) revealed concentration-dependent impact on Cd uptake. Overall, DTT was found to be more suitable for the amelioration of metal-induced toxicity.