Comparison of fenton and photo-fenton processes for livestock wastewater treatment

In this study, the photochemical degradation of livestock wastewater was carried out by the Fenton and Photo-Fenton processes. The effects of pH, reaction time, the molar ratio of Fe(2 +)/H(2)O(2), and the Fe(2 +) dose were studied. The optimal conditions for the Fenton and Photo-Fenton processes were found to be at a pH of 4 and 5, an Fe(2 +) dose of 0.066 M and 0.01 M, a concentration of hydrogen peroxide of 0.2 M and 0.1 M, and a molar ratio (Fe(2 +)/H(2)O(2)) of 0.33 and 0.1, respectively. The optimal reaction times in the Fenton and Photo-Fenton processes were 60 min and 80 min, respectively. Under the optimal conditions of the Fenton and Photo-Fenton processes, the chemical oxygen demand (COD), color, and fecal coliform removal efficiencies were approximately 70--79, 70--85 and 96.0--99.4%, respectively.     

Microbial PCB dechlorination in dredged sediments and the effect of moisture

Evidence of reductive dechlorination of polychlorinated biphenyls (PCBs) in sediments was investigated in Hudson River sediments dredged and encapsulated in 1978 at Moreau, NY. The effect of different moisture contents in dredged sediments on dechlorination and dechlorinating microorganisms was also determined using PCB-spiked sediments in which the moisture level was adjusted by simulating a dewatering process. The congener pattern of PCBs indicated that the dechlorination in the dredged sediments was far less advanced than that in the river sediments collected from the general area of the dredged site (Ft. Edward site). Dechlorination in encapsulated sediments at the Moreau site appeared to have stopped soon after dredging. When microorganisms eluted from the encapsulated sediments were inoculated in clean sediments spiked with Aroclor 1242, an extensive dechlorination was observed, indicating that the encapsulated sediments still harbored dechlorinating microorganisms. However, the same inoculum failed to further dechlorinate residual congeners in the dredged sediments. On the other hand, an inoculum obtained in 1990 from the dredged site in the Hudson River dechlorinated the residual congeners further. In simulated dredged sediments, the maximum level of dechlorination was lower at reduced moisture contents. The population size of dechlorinating microorganisms, as determined by the most probable number (MPN) technique, was also smaller at the lower moisture levels. There was a significant correlation between the maximum extent of dechlorination and the specific death rate of dechlorinating populations. These results indicate that the underlying mechanism of the moisture-dependent maximum dechlorination is the moisture-dependence of the death rate of dechlorinating microorganisms.     

Removal of organic and nitrogen and molecular weight distribution of residual soluble organic from entrapped mixed microbial cells and activated sludge processes.

The simultaneous removal of organic and nitrogen and molecular weight distribution (MWD) of residual soluble chemical oxygen demand (RSCOD) in final effluent were investigated using entrapped mixed microbial cells (EMMC) and conventional activated sludge processes. Two different types of processes using EMMC carriers demonstrated better organic and nitrogen removal performance because of the high solids retention time (SRT) compared with the activated sludge process. Regarding the RSCOD, the longer SRT process (EMMC) was affected by reducing the hydraulic retention time, resulting in the increase of high-molecular-weight materials. On the other hand, reducing the aeration period had significantly affected the MWD in the shorter SRT process (activated sludge), resulting in an increase of low-molecular-weight materials.     

Cost-effective monitoring for a soil vapor extraction (SVE) system: a simplified modeling and gas sensor test

In order to establish cost-effective monitoring strategies for soil vapor extraction (SVE), a simplified model for multi-component mass transfer of a complex liquid mixture in porous media and gas sensor are proposed and experimentally evaluated. The basic task for the cost-effective monitoring of SVE is to decide how to predict the performances of venting systems in terms of the contaminant vapor removal rate and the time required to accomplish the clean-up specification. The method includes classifying of individual components of a complex mixture on the basis of gas chromatographic (GC) profile and treating each resulting group as a pseudo-single compound. BTEX components of gasoline were selected for model input and the remainders were divided into 4 groups based on their GC retention times. The model proposed in this study is capable of predicting with accuracy volatilization behaviors of gasoline components in soil and the gas sensor (FIGARO TGS 823) was tested by GC-FID to toluene and TPH-GRO(Total Petroleum Hydrocarbon-Gasoline Range Organics) gas samples. A VOC gas sensor was developed which recognizes TPH-GRO concentrations between 250 and 50 ppm. The developed gas sensor test and proposed model can be used as a valuable tool for the cost-effective monitoring for SVE systems.     

Incomplete oxidation of ethylenediaminetetraacetic acid in chemical oxygen demand analysis.

Ethylenediaminetetraacetic acid (EDTA) was found to incompletely oxidize in chemical oxygen demand (COD) analysis, leading to incorrect COD values for water samples containing relatively large amounts of EDTA. The degree of oxidation depended on the oxidant used, its concentration, and the length of digestion. The COD concentrations measured using COD vials with a potassium dichromate concentration of 0.10 N (after dilution by sample and sulfuric acid) were near theoretical oxygen demand values. However, COD measured with dichromate concentrations of 0.010 N and 0.0022 N were 30 to 40% lower than theoretical oxygen demand values. Similarly, lower COD values were observed with manganic sulfate as oxidant at 0.011 N. Extended digestion yielded somewhat higher COD values, suggesting incomplete and slower oxidation of EDTA, as a result of lower oxidant concentrations. For wastewater in which EDTA is a large fraction of COD, accurate COD measurement may not be achieved with methods using dichromate concentrations less than 0.1 N.     

Comparison of seven indicator PCBs and three coplanar PCBs in beef, pork, and chicken fat

The risk assessment of polychlorinated biphenyls (PCBs) is difficult since complex congeners were used in many industrial applications for a long period of time and the residue monitoring in foods of animal origin and the environment were not established in comparable systems. The relationships of determined concentrations in indicator PCB congeners (mono- and di-ortho PCBs) and coplanar PCB congeners (non-ortho PCBs) in livestock products are presented in this study. The concentrations of seven indicator PCBs were compared with three coplanar PCBs in beef, pork, and chicken fat. Distributions of concentration for the indicator PCBs in three different animal species were similar except for that of PCB-118 (2,3',4,4',5-pentachlorobiphenyl) in pork fat. The congeners with the highest concentration were PCB-138 (2,2',3,4,4',5'-hexachlorobiphenyl) in beef and pork fat and PCB-28 (2,4,4'-trichlorobiphenyl) in chicken fat. The bioaccumulation and metabolism of PCBs in animal species represent different congener profiles in livestock products. The percentage of the total concentration of three coplanar PCBs was about 2% of the total concentration of the seven indicator PCBs. Relatively high concentration of mono-ortho and di-ortho PCBs in fat samples of livestock products may be calculated with the concentration of coplanar PCBs that can be usually determined on a sequential procedure with dioxin analysis. Therefore, the relationship of the amounts between seven indicator PCBs and three coplanar PCBs may be useful to derive the composition and level of contaminants in beef, pork, and chicken.     

Heavy contamination of a subsurface aquifer and a stream by livestock wastewater in a stock farming area, Wonju, Korea

A survey of groundwater and stream water quality was undertaken in a stock farming area where livestock wastewater infiltrates into sandy unsaturated zones and saturated bedrock aquifers containing fractures. To determine the degree of contamination and track the effect of livestock wastewater on groundwater and stream water quality, the population of indicator bacteria (total coliforms, fecal coliforms, fecal streptococci, Staphylococcus spp., and sulfite-reducing clostridia) together with relevant physicochemical parameters were monitored along the wastewater flow-pathways over a 19-month period. The stream water was severely contaminated with livestock wastewater. Nearly all physicochemical and bacteriological parameters in the stream water were much greater than those in the groundwater. Nitrate-N concentrations ranged from 10.0 to 20.0 mg l(-1) in boreholes located downstream (site C) from the livestock waste disposal site, while those in the background borehole (W2) were below 1.0 mg l(-1). Densities of indicator bacteria in boreholes at site C were two or three orders of magnitude higher than those in W2 borehole. In boreholes located downstream from the livestock waste disposal site, the concentration of ammonium-N, nitrate-N, and pollution indicator bacteria increased as groundwater level rose due to infiltration of rainwater. In W2 borehole, however, physicochemical parameters and the number of pollution indicator bacteria had no correlation with the groundwater level. Collectively, these results suggest that the deep aquifers were heavily contaminated with infiltrated livestock wastewater, which consequently must be adequately treated to minimize groundwater pollution.     

Industrial processes and waste characterization

Specific industrial processes and its waste characteristics should be known for proper management and control of the wastes produced from industries. Some industrial processes and waste characteristics are introduced to explain how to deal with the wastes for waste characterization. Evaluation methods of biodegradability of industrial wastewater were introduced in order for environmental engineers to be able to decide the proper treatment method of the industrial wastewaters. Industrial processes and characterization discussed in this section might be useful for the selection of suitable methods to prevent pollutant discharge from industrial processes.     

Short-term influence of phosphate and nitrate on heavy metal accumulation by red alga Acrosorium uncinatum

Heavy metal accumulation (Cu, Zn, Ni, and Pb) in common marine macroalga, Acrosorium uncinatum under nutrient (phosphate and nitrate) enriched (experiment 1) and starved (experiment 2) conditions over a short exposure period (12 h) were examined in this study. Control was maintained in seawater contained nutrient solution without addition of metals and in seawater alone for experiment 1 and 2, respectively. Among the four metals studied, the accumulation of Zn, Ni, and Pb was considerably lower than Cu. The accumulation factor for all metals varies greatly in different nutrient concentrations, but it increases as the exposure of metal concentration decreases in both the experiments. The results of the present findings established that this macroalga is an accumulator of metals Cu, Zn, Ni, and Pb and have the potential to accumulate these metals even in a short time exposure period (12 h). Even though metal accumulation by A. uncinatum largely depends on the available concentration in the medium, nutrients like phosphate and nitrate can affect the accumulation significantly.