Use of Remote Sensing Techniques to Determine the Effects of Grazing on Vegetation Cover and Dune Elevation at Assateague Island National Seashore: Impact of Horses

The effects of grazing by feral horses on vegetation and dune topography at Assateague Island National Seashore were investigated using color-infrared imagery, lidar surveys, and field measurements. Five pairs of fenced and unfenced plots (300 m²) established in 1993 on sand flats and small dunes with similar elevation, topography, and vegetation cover were used for this study. Color-infrared imagery from 1998 and field measurements from 2001 indicated that there was a significant difference in vegetation cover between the fenced and unfenced plot-pairs over the study period. Fenced plots contained a higher percentage of vegetation cover that was dominated by American beachgrass (Ammophila breviligulata). Lidar surveys from 1997, 1999, and 2000 showed that there were significant differences in elevation and topography between fenced and unfenced plot-pairs. Fenced plots were, on average, 0.63 m higher than unfenced plots, whereas unfenced plots had generally decreased in elevation after establishment in 1993. Results demonstrate that feral horse grazing has had a significant impact on dune formation and has contributed to the erosion of dunes at Assateague Island. The findings suggest that unless the size of the feral horse population is reduced, grazing will continue to foster unnaturally high rates of dune erosion into the future. In order to maintain the natural processes that historically occurred on barrier islands, much larger fenced exclosures would be required to prevent horse grazing.     

A Quantitative Safety Assessment Model For Transgenic Protein Products Produced In Agricultural Crops

Transgenic plants are now being used to develop pharmaceutical and industrial products in addition to their use in crop improvement. Using confinement requirements, these transgenic plants are grown and processed under conditions that prevent intermixing with commodity crops. Regulatory agencies in the United States have provided guidance of zero tolerance of these new industrial crops with commodity crops. While this is a worthy goal, it is theoretically unattainable. In spite of the best containment practices, there is a potential risk using any system of production due to unforeseen incidences including natural disasters or exposure to workers. The precautionary principle has been used for numerous regulated articles in addressing the potential risks of new products and technology based on a risk assessment in similar situations. We present here a risk assessment model that could be used as a start to develop an accepted model for the industry. The model is based on current risk models used for other regulated articles, but adapted for these types of products. This could be used to determine action levels in the event of an unintended exposure or to ensure that detection or confinement methods are adequate to avoid risks. As an example, aprotinin, a therapeutic protein now being produced in maize, was evaluated for potential risk to humans using this model.     

Influence of organic loading on an anaerobic sequencing biofilm batch reactor (ASBBR) as a function of cycle period and wastewater concentration

The effect of organic loading on the performance of a mechanically stirred anaerobic sequencing biofilm batch reactor (ASBBR) has been investigated, by varying influent concentration and cycle period. For microbial immobilization 1-cm polyurethane foam cubes were used. An agitation rate of 500 rpm and temperature of 30+/-2 degrees C were employed. Organic loading rates (OLR) of 1.5-6.0gCODl(-1)d(-1) were applied to the 6.3-l reactor treating 2.0 l synthetic wastewater in 8 and 12-h batches and at concentrations of 500-2000mgCODl(-1), making it possible to analyze the effect of these two operation variables for the same organic loading range. Microbial immobilization on inert support maintained approximately 60 gTVS in the reactor. Filtered sample organic COD removal efficiencies ranged from 73 to 88% for organic loading up to 5.4gCODl(-1)d(-1). For higher organic loading (influent concentration of 2000mgCODl(-1) and 8-h cycle) the system presented total volatile acids accumulation, which reduced organics removal efficiency down to 55%. In this way, ASBBR with immobilized biomass was shown to be efficient for organic removal at organic loading rates of up to 5.4gCODl(-1)d(-1) and to be more stable to organic loading variations for 12-h cycles. This reactor might be an alternative to intermittent systems as it possesses greater operational flexibility. It might also be an alternative to batch systems suspended with microorganisms since it eliminates both the uncertainties regarding granulation and the time necessary for biomass sedimentation, hence reducing the total cycle period.     

Environmental assessment of supercritical water oxidation of sewage sludge

Environmental aspects of using supercritical water oxidation (SCWO) to treat sewage sludge were studied using a life cycle assessment (LCA) methodology. The system studied is the first commercial scale SCWO plant for sewage sludge in the world, treating sludge from the municipal wastewater treatment facility in Harlingen, TX, USA. The environmental impacts were evaluated using three specific environmental attributes: global warming potential (GWP), photo-oxidant creation potential (POCP) and resource depletion; as well as two single point indicators: EPS2000 and EcoIndicator99. The LCA results show that for the described process, gas-fired preheating of the sludge is the major contributor to environmental impacts, and emissions from generating electricity for pumping and for oxygen production are also important. Overall, SCWO processing of undigested sewage sludge is an environmentally attractive technology, particularly when heat is recovered from the process. Energy-conserving measures and recovery of excess oxygen from the SCWO process should be considered for improving the sustainability potential.     

Denitrification in a coastal plain riparian zone contiguous to a heavily loaded swine wastewater spray field

Riparian zones are recognized as landscape features that buffer streams from pollutants, particularly nitrogen. The objectives of this experiment were to (i) assess denitrification activity within a riparian zone and (ii) determine the influence of physical, chemical, and landscape features on denitrification. This experiment was conducted from 1994 to 1997 in North Carolina on a riparian zone contiguous to a spray field that was heavily loaded with swine lagoon wastewater. Denitrification enzyme activity (DEA) was measured on soils collected from (i) the soil surface, (ii) midway between the soil surface and water table, and (iii) above the water table. The DEA ranged from 3 to 1660 microg N(2)O-N kg(-1) soil h(-1). The DEA was highest next to the stream and lowest next to the spray field. Nitrate was found to be the limiting factor for denitrification. The DEA generally decreased with soil depth; means for the surface, middle, and bottom depths were 147, 83, and 67 microg N(2)O-N kg(-1) soil h(-1), respectively. These DEA values are higher than those reported for riparian zones adjoining cropland of the southeastern United States, but are lower than those reported for a constructed wetland used for treatment of swine wastewater. Regression analysis indicated that soil total nitrogen was the highest single factor correlated to DEA (r(2) = 0.65). The inclusion of water table depth, soil depth, and distance from the spray field improved the R(2) to 0.86. This riparian zone possessed sufficient soil area with high denitrifying conditions to be a significant factor in the removal of excess nitrogen in the ground water.     

Simulating urban waste compost effects on carbon and nitrogen dynamics using a biochemical index

Composting has emerged as a valuable route for the disposal of urban waste, with the prospect of applying composts on arable fields as organic amendments. Proper management of urban waste composts (UWCs) requires a capacity to predict their effects on carbon and nitrogen dynamics in the field, an issue in which simulation models are expected to play a prominent role. However, the parameterization of soil organic amendments within such models generally requires laboratory incubation data. Here, we evaluated the benefit of using a biochemical index based on Van Soest organic matter fractions to parameterize a deterministic model of soil C and N dynamics, NCSOIL, as compared with a standard alternative based on laboratory incubation data. The data included C mineralization and inorganic N dynamics in samples of a silt loam soil (Typic Hapludalf) mixed with various types of UWC and farmyard manure. NCSOIL successfully predicted the various nitrogen mineralization-immobilization patterns observed, but underestimated CO(2) release by 10 to 30% with the less stable amendments. The parameterization based on the biochemical index achieved a prediction error significantly larger than the standard parameterization in only 10% of the tested cases, and provided an acceptable fit to experimental data. The decomposition rates and C to N ratios of compost organic matter varied chiefly according to the type of waste processed. However, 62 to 66% of their variance could be explained by the biochemical index. We thus suggest using the latter to parameterize organic amendments in C and N models as a substitute for time-consuming laboratory incubations.     

Interrelationship of macropores and subsurface drainage for conservative tracer and pesticide transport

Macropore flow results in the rapid movement of pesticides to subsurface drains, which may be caused in part by a small portion of macropores directly connected to drains. However, current models fail to account for this direct connection. This research investigated the interrelationship between macropore flow and subsurface drainage on conservative solute and pesticide transport using the Root Zone Water Quality Model (RZWQM). Potassium bromide tracer and isoxaflutole, the active ingredient in BALANCE herbicide [(5-cyclopropyl-4-isoxazolyl) [2(methylsulfonyl)-4-(trifluoromethyl)phenyl] methanone], with average half-life of 1.7 d were applied to a 30.4-ha Indiana corn (Zea mays L.) field. Water flow and chemical concentrations emanating from the drains were measured from two samplers. Model predictions of drain flow after minimal calibration reasonably matched observations (slope = 1.03, intercept = 0.01, and R(2) = 0.75). Without direct hydraulic connection of macropores to drains, RZWQM under predicted bromide and isoxaflutole concentration during the first measured peak after application (e.g., observed isoxaflutole concentration was between 1.2 and 1.4 mug L(-1), RZWQM concentration was 0.1 mug L(-1)). This research modified RZWQM to include an express fraction relating the percentage of macropores in direct hydraulic connection to drains. The modified model captured the first measured peak in bromide and isoxaflutole concentrations using an express fraction of 2% (e.g., simulated isoxaflutole concentration increased to 1.7 mug L(-1)). The RZWQM modified to include a macropore express fraction more accurately simulates chemical movement through macropores to subsurface drains. An express fraction is required to match peak concentrations in subsurface drains shortly after chemical applications.     

Application of a slow-release fertilizer for oil bioremediation in beach sediment

A 105-d field experiment was conducted to determine the potential of the slow-release fertilizer, Osmocote (Scotts, Marysville, OH), to stimulate the indigenous microbial biodegradation of petroleum hydrocarbons in an oil-spiked beach sediment on an intertidal foreshore in Singapore. Triplicate microcosms containing 80 kg of weathered sediment, spiked with 5% (w/w) Arabian light crude oil and 1.2% (w/w) Osmocote pellets, were established, together with control microcosms minus Osmocote. Relative to the control, the presence of the Osmocote sustained a significantly higher level of nutrients (NH(4)(+)-N, NO(3)(-)-N, and PO(4)(3-)-P) in the sediment pore water over the duration of the experiment. The metabolic activity of the indigenous microbial biomass, as measured using an intracellular dehydrogenase enzyme assay, was also significantly enhanced over the duration of the experiment in amended sediments. The loss of total recoverable petroleum hydrocarbons (TRPH) and biodegradation of total n-alkanes (C(10)-C(33)), branched alkanes (pristane and phytane), as well as total target polycyclic aromatic hydrocarbons (PAHs) (two- to six-ring), in both the control and Osmocote-amended sediments, followed a first-order biodegradation model. The first-order loss rate of total recoverable petroleum hydrocarbons was 2.57 times greater than that of the control. The hopane-normalized rate constants for total n-alkane, branched alkane, and total target PAH biodegradation in the Osmocote-treated sediments were 3.95-, 5.50-, and 2.45-fold higher than the control, respectively. Overall, the presence of Osmocote was able to significantly enhance and accelerate the biodegradation of aliphatics and PAHs in oil-contaminated sediments under natural field conditions in an intertidal foreshore environment.     

Hybrid poplar and forest soil response to municipal and industrial by-products: a greenhouse study

Little research has been conducted in the Lake States (Minnesota, Wisconsin, and Michigan) to evaluate the effects of municipal and industrial by-product applications on the early growth of short rotation woody crops such as hybrid poplar. Anticipated shortages of harvestable-age aspen in the next decade can be alleviated and rural development can be enhanced through the application of by-products to forest soils. This study was conducted to evaluate the effects of inorganic fertilizer, boiler ash, biosolids, and the co-application of ash and biosolids application on tree growth and soil properties by measuring hybrid poplar clone NM-6 (Populus nigra L. x P. maximowiczii A. Henry) yield, nutrient uptake, and select post-harvest soil properties after 15 wk of greenhouse growth. Treatments included a control of no amendment; agricultural lime; inorganic N, P, and K; three types of boiler ash; biosolids application rates equivalent to 70, 140, 210, and 280 kg available N ha(-1); and boiler ash co-applied with biosolids. All of the by-products treatments showed biomass production that was equal to or greater than inorganic fertilizer and lime treatments. A trend of increased biomass with increasing rates of biosolids was observed. Soil P concentration increased with increasing rates of biosolids application. None of the by-products treatments resulted in plant tissue metal concentrations greater than metal concentrations of plant tissue amended with inorganic amendments. Biosolids, boiler ash, and the co-application of biosolids and boiler ash together on forest soils were as beneficial to plant growth as inorganic fertilizers.     

Nitrite formation and nitrous oxide emissions as affected by reclaimed effluent application

The effect of irrigation with reclaimed effluent (RE) (after secondary treatment) on the mechanisms and rates of nitrite formation, N2O emissions, and N mineralization is not well known. Grumosol (Chromoxerert) soil was incubated for 10 to 14 d with fresh water (FW) and RE treated with 15NO3- and 15NH4+ to provide a better insight on N transformations in RE-irrigated soil. Nitrite levels in RE-irrigated soil were one order of magnitude higher than in FW- irrigated soil and ranged between 15 to 30 mg N kg(-1) soil. Higher levels of NO2- were observed at a moisture content of 60% than at 70% and 40% w/w. Nitrite levels were also higher when RE was applied to a relatively dry Grumosol (20% w/w) than at subsequent applications of RE to soil at 40% w/w. Isotopic labeling indicated that the majority of NO2 was formed via nitrification. The amount of N2O emitted from RE-treated Grumosol was double the amount emitted from FW treatments at 60% w/w. Nitrification was responsible for about 42% of the emissions. The N20 emission from the RE-treated bulk soil (passing a 9.5-mm sieve) was more than double the amount formed in large aggregates (4.76-9.5 mm in diameter). No dinitrogen was detected under the experimental conditions. Results indicate that irrigation with secondary RE stimulates nitrification, which may enhance NO3 leaching losses. This could possibly be a consequence of long-term exposure of the nitrifier population to RE irrigation. Average gross nitrification rate estimates were 11.3 and 15.8 mg N kg(-1) soil d(-1) for FW- and RE-irrigated bulk soils, respectively. Average gross mineralization rate estimates were about 3 mg N kg(-1) soil d(-1) for the two water types.