Buffer zone widths for honeybees from ground and aerial spraying of insecticides

The relative field hazards of insecticides to honeybees have been estimated by considering intrinsic toxicity levels and field application rates. This approach is extended here to a consideration of buffer zones downwind of sprayed areas by estimating the distance at which bees would encounter an LD(50) dose from spray drift. 'LD(50) distances' are determined for both ground and aerial spraying of ground crops in Britain using published data on spray deposition under various weather conditions. For ground spraying at low wind speeds (< or =3 m s(-1)), this zone of risk is up to 5 m for the great majority of compounds. Aerial spraying in unstable atmospheric conditions appears to produce drift deposits of about the same order of magnitude as from ground spraying at wind speeds of about 4 m s(-1), with maximum LD(50) distances of < or =40 m for chlorpyrifos, fenitrothion and triazophos. For aerial spraying in stable atmospheric conditions these distances would be much greater. Pieris brassicae larvae are contrasted with honeybees in their relative sensitivities to insecticides and consequent LD(50) distances.     

Stage dependent susceptibility to lead in Bufo arenarum embryos

The stage dependent susceptibility to lead in amphibian development was studied by exposing Bufo arenarum embryos during neurulae, neuromuscular activity and gill circulation stages for twenty hours to 1 ppm Pb(2+). Survival, malformations and behavioral disorders were evaluated. The embryonic susceptibility to lead was markedly stage dependent. The survival at the neuromuscular activity stage was approximately half that of the other two periods; concerning malformations, the gill circulation stage was the least sensitive. The observed malformations consisted of failed closure of neural tube, hydropsy, small and cylindrical tails, reduced body size and incurvations in the body axis. Some alterations occurred in all experimental groups and therefore were considered non-dependent on the period of treatment. In all experimental embryos, neurological disorders such as trembles and loss of equilibrium were observed.     

Dioxins and furans in emissions from medical waste incinerators

Dioxins and furans were detected in emissions from eight medical waste incinerators tested in California. Total uncontrolled emissions ranged from 363 to 11, 811 nanograms per dry standard cubic meter. The most effective of three wet scrubbers achieved an emissions control efficiency of 95 percent for total PCDD and PCDF. A baghouse was less than 30 percent efficient in removing PCDD and PCDF from the incinerator emissions.     

Uptake from water, release and tissue distribution of 54Mn in the Rainbow trout (Oncorhynchus mikiss Walbaum)

As part of a research programme on the transfer of several radionuclides along a pelagic trophic chain, two groups of 12 trout were kept for 8 weeks in water contaminated with 30 Bq ml(-1) of (54)Mn. In order to simulate chronic contamination and limit alterations in the physical and chemical characteristics of the medium, the water was renewed every 2 days. The kinetics of the accumulation and elimination of the radionuclide were monitored in one group of fish. The second group was used to study the contamination of the main organs and tissues at the end of the accumulation phase. The dynamics of contamination can be described by a bi-compartmental model, taking into account the fluctuations in the concentration of (54)Mn in the water, as well as the biological dilution resulting from the growth of the fish. The theoretical value of the steady-state concentration factor for zero growth is 13 (w.w.) and the radionuclide release is characterised by two biological half-lives of 6 and 97 days. At the end of the accumulation phase, the (54)Mn is preferentially fixed in the bone, gills, skin and brain. The data obtained at the end of the depuration phase allow one to classify the organs in two groups with different elimination kinetics. The first group consists of organs of penetration or transit, such as the skin, gills, kidneys, liver, primary and secondary gut and viscera, whereas the second group is made up of the receptor and storage organs and tissues such as the bone, head, fins and muscle.     

Effects of degree of water saturation on dispersivity and immobile water in sandy soil columns

Three natural nonaggregated soil samples, with similar grain-size distributions, have been used to determine the dispersive behavior of porous media under steady, saturated and unsaturated flow conditions. Tritium was used as a tracer and was found to have no sorption on the solid matrix. Generated breakthrough curves (BTCs) for the unsaturated experiments were symmetrical with no evidence of tailing. The unsaturated experiments for two of the soils were adequately described by considering all the water in the pore volume as mobile. However, about 10% of the pore water, independent of the degree of saturation, was found to be immobile in the case of the third soil during unsaturated flow. For this soil, there was no mass transfer between the two water regions, indicating that the immobile water is essentially isolated from the flowing water fraction. For all three soils, dispersivity under unsaturated conditions was found to be higher, independent of the degree of water saturation, than the value determined for the saturated experiments. This is inconsistent with what would be expected from the simple bundle-of-capillary-tubes model and does not agree well with a more sophisticated conceptualization of the porous medium. The data, however, clearly indicate a wider range in pore-water velocities when these soils are desaturated.     

Three-fluid retention in porous media involving water, PCE and air

A classical way to obtain three-fluid retention curves in porous media from measured two-fluid retention curves is based on the Leverett concept, which states that the total volumetric liquid content in a water-wet porous medium, containing water, a nonaqueous-phase liquid (NAPL) and air, is a function of the capillary pressure across the interface between the continuous NAPL and air. This functional relationship results from the assumed condition that in a three-fluid porous medium, the intermediate wetting fluid spreads over the water-air interface. Application of Leverett's concept may not be valid, however, for nonspreading NAPLs like perchloroethylene (PCE). This paper discusses measurements of both PCE-air and water-PCE-air retention curves using a long vertical column in conjunction with a dual-energy gamma radiation system. The data indicate that the Leverett concept was applicable only until a critical PCE saturation had been reached.     

Development of a continuously stirred flow cell for investigating sorption mass transfer

This paper introduces a new reversible-flow design for a continuously stirred reactor used to study sorption mass transfer in soil and solvent systems. The stirred reactor has potential advantages over conventional packed column or batch reactors because it isolates intraparticle sorption rate limitations from advective-dispersive transport, yet allows changes to flux through the reactor for analysis of sorption kinetics under dynamic conditions. Previously, stirred reactors have often failed due to clogging of sediment on the effluent frit. The reverse-flow backwashing design allows longer life and higher confidence in maintaining mixed conditions than previous designs. Mass transfer 'rate coefficients estimated from stirred and column experiments are compared; both techniques produced results consistent with a published correlation. The data also show that fitted sorption mass transfer coefficients can be strongly dependent on the choice of equilibrium partition coefficient (i.e. batch or first-moment derived values), and that the conventional two-site sorption kinetics model fails to accurately predict sorption mass transfer in the presence of changing solvent velocity through the reactor.     

Intercomparison between TRIO-EF and IMPACT codes with reference to experimental strontium migration data

This work presents an intercomparison exercise between two geochemical migration codes, TRIO-EF (an object-oriented finite element code) and IMPACT (a chemical engineering code using mixing cells in series). The predictions of the two codes are compared with the reference experimental results obtained in a previous study of strontium transport in soil columns. This simulated geochemical system is well documented and includes ion exchange and dissolution-precipitation reactions. The solution transport is simulated by a one-dimensional advection-dispersion model. The predictions of TRIO-EF and IMPACT are both in good agreement with the experimental results. However, slight differences can be observed between the two codes, especially when concentration discontinuities are involved, such as precipitation fronts or changes in boundary conditions. These discrepancies between the two codes can mainly be attributed to the different discretisation approaches.     

Predicting change in fish mercury concentrations following reservoir impoundment

Fish mercury concentrations frequently increase after impoundment of a reservoir. Soil flooding releases organic matter and nutrients, providing food to bacterial communities that methylate inorganic mercury. Methylation and bioaccumulation are the primary pathways for mercury accumulation in fish. We investigated if changes in fish mercury concentrations could be predicted from the change in reservoir size. Data for three fish species, northern pike (Esox lucius), walleye (Stizostedion vitreum), and lake whitefish (Coregonus clupeaformis) from reservoirs in northern Manitoba and northern Quebec were used to evaluate four simple models of change in mercury with change in flooded area. For three additional fish species, all primary carnivores, the preferred model consisted of a single exponential enrichment term. This model successfully predicted two cases not used in model development-one with a large change in area and one with a small change in area. Models with good predictive skill can be developed when the underlying dynamics are known.