Archaeometric researches on the provenance of Mediterranean Archaic Phoenician and Punic pottery

The aim of this study is to setup a first chemical database that could represent the starting point for a reliable classification method to discriminate between Archaic Phoenician and Punic pottery on the base of their chemical data. This database up to now can discriminate between several different areas of production and provenance and can be applied also to unknown ceramic samples of comparable age and production areas. More than 100 ceramic fragments were involved in this research, coming from various archaeological sites having a crucial importance in the context of the Phoenician and Punic settlement in central and western Mediterranean: Carthage (Tunisia), Toscanos (South Andalusia, Spain), Sulci, Monte Sirai, Othoca, Tharros (Sardinia, Italy) and Pithecusa (Campania, Italy). Since long-time archaeologists hypothesised that Mediterranean Archaic Phoenician and Punic pottery had mainly a local or just a regional diffusion, with the exception of some particular class like transport amphorae. To verify the pottery provenance, statistical analyses were carried out to define the existence of different ceramic compositional groups characterised by a local origin or imported from other sites. The existing literature data are now supplemented by new archaeometric investigations both on Archaic Phoenician ceramics and clayey raw materials from Sardinia. Therefore, diffractometric analyses, optical microscopy observations and X-ray fluorescence analyses were performed to identify the mineralogical and chemical composition of Othoca ceramics and clayey raw material. The obtained results were then compared with own literature data concerning Phoenician and Punic pottery in order to find features related to the different ceramic productions and their provenance. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were also performed on the chemical compositional data in order to discriminate ceramic groups. A very complex situation was found: imported ceramics coming from Carthage, with a large-scale distribution, were found together with a predominant local production pottery. The archaeometric results demonstrate that historical and typological approach has to be supported by scientific analyses to better understand local or Mediterranean exchanges.     

The effect of protected areas on forest disturbance in the Carpathian Mountains 1985–2010

Protected areas are a cornerstone for forest protection, but they are not always effective during times of socioeconomic and institutional crises. The Carpathian Mountains in Eastern Europe are an ecologically outstanding region, with widespread seminatural and old‐growth forest. Since 1990, Carpathian countries (Czech Republic, Hungary, Poland, Romania, Slovakia, and Ukraine) have experienced economic hardship and institutional changes, including the breakdown of socialism, European Union accession, and a rapid expansion of protected areas. The question is how protected‐area effectiveness has varied during these times across the Carpathians given these changes. We analyzed a satellite‐based data set of forest disturbance (i.e., forest loss due to harvesting or natural disturbances) from 1985 to 2010 and used matching statistics and a fixed‐effects estimator to quantify the effect of protection on forest disturbance. Protected areas in the Czech Republic, Slovakia, and the Ukraine had significantly less deforestation inside protected areas than outside in some periods; the likelihood of disturbance was reduced by 1–5%. The effectiveness of protection increased over time in these countries, whereas the opposite was true in Romania. Older protected areas were most effective in Romania and Hungary, but newer protected areas were more effective in Czech Republic, and Poland. Strict protection (International Union for Conservation of Nature [IUCN] protection category Ia‐II) was not more effective than landscape‐level protection (IUCN III‐VI). We suggest that the strength of institutions, the differences in forest privatization, forest management, prior distribution of protected areas, and when countries joined the European Union may provide explanations for the strikingly heterogeneous effectiveness patterns among countries. Our results highlight how different the effects of protected areas can be at broad scales, indicating that the effectiveness of protected areas is transitory over time and space and suggesting that generalizations about the effectiveness of protected areas can be misleading.     

Using a Bayesian network to clarify areas requiring research in a host–pathogen system

Bayesian network analyses can be used to interactively change the strength of effect of variables in a model to explore complex relationships in new ways. In doing so, they allow one to identify influential nodes that are not well studied empirically so that future research can be prioritized. We identified relationships in host and pathogen biology to examine disease‐driven declines of amphibians associated with amphibian chytrid fungus (Batrachochytrium dendrobatidis). We constructed a Bayesian network consisting of behavioral, genetic, physiological, and environmental variables that influence disease and used them to predict host population trends. We varied the impacts of specific variables in the model to reveal factors with the most influence on host population trend. The behavior of the nodes (the way in which the variables probabilistically responded to changes in states of the parents, which are the nodes or variables that directly influenced them in the graphical model) was consistent with published results. The frog population had a 49% probability of decline when all states were set at their original values, and this probability increased when body temperatures were cold, the immune system was not suppressing infection, and the ambient environment was conducive to growth of B. dendrobatidis. These findings suggest the construction of our model reflected the complex relationships characteristic of host–pathogen interactions. Changes to climatic variables alone did not strongly influence the probability of population decline, which suggests that climate interacts with other factors such as the capacity of the frog immune system to suppress disease. Changes to the adaptive immune system and disease reservoirs had a large effect on the population trend, but there was little empirical information available for model construction. Our model inputs can be used as a base to examine other systems, and our results show that such analyses are useful tools for reviewing existing literature, identifying links poorly supported by evidence, and understanding complexities in emerging infectious‐disease systems.     

Field scale evaluation of volatile organic compound production inside biosecure swine mortality composts

Emergency mortality composting associated with a disease outbreak has special requirements to reduce the risks of pathogen survival and disease transmission. The most important requirements are to cover mortalities with biosecure barriers and avoid turning compost piles until the pathogens are inactivated. Temperature is the most commonly used parameter for assessing success of a biosecure composting process, but a decline in compost core temperature does not necessarily signify completion of the degradation process. In this study, gas concentrations of volatile organic compounds (VOCs) produced inside biosecure swine mortality composting units filled with six different cover/plant materials were monitored to test the state and completion of the process. Among the 55 compounds identified, dimethyl disulfide, dimethyl trisulfide, and pyrimidine were found to be marker compounds of the process. Temperature at the end of eight weeks was not found as an indicator of swine carcass degradation. However, gas concentrations of the marker compounds at the end of eight weeks were found to be related to carcass degradation. The highest gas concentrations of the marker compounds were measured for the test units with the lowest degradation (highest respiration rates). Dimethyl disulfide was found to be the most robust marker compound as it was detected from all composting units in the eighth week of the trial. Concentration of dimethyl disulfide decreased from a range of 290–4340 ppmv to 6–160 ppbv. Dimethyl trisulfide concentrations decreased to a range of below detection limit to 430 ppbv while pyrimidine concentrations decreased to a range of below detection limit to 13 ppbv.     

Design and risk assessment tool for vegetative treatment areas receiving agricultural wastewater: Preliminary results

Vegetative treatment areas (VTAs) are commonly being used as an alternative method of agricultural process wastewater treatment. However, it is also apparent that to completely prevent discharge of pollutants to the surrounding environment, settling of particulates and bound constituents from overland flow through VTAs is not sufficient. For effective remediation of dissolved agricultural pollutants, VTAs must infiltrate incoming wastewater. A simple water balance model for predicting VTA soil saturation and surface discharge in landscapes characterized by sloping terrain and a shallow restrictive layer is presented and discussed. The model accounts for the cumulative effect of successive rainfall events and wastewater input on soil moisture status and depth to water table. Nash–Sutcliffe efficiencies ranged from 0.65 to 0.81 for modeled and observed water table elevations after calibration of saturated hydraulic conductivity. Precipitation data from relatively low, average, and high annual rainfall years were used with soil, site, and contributing area data from an example VTA for simulations and comparisons. Model sensitivity to VTA width and contributing area (i.e. barnyard, feedlot, silage bunker, etc.) curve number was also investigated. Results of this analysis indicate that VTAs should be located on steeper slopes with deeper, more-permeable soils, which effectively lowers the shallow water table. In sloping landscapes (>2%), this model provides practitioners an easy-to-use VTA design and/or risk assessment tool that is more hydrological process-based than current methods.     

Female reproductive qualities affect male painted turtle (Chrysemys picta marginata) reproductive success

Male reproductive success (RS) in polygamous species with minimal social systems is often determined by the number of mates. However, because male RS is translated through females, the number of offspring sired can also be influenced by female qualities. Empirically sufficient data to document how tradeoffs between mate number and quality influence male RS are seldom available for long-lived, iteroparous species. We combined long-term life history data (1983–2006) on the E. S. George Reserve (ESGR, MI, USA) with parentage data from 155 clutches of 59 female painted turtles (Chrysemys picta marginata) of varying reproductive frequencies (2003–2006) to determine the relative contribution of female numbers and qualities on male RS. One previously documented trait of female painted turtles that can have substantial influences on male RS is repeat paternity through the use of stored sperm to fertilize over 95 % of within-year clutches. In addition, our study found that second-clutch producing female painted turtles on the ESGR have higher among-year reproductive frequencies than do first-clutch only females. Multiple paternity was detected in 14.1 % of clutches (min-max?=?6.1–30.0 % annually), and the number of mates of both sexes was low annually (males 1.0; females 1.2) and over 4 years (males 1.1; females 1.7). Among successful males, RS varied substantially (1–32 offspring) and was strongly influenced by the combination of female reproductive frequency and repeat paternity (>38 % among years), but not mate number. Low mate number for both sexes was unexpected in a species without complex mating behaviors or parental care.     

Application of carbon adsorbents prepared from Brazilian-pine fruit shell for the removal of reactive orange 16 from aqueous solution: Kinetic,equilibrium, and thermodynamic studies

Activated (AC-PW) and non-activated (C-PW) carbonaceous materials were prepared from the Brazilian-pine fruit shell (Araucaria angustifolia) and tested as adsorbents for the removal of reactive orange 16 dye (RO-16) from aqueous effluents. The effects of shaking time, adsorbent dosage and pH on the adsorption capacity were studied. RO-16 uptake was favorable at pH values ranging from 2.0 to 3.0 and from 2.0 to 7.0 for C-PW and AC-PW, respectively. The contact time required to obtain the equilibrium using C-PW and AC-PW as adsorbents was 5 and 4 h at 298 K, respectively. The fractionary-order kinetic model provided the best fit to experimental data compared with other models. Equilibrium data were better fit to the Sips isotherm model using C-PW and AC-PW as adsorbents. The enthalpy and entropy of adsorption of RO-16 were obtained from adsorption experiments ranging from 298 to 323 K.     

Reorienting Systematic Conservation Assessment for Effective Conservation Planning

Abstract: Systematic conservation assessment (an information‐gathering and prioritization process used to select the spatial foci of conservation initiatives) is often considered vital to conservation‐planning efforts, yet published assessments have rarely resulted in conservation action. Conservation assessments may lead more directly to effective conservation action if they are reoriented to inform conservation decisions. Toward this goal, we evaluated the relative priority for conservation of 7 sites proposed for the first forest reserves in the Union of the Comoros, an area with high levels of endemism and rapidly changing land uses in the western Indian Ocean. Through the analysis of 30 indicator variables measured at forest sites and nearby villages, we assessed 3 prioritization criteria at each site: conservation value, threat to loss of biological diversity from human activity, and feasibility of reserve establishment. Our results indicated 2 sites, Yiméré and Hassera‐Ndrengé, were priorities for conservation action. Our approach also informed the development of an implementation strategy and enabled an evaluation of previously unexplored relations among prioritization criteria. Our experience suggests that steps taken to ensure the closer involvement of practitioners, include a broader range of social data, encourage stakeholder participation, and consider the feasibility of conservation action can improve the relevance of assessments for conservation planning, strengthen the scientific basis for conservation decisions, and result in a more realistic evaluation of conservation alternatives.     

Salinity variations in the water resources fed by the Etnean volcanic aquifers (Sicily, Italy): natural vs. anthropogenic causes

In this paper, in an attempt to reveal possible changes connected to natural or anthropogenic causes, the main results of hydrogeochemical monitoring carried out at Mount Etna are evaluated. We report on the salinity contents of the groundwaters that flow in fractured volcanics, which make up the flanks of the volcano. These waters, analyzed for major ion chemistry, were sampled regularly from 1994 to 2004. Basing on nonparametric Sen??s slope estimator, time series of groundwater composition reveal that the salinity of most of the Etnean aquifers increased by 0.5% to 3.5% each year during this period. This change in the water chemistry is clearly referable to the overexploitation of the aquifers. This increasing trend needs to be inverted urgently; otherwise, it will cause a shortage of water in the near future, because the maximum admissible concentration of salinity for drinking water will be exceeded.     

Alternative amendment for soluble phosphorus removal from poultry litter

Background, aim, and scope  

Alum (aluminum sulfate) is the currently preferred chemical amendment for phosphorus (P) treatment in poultry litter (PL). Aluminum-based drinking-water treatment residuals (Al-WTRs) are the waste by-product of the drinking-water treatment process and have been effectively used to remove P from aqueous solutions, but their effectiveness in PL water extracts has not been studied in detail. Elevated cost associated with alum could be minimized by using the equally effective WTRs to remove soluble P from PL, and they can be obtained at a minimal cost from drinking-water treatment plants.