Micropollutants in urban stormwater: occurrence,concentrations, and atmospheric contributions for a wide range of contaminants in three French catchments

This study aimed at: (a) providing information on the occurrence and concentration ranges in urban stormwater for a wide array of pollutants (n?=?77); (b) assessing whether despite the differences between various catchments (land use, climatic conditions, etc.), the trends in terms of contamination level are similar; and (c) analyzing the contribution of total atmospheric fallout (TAF) with respect to sources endogenous to this contamination. The studied contaminants include conventional stormwater contaminants (polycyclic aromatic hydrocarbons (PAHs), Zn, Cu, Pb, etc.), in addition to poorly or undocumented pollutants such as nonylphenol and octylphenol ethoxylates (NPnEO and OPnEO), bisphenol A (BPA), polybrominated diphenyl ethers (PBDEs), a wide variety of pesticides, and various metals of relevance (As, Ti, Sr, V). Sampling and analysis were performed using homogeneous methods on three urban catchments with different land use patterns located in three distinct French towns. For many of these pollutants, the results do not allow highlighting a significant difference in stormwater quality at the scale of the three urban catchments considered. Significant differences were, however, observed for several metals (As, Cr, Cu, Ni, Sr and Zn), PAHs, and PBDEs, though this assessment would need to be confirmed by further experiments. The pollutant distributions between dissolved and particulate phases were found to be similar across the three experimental sites, thus suggesting no site dependence. Lastly, the contributions of TAF to stormwater contamination for micropollutants were quite low. This finding held true not only for PAHs, as previously demonstrated in the literature, but also for a broader range of molecules such as BPA, NPnEO, OPnEO, and PBDEs, whose high local production is correlated with the leaching of urban surfaces, buildings, and vehicles.     

Impacts on effluent contaminants from mine sites: risk assessment,fate, and distribution of pollution at basin scale

The environmental implications of mining activities are of worldwide concern. An environmental evaluation at the basin level was conducted because of widespread mining in Cajamarca in Northern Peru. A sediment monitoring program was developed at the Jequetepeque basin, located in Cajamarca. A total of 16 sites were monitored at three different times between June 2009 and July 2010, and a total of 42 samples were collected. All samples were analyzed by microwave digestion and by a sequential extraction scheme following the three-stage European Community Bureau of Reference (three-stage BCR) protocol. Trace element mobilization from the sediments to the water column was assessed by the risk assessment code (RAC). Spatial and temporal distribution of trace elements was evaluated by principal component analysis and hierarchical cluster analysis. Cd, Zn, As, and Pb showed the highest concentrations independent of season. Notably, Cu concentration and mobility increased during the wet season for all samples. Additionally, Hg concentration and mobility increased during the wet season near the mine sites. According to the enrichment factor, the highest enrichments of Cd, Zn, Pb, and As were related to mine runoff. The effect of trace elements near the mine sites at the Jequetepeque basin was considered a significant threat to the environment due to Cd, Zn, Pb, and As, and the concentrations of Cu and Hg were also considered a concern. This work establishes a baseline for the environmental quality status of the Jequetepeque basin that may support water quality management in Peru.     

The combined effects of urea application and simulated acid rain on soil acidification and microbial community structure

Our aim was to test the effects of simulated acid rain (SAR) at different pHs, when applied to fertilized and unfertilized soils, on the leaching of soil cations (K, Ca, Mg, Na) and Al. Their effects on soil pH, exchangeable H⁺ and Al³⁺ and microbial community structure were also determined. A Paleudalfs soil was incubated for 30 days, with and without an initial application of urea (200 mg N kg^?1soil) as nitrogen (N) fertilizer. The soil was held in columns and leached with SAR at three pH levels. Six treatments were tested: SAR of pH 2.5, 4.0 and 5.6 leaching on unfertilized soil (T1, T2 and T3), and on soils fertilized with urea (T4, T5 and T6). Increasing acid inputs proportionally increased cation leaching in both unfertilized and fertilized soils. Urea application increased the initial Ca and Mg leaching, but had no effect on the total concentrations of Ca, Mg and K leached. There was no significant difference for the amount of Na leached between the different treatments. The SAR pH and urea application had significant effects on soil pH, exchangeable H⁺ and Al³⁺. Urea application, SAR treated with various pH, and the interactions between them all had significant impacts on total phospholipid fatty acids (PLFAs). The highest concentration of total PLFAs occurred in fertilized soils with SAR pH5.6 and the lowest in soils leached with the lowest SAR pH. Soils pretreated with urea then leached with SARs of pH 4.0 and 5.6 had larger total PLFA concentrations than soil without urea. Bacterial, fungal, actinomycete, Gram-negative and Gram-positive bacterial PLFAs had generally similar trends to total PLFAs.     

Combination effects of anticholinesterasics in acetylcholinesterase of a fish species: effects of a metallic compound,an organophosphate pesticide,and a pharmaceutical drug

The simultaneous presence of distinct compounds in the aquatic environment can be causative of various toxicological interactions. This scenario challenges ecotoxicologists, since the assessment of toxicological effects caused by the simultaneous presence of multiple substances is by far more complicated. An illustrative example can be given by mentioning the anticholinesterasic compounds: by studying the level of cholinesterase impairment of an exposed organism, it is possible to ascertain the level of exposure to all anticholinesterasics (despite their chemical classes and natures) that the organism was subjected to. In this work, we describe the effects of three chemically different, albeit mechanistically, and toxicologically similar compounds (copper, chlorfenvinphos, and pyridostigmine) on cholinesterases of the fish Gambusia holbrooki. The results showed that the combinatorial effects may be of considerable extent, even for levels of exposure that are close to the ones already reported in the wild, for each isolated compound.     

Flow-injection analysis with fluorescence detection for the determination of trace levels of ammonium in seawater

A method using flow-injection, gas-diffusion, derivatisation and then fluorescent detection has been established for ammonium ion determination in seawater. The fluorescent derivative formed by reacting ortho-phthaldialdehyde (OPA) and sulfite with ammonia gives high sensitivity while removing potential interferences. This is required to measure the low concentrations of ammonium often seen in the open ocean. The experimental conditions (flow-rate, reagent concentrations, membrane configurations, etc.) were manipulated to improve performance. For a sample throughput of 30 samples h(-1), the limit of detection was 7 nM, the coefficient of variation was 5.7% at 800 nM, and the calibration curve was linear to at least 4 micromol L(-1). Interferences were minimised by a gaseous diffusion step. Volatile small molecular-weight amines as interferents were discriminated against by this method. They neither passed through the membrane as efficiently as ammonia, nor reacted as readily with OPA when sulfite was the reductant. Contamination by ammonia from laboratory and shipboard sources complicates application of the method to natural waters, especially measurement of low concentrations (<100 nM) in open-ocean waters. Steps to overcome contamination are described in detail. Some results are presented for ammonium determination in Southern Ocean and Huon Estuary (Tasmania) waters.     

An assessment of the bioavailability of persistent organic pollutants from contaminated soil

A procedure to assess the bioavailability of persistent organic pollutants (POPs) from soil samples has been developed. The procedure is based on the use of simulated in vitro gastrointestinal extraction to remove POPs from soil matrices. The level of recovery, using this approach, is assessed following liquid-liquid extraction (LLE) and analysis by gas chromatography-mass selective detection (GC-MSD). The remaining soil residue is then extracted using pressurised fluid extraction (PFE) followed by GC-MSD analysis to assess the residual fraction. The residual fraction is monitored to determine the unavailable fraction i.e. not available for absorption in the gastrointestinal tract of humans. The procedure was applied to four soil samples i.e. an aged, spiked soil and three certified reference materials (CRMs) contaminated with POPs. Recoveries of pesticides (lindane, endosulfan I, endrin, DDE, DDD and endosulfan II), phenols (cresol, TCP and PCP), and base neutral compounds (hexachloroethane, acenaphthene, dibenzofuran, fluorene and hexachlorobenzene) from aged, spiked soil following extraction with gastric fluid ranged from 0.8 to 8.3% while following intestinal extraction ranged from 5.5 to 13.5%, irrespective of POP. Recoveries of pesticides (lindane, endosulfan I, endrin, DDE, DDD and endosulfan II) from CRM 805-050 following extraction with gastric fluid were below the limit of detection while following intestinal extraction ranged from 5.3 to 12.8%. Recoveries of phenols (cresol, TCP and PCP) from CRM 401-225 following extraction with gastric fluid ranged from 1.6 to 2.0% while following intestinal extraction ranged from 4.1 to 5.4%. Recoveries of base neutral acid analytes (hexachloroethane, acenaphthene, dibenzofuran, fluorene and hexachlorobenzene) from CRM 107-100 following extraction with gastric fluid ranged from 1.4 to 4.0% while following intestinal extraction ranged from 6.6 to 12.7%. It has been found that the majority of POPs present i.e. >75%, would be excreted if consumed and not be absorbed in the gastrointestinal tract of humans.     

The organic composition of diesel particulate matter, diesel fuel and engine oil of a non-road diesel generator

Diesel-powered equipment is known to emit significant quantities of fine particulate matter to the atmosphere. Numerous organic compounds can be adsorbed onto the surfaces of these inhalable particles, among which polycyclic aromatic hydrocarbons (PAHs) are considered potential occupational carcinogens. Guidelines have been established by various agencies regarding diesel emissions and various control technologies are under development. The purpose of this study is to identify, quantify and compare the organic compounds in diesel particulate matter (DPM) with the diesel fuel and engine oil used in a non-road diesel generator. Approximately 90 organic compounds were quantified (with molecular weight ranging from 120 to 350), which include alkanes, PAHs, alkylated PAHs, alkylbenzenes and alkanoic acids. The low sulfur diesel fuel contains 61% alkanes and 7.1% of PAHs. The identifiable portion of the engine oil contains mainly the alkanoic and benzoic acids. The composition of DPM suggests that they may be originated from unburned diesel fuel, engine oil evaporation and combustion generated products. Compared with diesel fuel, DPM contains fewer fractions of alkanes and more PAH compounds, with the shift toward higher molecular weight ones. The enrichment of compounds with higher molecular weight in DPM may be combustion related (pyrogenic).     

Floristics, performance and prognosis of historical trees in the urban forest of Guangzhou City (China)

Outstanding historical trees embedded in cities constitute pertinent environmental assets, yet they are widely threatened in third-world cities. Inadequate understanding of this valuable natural-cum-cultural heritage hinders proper conservation. A case study of Guangzhou in south China evaluated floristic composition, age profile and biomass structure of historical trees, assessed their performance in major habitats (institutional, park and roadside), and established a prognosis for future growth and management. The 348 historical trees examined belonged to only 25 species, vis-à -vis 254 trees in the entire urban forest, dominated by five species and native members. Roadside had more trees, followed by institutional and park, with merely the most common four species shared by all habitats. The limited commonality reflected tree-performance differentiation by habitats exerting selection pressure on species. The institutional growth-regime was more conducive to nurturing high-caliber specimens, whereas park is less capable. Individual species achievement by habitats, derived from tree-count ranking and relative-abundance indices, could inform species choice and tree conservation. Few trees exceeded 300 years of age in the millennium-old city, echoing a history of intense tree—city conflicts. Potential life-span, trunk and crown diameters indicated ample opportunities for further expansion of biomass and landscape impacts, which would be straitjacketed by the tightening urban fabric.     

Metal Pollution Assessment of Sediment and Water in the River Hindon, India

The metal pollution in water and sediment of the River Hindon in western Uttar Pradesh (India) was assessed for Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn. The metal concentrations in water showed wide temporal variation compared with bed sediment because of variability in water discharge and variations in suspended solid loadings. Metal concentrations in bed sediments provided a better evaluation of the degree and the extent of contamination in the aquatic environment, Santagarh and Atali being the most polluted sites of the river. The ratio of heavy metals to conservative elements (Fe, Al, etc.) may reveal the geochemical imbalances due to the elevated metal concentrations normally attributed to anthropogenic sources. Metal/Al ratios for the bed sediments of the river Hindon were used to determine the relative mobility and general trend of relative mobility occurred Fe > Mn > Zn > Cr > Ni > Pb > Cu > Cd.     

Carbon dioxide emission tallies for 210 U.S. coal-fired power plants: A comparison of two accounting methods

Annual CO₂ emission tallies for 210 coal-fired power plants during 2009 were more accurately calculated from fuel consumption records reported by the U.S. Energy Information Administration (EIA) than measurements from Continuous Emissions Monitoring Systems (CEMS) reported by the U.S. Environmental Protection Agency. Results from these accounting methods for individual plants vary by ± 10.8%. Although the differences systematically vary with the method used to certify flue-gas flow instruments in CEMS, additional sources of CEMS measurement error remain to be identified. Limitations of the EIA fuel consumption data are also discussed. Consideration of weighing, sample collection, laboratory analysis, emission factor, and stock adjustment errors showed that the minimum error for CO₂ emissions calculated from the fuel consumption data ranged from ± 1.3% to ± 7.2% with a plant average of ± 1.6%. This error might be reduced by 50% if the carbon content of coal delivered to U.S. power plants were reported.

Implications:

Potentially, this study might inform efforts to regulate CO₂ emissions (such as CO₂ performance standards or taxes) and more immediately, the U.S. Greenhouse Gas Reporting Rule where large coal-fired power plants currently use CEMS to measure CO₂ emissions. Moreover, if, as suggested here, the flue-gas flow measurement limits the accuracy of CO₂ emission tallies from CEMS, then the accuracy of other emission tallies from CEMS (such as SO₂, NO_x, and Hg) would be similarly affected. Consequently, improved flue gas flow measurements are needed to increase the reliability of emission measurements from CEMS.