Characteristics of Stormwater Quality from Two Urban Watersheds in Singapore

This paper presents the results of a study on the quality of stormwater runoff from two adjacent urban watersheds in Singapore. The study involved continuous recording of rainfall and streamflow within the basins, and systematic sampling of storm runoff during rainfall events. The water samples collected were analysed for its physical and chemical constituents. The ranges and mean concentrations of common quality parameters have been established, and the flushing effects of selected parameters were studied. Correlations of event mean concentrations and pollution loads of total suspended solids and chemical oxygen demand to both antecedent dry weather period and rainfall characteristics were also carried out.     

Distribution of Organochlorine Pesticides in the Chao Phraya River, Thailand

Water samples from the Chao Phraya River, the main river in Thailand were collected and analyzed during 1988–1994. Organochlorine pesticides such as HCHs, DDTs, aldrin, dieldrin and chlordanes were determined. Aldrin and dieldrin had high frequencies of occurrence in water samples. The concentration median of the pesticides was approximately one order of magnitude higher than those of total HCHs and DDTs. Levels of aldrin were relatively high in the upstream while levels of DDTs were high in the urban area of Bangkok during 1989–1990. p,p-DDE levels were relatively higher in 1992. No clear trends in the levels of pesticides were observed.     

Soil Lead and Other Metal Levels in Industrial, Residential and Nature Reserve Areas in Singapore

The use of pressure feedback microwave digestion technique has permitted rapid and efficient digestion of soil and sediment samples. The evaluation of different acid mixtures to digest soil samples were studied by mixed-level orthogonal array design. The selected acid mixture of HCl-HNO3-HF was employed in the survey of Pb, Zn, Cu, Cr and Mn in soil samples. Surface soil samples were collected from industrial, residential and nature reserve areas in Singapore. The five metal concentrations were determined by flame atomic absorption spectrometry and graphite furnace atomic absorption spectrometry. The lead and other metal contents in NBS SRM 1645, NIES CRM No. 2 and NRCC BCSS-1 sediment standard references were determined concurrently with the survey samples. Five measured metal loading on the surface soils was in the order: industrial area > residential area > nature reserve area. The trace metal concentrations in surface soil from areas of heavy traffic are higher than those from residential areas. The main sources of trace metal pollution are vehicular exhaust and industrial activities.     

The Influence of pH on Mobility of Heavy Metals from Municipal Solid Waste Incinerator Fly Ash

Incineration has become one of the principal methods for municipal solid waste disposal particularly in all large cities throughout the world. Currently, the municipal solid waste incinerator fly ashes (MSWIF) are disposed of by landfill. The metal speciation of cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and zinc (Zn) in MSWIF after been extracted with water at different pH values were examined using a sequential extraction procedure. The extraction sequence was as follows: (1) Exchangeable (NaOAc, pH 8.2), (2) Bound to Carbonates (NaOAc, pH 5.0), (3) Bound to metal oxides (HONH3Cl), (4) Bound to organic matters (HNO3, H2O2), and (5) Residual (HNO3, HCl, H2O2, HF, 1:3:1:3). The heavy metal contents in the extraction solutions were determined by inductively coupled plasma atomic emission spectrometry. The heavy metal concentrations in the different fractions obtained by sequential extraction show distinct distribution trends. The extractable fraction ranges from 25.5 to 88% of the total element content. With the pH of the extractant fall below the neutral and acidic ranges, the concentrations of heavy metals rise substantially due to the released of metals bound to carbonate fraction.     

Applying mathematical programming to reserve selection

During the last 10–15 years heuristic methods have been developed for problems in optimal reserve selection. Unfortunately, there is no guarantee that heuristics will find optimal solutions. In recognizing this limitation, analysts have formulated reserve selection problems as set covering problems, for which matrix reduction and integer (0/1) programming can be used to find optimal solutions. In this paper we restate the set covering formulation and review solution techniques. A new 0/1 programming model, which is a generalization of the set covering model, is then presented and applied to a hypothetical reserve selection problem. Objectives of minimizing the number of sites selected and maximizing the number of species represented are addressed. Solutions which characterize the tradeoffs between these objectives provide a rich set of information for planners and decision makers. Applications of mathematical programming to related problems in land use planning and forestry are also discussed.     

Optimal and suboptimal control of anaerobic digesters

Anaerobic digester failure due to entry of inhibitors or sudden changes in the feed substrate concentration may be encompassed beneficially by applying optimal control theory. An almost proportional relationship between the dilution rate and the methane production rate leads to a simple suboptimal control law with only minor loss in performance, after the occurrence of the above mentioned events.     

Occurrence of alternative flame retardants in indoor dust from New Zealand: indoor sources and human exposure assessment

Due to worldwide restrictions on polybrominated diphenyl ethers (PBDEs), the demand for alternative flame retardants (AFRs), such as organophosphate flame retardants (OPFRs), novel brominated FRs (NBFRs) and hexabromocyclododecanes (HBCDs), has recently increased. Little is known about human exposure to NBFRs and OPFRs and that their levels in dust have been scarcely evaluated worldwide. To increase the knowledge regarding these chemicals, we measured concentrations of five major NBFRs, ten OPFRs and three HBCD isomers in indoor dust from New Zealand homes. Dust samples were taken from living room floors (n=34) and from mattresses of the same houses (n=16). Concentrations (ngg(-1)) of NBFRs were: 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) (<2-175), decabromodiphenyl ethane (DBDPE) (<5-1430), 2-ethylhexyl-2,3,4,5-tetrabromobenzoate (TBB) (<2-2285) and bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate (TBPH) (<2-640). For OPFRs, concentrations (ngg(-1)) ranged between: tri-ethyl-phosphate (TEP) (<10-235), tri-n-butyl-phosphate (TnBP) (<20-7545), tris-(2-chloroethyl)-phosphate (TCEP) (<20-7605), tris-(1-chloro-2-propyl) phosphate (TCPP) (20-7615), tri-(2-butoxyethyl)-phosphate (TBEP) (50-27325), tris-(2,3-dichloropropyl)-phosphate (TDCPP) (20-16560), tri-phenyl-phosphate (TPhP) (20-35190), and tri-cresyl-phosphate (TCP) (<50-3760). HBCD concentrations fell in the range <2-4100ngg(-1). BTBPE, DBDPE, TBPH, TBEP, and TnBP showed significant positive correlation (p<0.05) between their concentrations in mattresses and the corresponding floor dust (n=16). These data were used to derive a range of plausible exposure scenarios. Although the estimated exposure is well below the corresponding reference doses (RfDs), caution is needed given the likely future increase in use of these FRs and the currently unknown contribution to human exposure by other pathways such as inhalation and diet.     

Acute toxicity tests with Daphnia magna, Americamysis bahia, Chironomus riparius and Gammarus pulex and implications of new EU requirements for the aquatic effect assessment of insecticides

Threshold concentrations for treatment related effects of 31 insecticides, as derived from aquatic micro-/mesocosm tests, were used to calibrate the predictive value of the European Tier-1 acute effect assessment on basis of laboratory toxicity tests with Daphnia magna, Chironomus spp., Americamysis bahia and Gammarus pulex. The acute Tier-1 effect assessment on basis of Daphnia (EC(50)/100) overall was protective for organophosphates, carbamates and most pyrethroids but not for neonicotinoids and the majority of insect growth regulators (IGRs) in the database. By including the 28-day water-spiked Chironomus riparius test, the effect assessment improves but selecting the lowest value on basis of the 48-h Daphnia test (EC50/100) and the 28-day Chironomus test (NOEC/10) is not fully protective for 4 out of 23 insecticide cases. An assessment on basis of G. pulex (EC(50)/100) is sufficiently protective for 15 out of 19 insecticide cases. The Tier-1 procedure on basis of acute toxicity data (EC(50)/100) for the combination of Daphnia and A. bahia and/or Chironomus (new EU dossier requirements currently under discussion) overall is protective to pulsed insecticide exposures in micro-/mesocosms. For IGRs that affect moulting, the effect assessment on basis of the 48-h Chironomus test (EC(50)/100) may not always be protective enough to replace that of the water-spiked 28-day C. riparius test (NOEC/10) because of latency of effects.     

Impact of injection system design on ISCO performance with permanganate--mathematical modeling results

In situ chemical oxidation (ISCO) using permanganate (MnO(4)(-)) can be a very effective technique for remediation of soil and groundwater contaminated with chlorinated solvents. However, many ISCO projects are less effective than desired because of poor delivery of the chemical reagents to the treatment zone. In this work, the numerical model RT3D was modified and applied to evaluate the effect of aquifer characteristics and injection system design on contact and treatment efficiency. MnO(4)(-) consumption was simulated assuming the natural oxidant demand (NOD) is composed of a fraction that reacts instantaneously and a fraction that slowly reacts following a 2nd order relationship where NOD consumption rate increases with increasing MnO(4)(-) concentration. MnO(4)(-) consumption by the contaminant was simulated as an instantaneous reaction. Simulation results indicate that the mass of permanganate and volume of water injected has the greatest impact on aquifer contact efficiency and contaminant treatment efficiency. Several small injection events are not expected to increase contact efficiency compared to a single large injection event, and can increase the amount of un-reacted MnO(4)(-) released down-gradient. High groundwater flow velocities can increase the fraction of aquifer contacted. Initial contaminant concentration and contaminant retardation factor have only a minor impact on volume contact efficiency. Aquifer heterogeneity can have both positive and negative impacts on remediation system performance, depending on the injection system design.