Polycyclic aromatic hydrocarbons in the bulk precipitation and surface waters of Northern Greece

Bulk (wet and dry) precipitation and surface water sampling was undertaken in the main plain of central Macedonia in Northern Greece. Fourteen polycyclic aromatic hydrocarbons (PAHs) included in the US EPA's priority pollutant list were analysed. The concentrations determined in bulk precipitation were in general within the range of values worldwide reported. Concentrations were highest in the cold months. Deposition fluxes of PAHs were of the same order of magnitude as reported data. The greatest values were found when high concentrations of PAHs in precipitation coincided with large precipitation amounts. The concentrations of PAHs in surface waters (main rivers, tributaries, ditches, etc) were in general lower than those in bulk precipitation, and among the lowest reported for European rivers, excepting Np and Ph. Bulk deposition and domestic effluents are suggested as being the main PAH sources into surface waters.     

Application of a constructed wetland for industrial wastewater treatment: a pilot-scale study

The main objective of this study was to examine the efficacy and capacity of using constructed wetlands on industrial pollutant removal. Four parallel pilot-scale modified free water surface (FWS) constructed wetland systems [dimension for each system: 4-m (L)x1-m (W)x1-m (D)] were installed inside an industrial park for conducting the proposed treatability study. The averaged influent contains approximately 170 mg l(-1) chemical oxygen demand (COD), 80 mg l(-1) biochemical oxygen demand (BOD), 90 mg l(-1) suspend solid (SS), and 32 mg l(-1) NH(3)-N. In the plant-selection study, four different wetland plant species including floating plants [Pistia stratiotes L. (P. stratiotes) and Ipomoea aquatica (I. aquatica)] and emergent plants [Phragmites communis L. (P. communis) and Typha orientalis Presl. (T. orientalis)] were evaluated. Results show that only the emergent plant (P. communis) could survive and reproduce with a continuous feed of 0.4m(3)d(-1) of the raw wastewater. Thus, P. communis was used in the subsequent treatment study. Two different control parameters including hydraulic retention time (HRT) (3, 5, and 7d) and media [vesicles ceramic bioballs and small gravels, 1cm in diameter] were examined in the treatment study. Results indicate that the system with a 5-d HRT (feed rate of 0.4m(3)d(-1)) and vesicles ceramic bioballs as the media had the acceptable and optimal pollutant removal efficiency. If operated under conditions of the above parameters, the pilot-plant wetland system can achieve removal of 61% COD, 89% BOD, 81% SS, 35% TP, and 56% NH(3)-N. The treated wastewater meets the current industrial wastewater discharge standards in Taiwan.     

Bioavailability of persistent organic pollutants in soils and sediments--a perspective on mechanisms, consequences and assessment

It has been observed that as soil-pollutant contact time increases, pollutant bioavailability and extractability decreases. This phenomenon has been termed 'ageing'. Decreased chemical extractability with increased soil-chemical contact time is evident where both 'harsh' techniques, e.g. dichloromethane Soxhlet extraction, and 'non-exhaustive' techniques, e.g. butanol shake extraction, have been used. It has also been observed that the amount of chemical extracted by these techniques varies considerably over time. Similarly, decreases in bioavailability with increased soil-pollutant contact time have been described in bacterial, earthworm and other organism studies. From these investigations, it has been shown that the fraction of pollutant determined to be bioavailable can vary between organisms. Thus, there is an immediate definition problem, what is bioavailability? Additionally, if bioavailability is to be assessed by a chemical means, which organisms should (or can) be mimicked by the extraction procedure? This review provides a background to the processes inherent to ageing, a discussion of its consequences on bioavailability and ends with some reflections on the appropriateness of chemical extraction techniques to mimic bioavailability     

The global re-cycling of persistent organic pollutants is strongly retarded by soils

'Persistent organic pollutants' (POPs) are semi-volatile, mobile in the environment and bioaccumulate. Their toxicity and propensity for long-range atmospheric transport (LRAT) has led to international bans/restrictions on their use/release. LRAT of POPs may occur by a 'single hop' or repeated temperature-driven air-surface exchange. It has been hypothesised that this will result in global fractionation and distillation-with condensation and accumulation in polar regions. Polychlorinated biphenyls (PCBs)--industrial chemicals banned/restricted in the 1970s--provide a classic illustration of POP behaviour. A latitudinally-segmented global PCB inventory has been produced, which shows that approximately 86% of the 1.3 x 10(6) tonnes produced was used in the temperate industrial zone of the northern hemisphere. A global survey of background surface soils gives evidence for 'fractionation' of PCBs. More significantly, however, very little of the total inventory has 'made the journey' via primary emission and/or air-surface exchange and LRAT out of the heavily populated source regions, in the 70 years since PCBs were first produced. Soils generally occlude PCBs, especially soils with dynamic turnover of C/bioturbation/burial mechanisms. This limits the fraction of PCBs available for repeated air-soil exchange. The forested soils of the northern hemisphere, and other C-rich soils, appear to be playing an important role in 'protecting' the Arctic from the advective supply of POPs. Whilst investigations on POPs in remote environments are important, it is imperative that researchers also seek to better understand their release from sources, persistence in source regions, and the significant loss mechanisms/global sinks of these compounds, if they wish to predict future trends.     

Food waste collection and recycling for value-added products: potential applications and challenges in Hong Kong

About 3600 tonnes food waste are discarded in the landfills in Hong Kong daily. It is expected that the three strategic landfills in Hong Kong will be exhausted by 2020. In consideration of the food waste management environment and community needs in Hong Kong, as well as with reference to the food waste management systems in cities such as Linköping in Sweden and Oslo in Norway, a framework of food waste separation, collection, and recycling for food waste valorization is proposed in this paper. Food waste can be packed in an optic bag (i.e., a bag in green color), while the residual municipal solid waste (MSW) can be packed in a common plastic bag. All the wastes are then sent to the refuse transfer stations, in which food waste is separated from the residual MSW using an optic sensor. On the one hand, the sorted food waste can be converted into valuable materials (e.g., compost, swine feed, fish feed). On the other hand, the sorted food waste can be sent to the proposed Organic Waste Treatment Facilities and sewage treatment works for producing biogas. The biogas can be recovered to produce electricity and city gas (i.e., heating fuel for cooking purpose). Due to the challenges faced by the value-added products in Hong Kong, the biogas is recommended to be upgraded as a biogas fuel for vehicle use. Hopefully, the proposed framework will provide a simple and effective approach to food waste separation at source and promote sustainable use of waste to resource in Hong Kong.     

Methanol fuel production,utilization, and techno-economy: a review

Environmental Chemistry Letters - Climate change and the unsustainability of fossil fuels are calling for cleaner energies such as methanol as a fuel. Methanol is one of the simplest molecules for...     

Biodegradation of phthalate esters by two bacteria strains

In this study two aerobic phthalic acid ester (PAE) degrading bacteria strains, DK4 and O18, were isolated from river sediment and petrochemical sludge, respectively. The two strains were found to rapidly degrade PAE with shorter alkyl-chains such diethyl phthalate (DEP), dipropyl phthalate (DPrP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP) and diphenyl phthalate (DPP) are very easily biodegraded, while PAE with longer alkyl-chains such as dicyclohexyl phthalate (DCP) and dihexyl phthalate (DHP) and di-(2-ethylhexyl) phthalate (DEHP) are poorly degraded. The degradation rates of the eight PAEs were higher for strain DK4 than for strain O18. In the simultaneous presence of strains DK4 and O18, the degradation rates of the eight PAEs examined were enhanced. When the eight PAEs were present simultaneously, degradation rates were also enhanced. We also found that PAE degradation was delayed by the addition of nonylphenol or selected polycyclic aromatic hydrocarbons (PAHs) at a concentration of 1 microg/g in the sediment. The bacteria strains isolated, DK4 and O18, were identified as Sphigomonas sp. and Corynebacterium sp., respectively.     

Photocatalytic oxidation of triclosan

In the spring of 2003, there was an outbreak of the severe respiratory syndrome (SARS) in Hong Kong. Health concerns have thus triggered an increased and predominant use of various types of household cleansing agents such as triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol). However, it has been reported recently that triclosan could be photochemically converted to toxic 2,8-dichlorodibenzo-p-dioxin (2,8-Cl(2)DD) in the environment. It is therefore necessary to develop environmentally friendly methods for the treatment of triclosan. To this end, photocatalytic degradation of triclosan in aqueous solution was conducted using TiO(2) (Degussa P25) under irradiation of UV light (lambda < 365 nm). It was found that triclosan could be degraded by this approach. Hydrogen peroxide was added to enhance the degradation process, and the optimal initial hydrogen peroxide concentration for triclosan degradation was 0.005% (w/v). Product identification indicated that triclosan oxidation occurred at its phenol moiety and yielded quinone and hydroquinone intermediates. The formation of a dichlorophenol intermediate in triclosan degradation suggested bond-breaking of the ether linkage occurred during the process. Moreover, no chlorinated dibenzo-p-dioxin congener was detected. These findings confirm that the photocatalytic degradation of triclosan is an environmentally friendly process.     

On-road motor vehicle emissions and fuel consumption in urban driving conditions

This paper reports on the analysis of on-road vehicle speed, emission, and fuel consumption data collected by four instrumented vehicles. Time-, distance-, and fuel-based average fuel consumption, as well as CO, HC, NOx, and soot emission factors, were derived. The influences of instantaneous vehicle speed on emissions and fuel consumption were studied. It was found that the fuel-based emission factors varied much less than the time- and distance-based emission factors as instantaneous speed changed. The trends are similar to the results obtained from laboratory tests. The low driving speed contributed to a significant portion of the total emissions over a trip. Furthermore, the on-road data were analyzed using the modal approach. The four standard driving modes are acceleration, cruising, deceleration, and idling. It was found that the transient driving modes (i.e., acceleration and deceleration) were more polluting than the steady-speed driving modes (i.e., cruising and idling) in terms of g/km and g/sec. These results indicated that the on-road emission measurement is feasible in deriving vehicle emissions and fuel consumption factors in urban driving conditions.     

Phosphorus fractionation in lake sediments--lakes Volvi and Koronia, N. Greece

Sediments from two lakes, the meso-to-eutrophic Volvi and the hypertrophic Koronia, located in N. Greece were examined on the basis of P-fractionation. In both lakes, the rank order of P-fractions was HCl-P > NaOH-P > BD-P > NH4Cl-P. The loosely sorbed phosphorus (NH4Cl-P) represented < 1% of the sedimentary inorganic phosphorus, while the reductant phosphorus (BD-P) ranged 5-6%. The calcium bound phosphorus (HCl-P) showed considerable contribution (59-74%) to the sedimentary inorganic P-loads. The metal oxide bound phosphorus (NaOH-P) was higher in the hypertrophic (30-35%) than in the meso-to-eutrophic system (19-28%). Fine-sized sediments exhibited significantly higher concentrations of HCl-P in Volvi and NH4Cl-P in Koronia. Sampling month had significant effect in variance of most P-fractions and other sediment features in both lakes. Use was also made of multivariate statistics to identify the factors which influence the sedimentary phosphorus. NaOH-P was the most reactive fraction in Lake Volvi. Iron compounds and organic matter seem to play a significant role in regulating this labile P-budget. NH4Cl-P was the more reactive fraction in Lake Koronia which was influenced by sedimentation of P-absorbed on clay/silt fine particles.