我国钛白粉工业发展现状与环境政策研究

针对我国钛白粉工业发展的现状与存在的问题,深入分析造成钛白粉上业现状的原因,并从环保角度提出对策与建议.     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

中国耕地非农化压力时空格局的演变分析

社会经济和资源禀赋的区域差异导致耕地非农化压力表现出明显的空间异质性。开展耕地非农化压力测算并揭示其时空格局演变,是实现土地资源优化配置的基础。从经济因素、社会因素、产业结构和资源禀赋4个方面构建耕地非农化压力指数评价指标体系,采用熵值法计算各指标权重,继而计算1990~2014年中国31省的耕地非农化压力指数,并在此基础上开展了耕地非农化压力的时空格局分析。结果表明:(1)从空间格局分布来看,中国耕地非农化压力空间分布呈现明显的地理梯度,总体上呈现从东到西依次递减的态势。(2)从时间变化趋势来看,不同地区各省份之间的耕地非农化压力指数变化呈现多元化趋势。东部沿海地区,山东、浙江、江苏的耕地非农化压力指数处于上升阶段,上海、福建的压力指数变化趋势逐渐趋稳,广东的压力指数呈现下降趋势。中部地区,河南、河北、山西、江西的耕地非农化压力指数趋稳,陕西、湖北以及四川、重庆等西南地区省份的压力指数呈上升趋势。西部沿边3省(云南、西藏、新疆)的耕地非农化压力呈现了一致的下降趋势。(3)从时空格局结合来看,耕地非农化压力不同的省份其变化趋势呈现出截然不同的走向。在耕地非农化压力较大的地区,耕地非农化经历了从制度驱动向发展推动的阶段,经济增长的倒"U"型轨迹明显,经济增长与耕地非农化之间的关系逐渐脱钩。在耕地非农化压力居中或较小的地区,产业发展滞后,土地比较收益较低,耕地的社会保障作用、生态作用对耕地非农化的影响较大,从而增加了部分省份的耕地非农化压力。     

Bioconversion of dairy manure by black soldier fly (Diptera: Stratiomyidae) for biodiesel and sugar production

Modern dairies cause the accumulation of considerable quantity of dairy manure which is a potential hazard to the environment. Dairy manure can also act as a principal larval resource for many insects such as the black soldier fly, Hermetia illucens. The black soldier fly larvae (BSFL) are considered as a new biotechnology to convert dairy manure into biodiesel and sugar. BSFL are a common colonizer of large variety of decomposing organic material in temperate and tropical areas. Adults do not need to be fed, except to take water, and acquired enough nutrition during larval development for reproduction. Dairy manure treated by BSFL is an economical way in animal facilities. Grease could be extracted from BSFL by petroleum ether, and then be treated with a two-step method to produce biodiesel. The digested dairy manure was hydrolyzed into sugar. In this study, approximately 1248.6 g fresh dairy manure was converted into 273.4 g dry residue by 1200 BSFL in 21 days. Approximately 15.8 g of biodiesel was gained from 70.8 g dry BSFL, and 96.2 g sugar was obtained from the digested dairy manure. The residual dry BSFL after grease extraction can be used as protein feedstuff.     

Methods for the preparation of a biodesulfurization biocatalyst using Rhodococcus sp

Several methods to prepare a biodesulfurization (BDS) biocatalyst were investigated in this study using a strain of Rhodococcus sp. 1awq. This bacterium could selectively remove sulfur from dibenzothiophene (DBT) via the "4S" pathway. DBT, dimethylsulfoxide (DMSO), sodium sulphate and mixed sulfur sources were used to study their influence on cell density, desulfurization activity, desulfurization ability, and the cost of biocatalyst production. In contrast to that observed from bacteria cultured in DBT, only partial desulfurization activity of strain 1awq was induced by DBT after cultivation in a medium containing inorganic sulfur as the sole sulfur source. The biocatalyst, prepared from culture with mixed sulfur sources, was found to possess desulfurization activity. With DMSO as the sole sulfur source, the desulfurization activity was shown to be similar to that of bacteria incubated in medium with DBT as the sole sulfur source. The biocatalyst prepared by this method with the least cost could remove sulfur from hydrodesulfurization (HDS)-treated diesel oil efficiently, providing a total desulfurization percent of 78% and suggesting its cost-effective advantage.     

宁波-舟山海域入海污染物环境容量研究

在宁波-舟山海域数值模拟潮流场的基础上,建立了该海域各污染源的响应系数场,计算了主要污染源COD、无机氮和活性磷酸盐的分担率场,及各污染源和控制单元的环境容量.研究结果将为该海域入海污染物总量控制提供科学依据.     

日本二噁英减排控制的历程、经验与启示

二噁英减排控制是《关于持久性有机污染物的斯德哥尔摩公约》的重要任务,是履行公约义务的难点.对日本二噁英减排控制20年来的实践历程进行了回顾和分析,总结出了其协调管理机制设立、法律法规标准建立、监测能力建设以及宣传教育等八个方面的成功经验,对中国二噁英减排控制工作有重要的借鉴意义.     

曝气生物滤池处理焦化废水脱氮的研究

用曝气生物滤池处理焦化废水的研究表明,在曝气量(Q)=0.25L/min,温度(T)=20℃,pH=8,反冲洗周期为3个运行周期内,NH3-N的去除速率达44 mg/L·h.同时在滤池中出现了亚硝酸盐积累现象,且受反冲洗的影响较大.     

各种影响因子对电解法预处理医药废水的影响研究

探讨了电解法预处理医药废水时停留时间、电解电压、废水初始浓度、温度和废水pH值等影响因子对去除色度、COD和提高废水可生化性等处理效果的影响，并考察了其应用于工业实际废水处理的可行性。实验结果表明：电解法更适合高浓度医药废水的处理，色度的去除率可达到90％以上；电解时间宜控制在40-60min；电解电压越高，废水COD和色度去除效果越好；在实验温度范围内，温度对色度和COD去除率的影响不大；废水pH值为7．5时电解效果最佳，工程运用宜控制在6—9之间。     

气-水联合反冲洗膜污染防治技术研究

采用气水联合反冲洗技术,考察了气水比(Qg/Ql)、反冲洗周期及其对膜污染的防治效果。结果表明,气水联合反冲洗较单独气或水反冲洗效果好;在过滤周期20min,反冲洗时间1min,气水比1.5时,气水联合反冲洗能够恢复膜通量到膜清水通量的80%以上。此法可大幅度清除沉积在膜表面的泥饼层,恢复膜通量,维持膜过滤性能的稳定,是一种较为有效的膜污染防治技术。