不同温度下约束钢梁的落锤冲击响应分析

研究不同温度和冲击荷载作用下约束钢梁的动力响应问题。利用通用非线性有限元分析程序ANSYS/LS-DYNA,分别模拟了两端固支、一端固支一端轴向弹簧约束的钢梁在不同温度下受到落锤冲击时的动力响应。在温度荷载和冲击荷载联合作用下,分析了位移响应、撞击力时程曲线及冲量等的温度效应。通过撞击力时程曲线分析得出最大撞击力随温度的变化趋势与欧洲规范EC3给出的不同温度下的钢材的屈服强度折减系数的变化趋势相似,钢梁跨中的横向位移随着温度的升高而增加。还分析了高温和冲击荷载联合作用下落锤的撞击速度、不同的质量—速度组合、横向加劲肋对钢梁的变形的影响。     

介质阻挡放电常压降解哈隆的研究

本文以介质阻挡放电的方式产生低温等离子体,利用低温等离子体技术成功地降解了常压状况下的气态ＣＦ２ＣｌＢｒ,ＣＦ２ＣｌＢｒ含量为０．６％的空气在放电１０ｓ的条件下,可使ＣＦ２ＣｌＢｒ达到９５％的降解率。本文研究了常压状况下的ＣＦ２ＣｌＢｒ低温等离子体空间反应机理,以及ＣＦ２ＣｌＢｒ初妈压力,电场强度和外加气体分别对低温等离子体降解ＣＦ２ＣｌＢｒ的影响。     

模糊数学在丹河水环境综合评价中的应用

根据模糊数学的方法,将隶属甬数和隶属度等概念引入丹河水环境评价中,用矩阵分析的方法建立模糊综合评价模式.建立评价因子的因子集、评价集、隶属函数和权重集等模糊集合,对丹河进行了分类和质量标准的划分,根据各污染因子对水质的影响差异确定其权重,对丹河流域水环境模糊综合评价,采用了最大隶属度原则和加权平均原则相结合.结果表明评价结果与实际情况有较好的吻合.     

应用概率物种敏感度分布法研究太湖铜水生生物水质基准

运用概率物种敏感度分布法获得太湖水体中铜的急性水质基准值为14.57μg·L-1,慢性水质基准值为3.26μg·L-1;不同类别物种敏感性存在差异,无脊椎动物较脊椎动物更敏感,甲壳类敏感性大于鱼类。概率物种敏感度分布法与传统的物种敏感度分布法相比,更全面合理地考虑多种毒性效应,曲线拟合效果好,受数据量大小影响较小,结果更加稳定。研究结论可为铜水质标准的修订和太湖流域水环境管理提供技术支持。     

纳米Pd／Fe双金属颗粒对单氯酚及二氯酚的还原脱氯

采用改进液相化学还原法制备纳米Pd／Fe双金属颗粒,研究其钯化率为0．045％和0．135％的条件下分别对3种单氯酚（2-CP、3-CP和4-CP）和3种二氯酚（2,3-DCP、2,4-DCP和2,6-DCP）的脱氯反应。结果表明,合成的纳米Pd／Fe颗粒分散性良好,粒径分布介于25～40nm。纳米Pd／Fe双金属颗粒对单氯酚及二氯酚具有良好的去除效果,3种单氯酚和3种二氯酚的脱氯难易程度分别为2-CP〉4-CP〉3-CP和2,6-DCP〉2,4-DCP〉2,3-DCP,脱氯反应均符合拟一级反应动力学方程。通过还原脱氯实验揭示了分子中氯原子的化学环境对还原脱氯过程具有明显影响。     

Recovery and reuse of floc sludge for high-performance capacitors

• The feasibility of facile fabrication of capacitor from floc sludge is discussed. • The porous carbon composites are obtained by acidification and KOH activation. • The as-prepared 3D structure has large surface area and optimal pore size. • Admirable specific capacitance and outstanding cycling stability are obtained. In this paper, floc sludge was transformed into porous carbon matrix composites by acidification and KOH activation at high temperature and used as an electrode material for application in capacitors. The effects of different treatment processes on the electrochemical properties of sludge materials were compared. The results of electrochemical tests showed that the sludge electrode exhibited excellent energy storage performance after HNO₃ acidification and KOH activation with a mass ratio of 3:1 (KOH/C). The specific capacitance of the sludge electrode reached 287 F/g at a current density of 1 A/g. In addition, the sludge electrode material showed excellent cycle stability (specific capacity retained at 93.4% after 5000 cycles at 5 A/g). Based on XRD, FTIR, SEM, TEM, and BET surface analysis, the morphology of sludge electrode materials can be effectively regulated by chemical pretreatment. The best-performing material showed a 3D porous morphology with a large specific surface area (2588 m²/g) and optimal pore size distribution, improving ion channels and charge conductivity. According to the life cycle assessment of floc sludge utilization, it reduced the resource consumption and toxicity risk by more than 90% compared with ordinary sludge disposal processes. This work provided a cost-effective and eco-friendly sludge reuse method and demonstrated the application potential of sludge-based materials in high-performance supercapacitors.     

Partial anammox achieved in full scale biofilm process for typical domestic wastewater treatment

• A full scale biofilm process was developed for typical domestic wastewater treatment. • The HRT was 8 h and secondary sedimentation tank was omitted. • Candidatus Brocadia were enriched in the HBR with an abundance of 2.89%. • Anammox enabled a stable ammonium removal of ~15% in the anoxic zone. The slow initiation of anammox for treating typical domestic wastewater and the relatively high footprint of wastewater treatment infrastructures are major concerns for practical wastewater treatment systems. Herein, a 300 m³/d hybrid biofilm reactor (HBR) process was developed and operated with a short hydraulic retention time (HRT) of 8 h. The analysis of the bacterial community demonstrated that anammox were enriched in the anoxic zone of the HBR process. The percentage abundance of Candidatus Brocadia in the total bacterial community of the anoxic zone increased from 0 at Day 1 to 0.33% at Day 130 and then to 2.89% at Day 213. Based upon the activity of anammox bacteria, the removal of ammonia nitrogen (NH₄⁺-N) in the anoxic zone was approximately 15%. This showed that the nitrogen transformation pathway was enhanced in the HBR system through partial anammox process in the anoxic zone. The final effluent contained 12 mg/L chemical oxygen demand (COD), 0.662 mg/L NH₄⁺-N, 7.2 mg/L total nitrogen (TN), and 6 mg/L SS, indicating the effectiveness of the HBR process for treating real domestic wastewater.     

Enhanced photocatalytic degradation of VOCs using Ln3+-TiO2 catalysts for indoor air purification

Two types of lanthanide ion-doped titanium dioxide (Ln3+-TiO2) catalysts including La3+-TiO2 and Nd3+-TiO2 were prepared by a sol-gel method. The effects of the lanthanide ion doping on the crystal structure, surface area, adsorption properties, pore size distribution, and surface chemical state of the catalysts were investigated by means of XRD, BET, and XPS. As results, the crystal size decreased significantly, while the specific surface area, t-plot total surface area, micropore volume, and the total pore volume increased owing to the lanthanide ion doping. The nitrogen adsorption-desorption isotherms of the catalysts showed that the N2 adsorption ability of the Ln3+-TiO2 catalysts was better than the TiO2 catalyst. Among them, the 0.7% Ln3+-TiO2 catalysts demonstrated the highest adsorption ability. The photocatalytic activity of the catalysts was investigated in the experiments of the photocatalytic degradation of benzene, toluene, ethylbenzene and o-xylene (BTEX) in a gaseous phase. The photocatalytic efficiency of the TiO2 catalysts with the lanthanide ion doping was remarkably enhanced by BTEX removal. The 1.2% Ln3+-TiO2 catalysts achieved the highest photocatalytic activity. The enhanced photodegradation of BTEX is possibly due to the improved adsorption ability and the enhanced electron-hole pairs separation due to the presence of Ti3+ on the surface of Ln3+-TiO2 catalysts and the electron transfer between the conduction band/defect level and lanthanide crystal field state.     

制备条件对不同玻璃材料负载TiO_2活性影响研究

以光催化降解苯酚为探针反应,通过正交实验,系统研究了胶液配比、涂覆次数和焙烧温度等条件对以溶胶-凝胶法分别在普通钠钙玻璃和磨砂玻璃上制备TiO2光催化性能的影响,并利用环境扫描电镜（ESEM）对TiO2催化膜形貌进行了分析。研究表明,在普通钠钙玻璃片上负载TiO2催化膜的影响因素主次顺序为：硝酸体积〉涂覆次数〉焙烧温度〉V乙醇∶V酞酸丁酯,在选定实验条件下的最优条件为：涂覆次数为4次;焙烧温度=450℃;V乙醇∶V酞酸丁酯∶V硝酸（1∶4）：V水=400∶40∶1∶4。在磨砂玻璃片上负载TiO2催化膜的的影响因素主次顺序为：涂覆次数〉硝酸体积〉焙烧温度〉V乙醇：V酞酸丁酯,在选定实验条件下的最优条件为：涂覆次数为4次;焙烧温度=500℃;V乙醇∶V酞酸丁酯∶V硝酸（1∶4）∶V水=400∶40∶2∶4。通过扫描电镜可以观察到在普通钠钙玻璃片和磨砂玻璃片表面均附着一层白色的TiO2薄膜,颗粒粒径在100 nm左右。磨砂玻璃比普通钠钙玻璃负载更多的催化剂,磨砂玻璃基TiO2活性更高。磨砂玻璃是一种非常有前景的TiO2催化剂载体材料。     

石油污染土壤的植物修复研究进展

石油的开采、加工、输送及使用过程中,对大气、土壤、水体带来了严重污染,对土壤环境的危害尤为严重。植物修复以其处理成本低、吸收污染物的生物量大等优点已成为人们普遍能接受的去除污染物的首选技术。植物主要通过三种途径去除土壤中有机污染物,即植物直接吸收有机污染物;释放分泌物和酶,刺激根区微生物活性和生物转化作用;增强根区的矿化作用。植物修复石油烃污染土壤的影响因素有:环境条件、污染物的浓度和滞留时间、营养元素、表面活性剂、根系分布等。通过植物-微生物联合修复、机械-微生物-植物多技术联用等措施,可提高石油烃的降解率。