An Inexpensive Dual-Chamber Particle Monitor: Laboratory Characterization

Abstract

In developing countries, high levels of particle pollution from the use of coal and biomass fuels for household cooking and heating are a major cause of ill health and premature mortality. The cost and complexity of existing monitoring equipment, combined with the need to sample many locations, make routine quantification of household particle pollution levels difficult. Recent advances in technology, however, have enabled the development of a small, portable, data-logging particle monitor modified from commercial smoke alarm technology that can meet the needs of surveys in the developing world at reasonable cost. Laboratory comparisons of a prototype particle monitor developed at the University of California at Berkeley (UCB) with gravi-metric filters, a tapered element oscillating microbalance, and a TSI DustTrak to quantify the UCB particle monitor response as a function of both concentration and particle size and to examine sensor response in relation to changes in temperature, relative humidity, and elevation are presented here. UCB particle monitors showed good linearity in response to different concentrations of laboratory-generated oleic acid aerosols with a coarse (mass median diameter, 2.1 µm) and fine (mass median diameter, 0.27–0.42 µm) size distributions (average r² = 0.997 ± 0.005). The photoelectric and ionization chamber showed a wide range of responses based on particle size and, thus, require calibration with the aerosol of interest. The ionization chamber was five times more sensitive to fine rather than coarse particles, whereas the photoelectric chamber was five times more sensitive to coarse than fine. The ratio of the response between the two sensors has the potential for mass calibration of individual data points based on estimated parameters of the size distribution. The results demonstrate the significant potential of this monitor, which will facilitate the evaluation of interventions (improved fuels, stoves, and ventilation) on indoor air pollution levels and research on the impacts of indoor particle levels on health in developing countries.     

Growth of soybean at future tropospheric ozone concentrations decreases canopy evapotranspiration and soil water depletion

Tropospheric ozone is increasing in many agricultural regions resulting in decreased stomatal conductance and overall biomass of sensitive crop species. These physiological effects of ozone forecast changes in evapotranspiration and thus in the terrestrial hydrological cycle, particularly in intercontinental interiors. Soybean plots were fumigated with ozone to achieve concentrations above ambient levels over five growing seasons in open-air field conditions. Mean season increases in ozone concentrations ([O₃]) varied between growing seasons from 22 to 37% above background concentrations. The objective of this experiment was to examine the effects of future [O₃] on crop ecosystem energy fluxes and water use. Elevated [O₃] caused decreases in canopy evapotranspiration resulting in decreased water use by as much as 15% in high ozone years and decreased soil water removal. In addition, ozone treatment resulted in increased sensible heat flux in all years indicative of day-time increase in canopy temperature of up to 0.7 °C.     

Detection of antibacterial-like activity on a silica surface: fluoroquinolones and their environmental metabolites

Background, scope, and aims

Antibacterial fluoroquinolones (FQs) are third-generation antibiotics that are commonly used as therapeutic treatments of respiratory and urinary tract infections. They are used far less in intensively farmed animal production systems, though their use may be permitted in the veterinary treatments of flocks or in medicated feeds. When used, only a fraction of ingested parent FQ actually reaches the in vivo target site of infection, while the remainder is excreted as the parent FQ and its metabolized products. In many species?? metabolism, enrofloxacin (EF) is converted into ciprofloxacin (CF) while both FQs are classified as parent FQs in human treatments. It is therefore likely that both FQs and their metabolic products will contribute to a common pool of metabolites in biological wastes. Wastes from intensive farming practices are either directly applied to agricultural land without treatment or may be temporarily stored prior to disposal. However, human waste is treated in sewage treatment plants (STPs) where it is converted into biosolids. In the storage or treatment process of STPs, FQs and their in vivo metabolites are further converted into other environmental metabolites (FQEMs) by ex vivo physicochemical processes that act and interact to produce complex mixtures of FQEMs, some of which have antibacterial-like activities. Biosolids are then often applied to agricultural land as a fertilizer amendment where FQs and FQEMs can be further converted into additional FQEMs by soil processes. It is therefore likely that FQ-contaminated biowaste-treated soils will contain complex mixtures of FQEMs, some of which may have antibacterial-like activities that may be expressed on bacteria endemic to the receiving agricultural soil environment. Concern has arisen in the scientific and in the general community that repeated use of FQ-contaminated biowaste as fertilizer amendments of nutrient-impoverished agricultural land may create a selective environment in which FQ-resistant bacteria might grow. The likelihood of this happening will depend, to some extent, on whether bioactive FQEMs are first synthesized from the parent FQs by the action and interaction of in vivo and ex vivo processes producing bioactive FQEMs in biowastes and biosolids. The postulated creation of a selective environment will also depend, in part, on whether such bioactive FQEMs are biologically available to bacteria, which may, in turn, be influenced by soil type, amendment regime, and the persistence of the bioactive FQEMs. Additionally, soil bacteria and soil processes may be affected in different ways or extents by bioactive FQEMs that could possibly act additively or synergistically at ecological targets in these non-target bacteria. This is an important consideration, since, while parent FQs have well-defined ecological targets (DNA gyrase and topoisomerase IV) and modes of bactericidal action, the FQEMs and their possible modes of action on the many different species of soil bacteria is less well studied. It is therefore understandable that there is a lack of conclusive evidence directly attributing biosolid usage to any increase in FQ-resistant bacteria detected in biowaste-amended agricultural soil. However, a lack of evidence may simply imply that a causal relationship between biosolid usage programs and any detection of low levels of FQ-resistant bacteria in soils has yet to be established, rather than an assumption of no relationship whatsoever. Based on results presented in this paper, the precautionary principle should be applied in the usage of FQ-contaminated biosolids as fertilizer amendments of agricultural land. The aim of this research was to test whether any bioactive FQEMs of EF could be synthesized by aerobic fermentation processes using Mycobacterium gilvum (American Tissue Culture Collection) and a mixed culture of microorganisms derived from an agricultural soil. High-performance thin-layer chromatography (HPTLC) and bioautography were tested as screening techniques in the detection and analysis of bioactive FQEMs.

Materials and methods

FQEMs derived from M. gilvum and mixed (soil) culture aerobic ferments were fractionated using preparative HPTLC. A standard strain of Escherichia coli was then used as the reporter organism in a bioautography assay in the detection of bioactive-FQEMs on a mid-section of the HPTLC plate. Plate sections were reassembled, and a photograph was taken under low-intensity ultraviolet (UV) light to reveal regions that contained analytes that had UV chromophores and antibacterial-like activities.

Results and discussion

Many fractionated FQEMs displayed antibacterial-like activity while bound to silica gel HPTLC plates. These results also provide evidence that sufficient quantities of biologically active FQEMs were biologically available from a silica gel surface to prevent the adherent growth of E. coli. Six to seven FQEMs derived from EF using aerobic fermentation processes had antibacterial-like activities, while two FQEMs were also detectable using UV light. Furthermore, similar banding patterns of antibacterial-like activity were observed in both the monoculture (M. gilvum) and mixed culture bioautography assays, indicating that similar processes operated in both aerobic fermentations, either producing similar biologically active FQEMs or biologically active FQEMs that had similar physicochemical properties in both ferments. The simplest explanation for these findings is that the tested agricultural soil also contained mycobacteria that metabolized EF in a similar way to the purchased standard monoculture M. gilvum. Additionally, the marked contrast between the bioautography results and the UV results indicated that the presence of UV chromophores is not a prerequisite for the detection of antibacterial-like activity.

Conclusions

A reliance on spectrophotometric techniques in the detection of bioactive FQEMs in the environment may underestimate component antibacterial-like activity and, possibly, total antibacterial-like activity expressed by EF and its FQEMs. The described bioautography method provides a screening technique with which antibacterial-like activities derived from EF and possibly other FQs can be detected directly on silica gel HPTLC plates.

Recommendations

It is recommended that both bioassay and instrumental analytical techniques be used in any measurement of hazard and risk relating to antibacterial-like activities in the environment that are derived from fluoroquinolone antibiotics and their environmental metabolites.     

Total fuel-cycle analysis of heavy-duty vehicles using biofuels and natural gas-based alternative fuels

Heavy-duty vehicles (HDVs) present a growing energy and environmental concern worldwide. These vehicles rely almost entirely on diesel fuel for propulsion and create problems associated with local pollution, climate change, and energy security. Given these problems and the expected global expansion of HDVs in transportation sectors, industry and governments are pursuing biofuels and natural gas as potential alternative fuels for HDVs. Using recent lifecycle datasets, this paper evaluates the energy and emissions impacts of these fuels in the HDV sector by conducting a total fuel-cycle (TFC) analysis for Class 8 HDVs for six fuel pathways: (1) petroleum to ultra low sulfur diesel; (2) petroleum and soyoil to biodiesel (methyl soy ester); (3) petroleum, ethanol, and oxygenate to e-diesel; (4) petroleum and natural gas to Fischer-Tropsch diesel; (5) natural gas to compressed natural gas; and (6) natural gas to liquefied natural gas. TFC emissions are evaluated for three greenhouse gases (GHGs) (carbon dioxide, nitrous oxide, and methane) and five other pollutants (volatile organic compounds, carbon monoxide, nitrogen oxides, particulate matter, and sulfur oxides), along with estimates of total energy and petroleum consumption associated with each of the six fuel pathways. Results show definite advantages with biodiesel and compressed natural gas for most pollutants, negligible benefits for e-diesel, and increased GHG emissions for liquefied natural gas and Fischer-Tropsch diesel (from natural gas).     

Towards an international standard: The ISO/DIS 18504 standard on sustainable remediation

Sustainable remediation is the elimination and/or control of unacceptable risks in a safe and timely manner while optimizing the environmental, social, and economic value of the work. Forthcoming International Organization for Standardization (ISO) Standard on Sustainable Remediation will allow countries without the capacity to develop their own guidance to benefit from work done over the past decade by various groups around the world. The ISO standard has progressed through the committee draft (ISO/CD 18504) and draft international standard (ISO/DIS 18504) stages. The risk‐based approach to managing the legacy of historically contaminated soil and groundwater has been incorporated into policy, legislation, and practice around the world. It helps determine the need for remediation and the end point of such remediation. Remediation begins with an options appraisal that short lists strategies that could deliver the required reduction in risk. A remediation strategy comprises one or more remediation technologies that will deliver the safe and timely elimination and/or control of unacceptable risks. The ISO standard will help assessors identify the most sustainable among the shortlisted, valid alternative remediation strategies. Practitioners presenting case studies claiming to constitute sustainable remediation should now report how they have aligned their work with the new standard. Indicators are used to compare alternative remediation strategies. The simplest metric that allows a characteristic to act as an indicator should be chosen. Weightings indicators can become a contested exercise and should only be undertaken where there is a clear desire for it by stakeholders and a clear need for it in identifying a preferred strategy. The simplest means of ranking alternative remediation strategies should be adopted.     

Efficiency of perchlorate consumption in road flares, propellants and explosives

When an explosive detonates or a propellant or flare burns, consumption of the energetic filler should be complete but rarely is, especially in the presence of large amounts of non-combustible materials. Herein we examine three types of perchlorate-containing devices to estimate their potential as sources of contamination in their normal mode of functioning. Road flares, rocket propellants and ammonium nitrate (AN) emulsion explosives are potentially significant anthropogenic sources of perchlorate contamination. This laboratory evaluated perchlorate residue from burning of flares and propellants as well as detonations of ammonium nitrate emulsion explosives. Residual perchlorate in commercial products ranged from 0.094 mg perchlorate per gram material (flares) to 0.012 mg perchlorate per gram material (AN emulsion explosives). The rocket propellant formulations, prepared in this laboratory, generated 0.014 mg of perchlorate residue per gram of material.     

Simulated management effects on ammonia emissions from field applied manure

A need exists to improve the utilization of manure nutrients by minimizing NH₃ emissions from land application of manure. Management strategies to reduce NH₃ emissions are available; however, few have been validated under Canadian conditions. A well tested and accurate simulation model, however, can help overcome this challenge by determining appropriate management strategies for a given set of field conditions.     

A review and test of predictive models for the bioaccumulation of radiostrontium in fish

Empirical relations between the ⁹⁰Sr concentration factor (CF) and the calcium concentration in freshwater aquatic systems have previously been determined in studies based on data obtained prior to the Chernobyl accident. The purpose of the present research is to review and compare these models, and to test them against a database of post-Chernobyl measurements from rivers and lakes in Ukraine, Russia, Belarus and Finland. It was found that two independently developed models, based on pre-Chernobyl empirical data, are in close agreement with each other, and with empirical data. Testing of both models against new data obtained after the Chernobyl accident confirms the models’ predictive ability. An investigation of the influence of fish size on ⁹⁰Sr accumulation showed no significant relationship, though the data set was somewhat limited.     

Perceptions matter: household adaptive capacity and capability in two Australian coastal communities

Regional Environmental Change - This paper presents empirical data on household perceptions of capability to adapt to climate hazards and associated capacity needs. Households play an important...