The modelling of pool vaporization

This paper describes a mathematical model which calculates the time dependencies of the flow rate and composition of the vapour emerging from a pool. A large variety of accidental cases can be covered: continuous or instantaneous spills, on confined or unconfined ground, ideal or non-ideal liquid mixtures in boiling or evaporating conditions. The boiling, when present, is modelled through an equation system comprising the Rachford-Rice relation and the energy balance of the pool, which is assumed to be well-mixed. In the case of a volatile pool, interfacial mass rates are determined taking into account the Stefan flux, and the thermal resistance inside the liquid phase is also considered. In all situations, the energy balance includes the contribution of ground, sun and air. Known experimental data have been used to validate the model.     

Intercomparison of alpha and gamma spectrometry techniques used in (210)Pb geochronology

(210)Pb geochronology is a widely used tool in sedimentological studies aimed at the absolute ages of modern sediments (up to 100 years). (210)Pb activities required to model sedimentation regimes are measured using either alpha, gamma or beta spectrometry. Sediment accumulation rates derived from (210)Pb activity profiles measured by these methods are often used interchangeably in mass balance studies. Yet there is a lack of investigations considering the comparability of data derived using different analytical methods. Differences between methods could be caused by different behaviors of (210)Pb and (210)Po (used for alpha measurement) in the marine environment. In gamma spectrometry errors may arise when many gamma emitters are measured simultaneously and their activity peaks overlap. In alpha spectrometry chemical separation of (210)Po may result in analytical error due to incomplete sample dissolution. In the present study we evaluate total, supported and excess (210)Pb activities and their use in deriving sediment accumulation rates and (210)Pb excess inventories for three sediment cores collected from the Barents Sea. (210)Pb activities derived by alpha and gamma methods are shown to agree within counting error and there is also good agreement in the derived sediment accumulation rates. The inherent compatibility of analytical results based on alpha or gamma techniques is established.     

Risk management and integrated assessment

Integrated Assessment (IA) is the pursuit of a research program generated by the limitations of traditional forms of risk management. This claim can be justified by the following argument. Over the last decades, analysts and practitioners have brought to maturity a large array of tools for risk management. Most of them rely on combining judgments of utility with judgments of probability. This is the approach of the Rational Actor Paradigm (RAP). With many environmental problems, however, RAP‐based tools have run into considerable practical and theoretical difficulties. In response to these difficulties, a series of alternative approaches to practical risk management and to the theoretical understanding of risk have been elaborated. They try to embed the rational choices of individual actors studied by RAP into a broader framework of social rationality. This task can be approached by distinguishing situations where an actor holds unambiguous judgments of preference and probability from situations characterized by ambivalent judgments. RAP can handle the former, but not the latter. Problems whose management requires a combination of widely differing scientific disciplines are especially likely to involve ambivalent judgments of probability. The study of such problems constitutes the research program of integrated assessment. It involves three main tasks: developing IA models which can represent ambivalent expectations and evaluations, developing IA models which use such representations to study non‐marginal changes of social systems, and developing procedures of participatory IA which enable researchers to engage in an iterative exchange with various stakeholders. This revised version was published online in August 2006 with corrections to the Cover Date.     

Contact Tank Design Impact on Process Performance

In this study three-dimensional numerical models were refined to predict reactive processes in disinfection contact tanks (CTs). The methodology departs from the traditional performance assessment of contact tanks via hydraulic efficiency indicators, as it simulates directly transport and decay of the disinfectant, inactivation of pathogens and accumulation of by-products. The method is applied to study the effects of inlet and compartment design on contact tank performance, with special emphasis on turbulent mixing and minimisation of internal recirculation and short-circuiting. In contrast to the conventional approach of maximising the length-to-width ratio, the proposed design changes are aimed at addressing and mitigating adverse hydrodynamic structures, which have historically led to poor hydraulic efficiency in many existing contact tanks. The results suggest that water treatment facilities can benefit from in-depth analyses of the flow and kinetic processes through computational fluid dynamics, resulting in up to 38 % more efficient pathogen inactivation and 14 % less disinfection by-product formation.     

Human Capital,Innovation, and Climate Policy: an Integrated Assessment

This paper looks at the interplay between human capital and innovation when climate and educational policies are implemented. Following recent empirical studies, human capital and general purpose research and development (R&D) are introduced in an integrated assessment model used to study the dynamics of climate change mitigation. Our results suggest that climate policy stimulates general purpose as well as clean R&D but reduces the incentive to invest in human capital formation. Both innovation and human capital have a scale effect, which increases pollution, as well as a technique effect, which saves emissions for each unit of output produced. While the energy-saving effect prevails when innovation increases, human capital is pollution-using, also because of the gross complementarity between the labor and energy input. When the role of human capital is the key input in the production of general purpose and energy knowledge is accounted for, the crowding-out of education induced by climate policy is mitigated, though not completely offset. By contrast, a policy mix that combines educational as well as climate objectives offsets the human capital crowding-out, at moderate and short-term costs. Over the long run, the policy mix leads to global welfare gains.     

Seafloor ecosystem functioning: the importance of organic matter priming

Organic matter (OM) remineralization may be considered a key function of the benthic compartment of marine ecosystems and in this study we investigated if the input of labile organic carbon alters mineralization of indigenous sediment OM (OM priming). Using ¹³C-enriched diatoms as labile tracer carbon, we examined shallow-water sediments (surface and subsurface layers) containing organic carbon of different reactivity under oxic versus anoxic conditions. The background OM decomposition rates of the sediment used ranged from 0.08 to 0.44 μmol C ml_ws⁻¹ day⁻¹. Algal OM additions induced enhanced levels of background remineralization (priming) up to 31% and these measured excess fluxes were similar to mineralization of the added highly degradable tracer algal carbon. This suggests that OM priming may be important in marine sediments.     

Introduction to the Issue

Welcome to the fifth issue of the Review of Environmental Economicsand Policy, which once again includes articles, a symposium,and a set of features. In the first of two articles in this issue, Geoffrey Heal reviewswhat we have learned about the economics of global climate changeand related public policy from the extensive literature thathas emerged in response to the controversial Stern Review ofthe Economics of Climate Change. Heal provides his own perspectiveon the Stern Review (which was the focus of a symposium in ourWinter 2008 issue) as well as his views on how the recent debateaffects the economic case for action on     

Laser induced fluorescence instrument for NO2 measurements: Observations at a central Italy background site

A laser induced fluorescence (LIF) instrument has been developed to measure tropospheric NO₂ with low detection limit. The instrument design, development and first measurements are reported. There are also details of the temporal gate system built for the fluorescence acquisition. The instrument is able to make fast measurements (up to 4 Hz) and shows a limit of detection of 10 pptv/60 s. Continuous observations (2 weeks in summer 2007) in a small town in central Italy were used to test the performance of the instrument and to study the photochemistry of ozone in a background site. LIF and a commercial chemiluminescence (CL) instrument simultaneous observations of NO₂ show a good linearity (LIF = 1.02 CL + 0.6 (ppb), R² = 0.98) but there is a bias of the commercial instrument of about 0.60 ppbv on average. The overestimation of the CL system is probably due to conversion of NO_y species into NO by the molybdenum converter used in the CL instrument to detect NO₂. Analysis of 1 s data is used to test the instrument response and the coupling between nitrogen oxides and ozone.     

Novel insights in Al-MCM-41 precursor as adsorbent for regulated haloacetic acids and nitrate from water

High concentration of NO ₃ ^? in groundwater has raised concern over possible contamination of drinking water supplies. In addition, the formation of haloacetic acids (HAAs) as by-products during disinfection with chlorine-based agents is still a relevant issue, since HAAs pose serious health hazard. In this work, we investigated the affinity of a precursor of Al-MCM-41 (a mesostructured hexagonal aluminosilicate containing the template surfactant) towards nitrate and HAAs, for its possible application in the removal of these pollutants from natural and drinking waters. Additionally, adsorption kinetics and isotherms were studied. The adsorbent was synthesized using cetyltrimethylammonium bromide as surfactant and characterized by physico?Cchemical techniques. Simulated drinking water was spiked with the EPA-regulated HAAs (monochloroacetic (MCAA), monobromoacetic (MBAA), dichloroacetic (DCAA), dibromoacetic (DBAA), and trichloroacetic (TCAA) acids) and placed in contact with the adsorbent. The effect of matrix composition was studied. Adsorption kinetic studies were performed testing three kinetics models. For the adsorption studies, three adsorption isotherm approaches have been tested to experimental data. The pollutant recoveries were evaluated by suppressed ion chromatography. The affinity of the adsorbent was TCAA = DBAA = DCAA > MBAA > MCAA with DCAA, DBAA, and TCAA completely removed. A removal as high as 77?% was achieved for 13?mg/L nitrate. The adsorption isotherms of NO ₃ ^? and monochloroacetic acid can be modeled by the Freundlich equation, while their adsorption kinetics follow a pseudo-second-order rate mechanism. The adsorbent exhibited high affinity towards HAAs in simulated drinking water even at relevant matrix concentrations, suggesting its potential application for water remediation technologies.     

An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.