The conversion of chicken manure to biooil by fast pyrolysis II. Analysis of chicken manure, biooils, and char by curie-point pyrolysis-gas chromatography/mass spectrometry (Cp Py-GC/MS)

The initial chicken manure and the three fractions derived from it by fast pyrolysis, that is, the two biooils Fractions I and II as well as the residual char were analyzed by Curie-point pyrolysis-gas chromatography/mass spectrometry (Cp Py-GC/MS). The individual compounds identified were grouped into the following six compound classes: (a) N-heterocyclics; (b) substituted furans; (c) phenol and substituted phenols; (d) benzene and substituted benzenes; (e) carbocyclics; and (f) aliphatics. Of special interest were the relatively high concentrations of N-heterocyclics in biooil Fraction II which was obtained in the highest yield and had the highest calorific value. Prominent N-heterocyclics in biooil Fraction II were methyl-and ethyl-substituted pyrroles, pyridines, pyrimidine, pyrazines, and pteridine. Also noteworthy was the high abundance of aliphatics in biooil Fraction I and the char. The alkanes and alkenes in biooil Fraction I ranged from n-C7 to n-C18 and C7:1 to C18:1, respectively, and those in the char from n-C7 to n-C19 and C7:1 to C19:1, respectively. The N-heterocyclics in the two biooil Fractions came from the chicken manure, from proteinaceous materials during fast pyrolysis or were formed during the fast pyrolysis manure conversion by the Maillard reaction which involved the formation of N-heterocyclics by amino acids interacting with sugars.     

Comparison of modeling with empirical calculation of diffuse and fugitive methane emissions in a Spanish landfill

One of the most significant environmental problems arising from landfills is the emission of methane into the atmosphere. In this study, methane emissions from a currently in-use Spanish landfill were modeled as well as being experimentally measured using a two-step method. The first step involved a qualitative walkover survey to detect where gases were being emitted on the surface of the landfill. The second stage comprised a quantitative analysis of these surface methane emissions at a selected number of points on the landfill surface using a specially designed flux chamber. The statistical analysis of the data obtained was based on the Sichel function and resulted in an average emission rate of 74.9 g·m^?2·day^?1, with 27.8 and 202.1 g·m^?2·day^?1 as the lower and upper limits of the 95% confidence interval, respectively. The total emission for the landfill, with an emitting surface of 335,000 m², is 9.16 × 10³ ton/yr. These values have been compared with those from three different models, with the model results being above the calculated mean emissions measured at the landfill, but below the upper confidence limit at 95%.

Implications: One of the main environmental problems arising from the presence of landfills is the emission of biogas (which mainly contains methane and carbon dioxide) into the atmosphere. Several experimental methods as well as models have been developed to quantify these emissions. In this work, the authors have compared the results obtained using experimental measurements with those provided by some local and international models using the default parameters proposed. The results obtained from the experimental method are in accordance with those provided by the models, although the models could be slightly overestimating these emissions.     

Altered physiology, cell structure, and gene expression of Theobroma cacao seedlings subjected to Cu toxicity

Seedlings of Theobroma cacao CCN 51 genotype were grown under greenhouse conditions and exposed to increasing concentrations of Cu (0.005, 1, 2, 4, 8, 16, and 32 mg Cu L^?1) in nutrient solution. When doses were equal or higher than 8 mg Cu L^?1, after 24 h of treatment application, leaf gas exchange was highly affected and changes in chloroplasts thylakoids of leaf mesophyll cells and plasmolysis of cells from the root cortical region were observed. In addition, cell membranes of roots and leaves were damaged. In leaves, 96 h after treatments started, increases in the percentage of electrolyte leakage through membranes were observed with increases of Cu in the nutrient solution. Moreover, there was an increase in the concentration of thiobarbituric acid-reactive substances in roots due to lipid peroxidation of membranes. Chemical analysis showed that increases in Cu concentrations in vegetative organs of T. cacao increased with the increase of the metal in the nutrient solution, but there was a greater accumulation of Cu in roots than in shoots. The excess of Cu interfered in the levels of Mn, Zn, Fe, Mg, K, and Ca in different organs of T. cacao. Analysis of gene expression via RTq-PCR showed increased levels of MT2b, SODCyt, and PER-1 expression in roots and of MT2b, PSBA, PSBO, SODCyt, and SODChI in leaves. Hence, it was concluded that Cu in nutrient solution at doses equal or above 8 mg L^?1 significantly affected leaf gas exchange, cell ultrastructure, and transport of mineral nutrients in seedlings of this T. cacao genotype.     

Aspergillus sclerotiorum lipolytic activity and its application in bioremediation of high-fat dairy wastewater environments

Oils and grease (O&G) have low affinity for water and represent a class of pollutants present in the dairy industry. Enzyme-mediated bioremediation using biocatalysts, such as lipases, has shown promising potential in biotechnology, as they are versatile catalysts with high enantioselectivity and regioselectivity and easy availability, being considered a clean technology (white biotechnology). Specially in the treatment of effluents from dairy industries, these enzymes are of particular importance as they specifically hydrolyze O&G. In this context, the objective of this work is to prospect filamentous fungi with the ability to synthesize lipases for application in a high-fat dairy wastewater environment. We identified and characterized the fungal species Aspergillus sclerotiorum as a good lipase producer. Specifically, we observed highest lipolytic activity (20.72 U g⁻¹) after 96 h of fermentation using sunflower seed as substrate. The fungal solid fermented was used in the bioremediation in dairy effluent to reduce O&G. The experiment was done in kinetic from 24 to 168 h and reduced over 90% of the O&G present in the sample after 168 h. Collectively, our work demonstrated the efficiency and applicability of fungal fermented solids in bioremediation and how this process can contribute to a more sustainable wastewater pretreatment, reducing the generation of effluents produced by dairy industries.

     

Methodology to design a municipal solid waste generation and composition map: A case study

The municipal solid waste (MSW) management is an important task that local governments as well as private companies must take into account to protect human health, the environment and to preserve natural resources. To design an adequate MSW management plan the first step consist in defining the waste generation and composition patterns of the town. As these patterns depend on several socio-economic factors it is advisable to organize them previously. Moreover, the waste generation and composition patterns may vary around the town and over the time. Generally, the data are not homogeneous around the city as the number of inhabitants is not constant nor it is the economic activity. Therefore, if all the information is showed in thematic maps, the final waste management decisions can be made more efficiently. The main aim of this paper is to present a structured methodology that allows local authorities or private companies who deal with MSW to design its own MSW management plan depending on the available data. According to these data, this paper proposes two ways of action: a direct way when detailed data are available and an indirect way when there is a lack of data and it is necessary to take into account bibliographic data. In any case, the amount of information needed is considerable. This paper combines the planning methodology with the Geographic Information Systems to present the final results in thematic maps that make easier to interpret them. The proposed methodology is a previous useful tool to organize the MSW collection routes including the selective collection. To verify the methodology it has been successfully applied to a Spanish town.     

Produced natures through the lens of biodiversity conservation and tourism: the Ponta Negra Caiçara in the Atlantic Forest Coast of Brazil

Understanding nature as an outcome of organising discourses generated through relative experiences of our surroundings has been the groundwork of a political ecology that deals with the distribution of environmental justice among people with different degrees of power. In this paper, we examine how the environmental legislation and the tourism industry have constructed the term Caiçara as a way to categorise the inhabitants of the Atlantic Forest Coast of Brazil, in ways that meet their goals, but in turn occludes the discourse of the Caiçara themselves. Ethnographic research conducted in Ponta Negra, a small coastal community located at the heart of the Juatinga Ecological Reserve (Paraty, Rio de Janeiro State), as well as a review of key legislation, management plans and tourism materials form the empirical basis of this research. First, we offer a critical examination of the historical origin of the term Caiçara. We then compare contradictory ideas of Caiçara produced by Brazilian environmental legislation and the tourism industry. While the environmental legislation has characterised the Caiçara as fallen angels who are no longer conservation allies, the tourism industry has profited by selling them as ecologically noble savages who still live in harmony with the environment. Our analysis shows how Ponta Negra people have become objects of powerful discourses of nature that hinder the recognition of their collective rights and weaken their position to negotiate for their own desires and aspirations related to their identity and livelihoods.     

Use of residual banana for polyhydroxybutyrate (PHB) production: Case of study in an integrated biorefinery

Polyhydroxybutyrate is a type of biopolymer that can be produced from hydrolyzed polysaccharide materials and could eventually replace polypropylene and polyethylene, being biodegradable, biocompatible and produced from renewable carbon sources. However, polyhydroxybutyrate is not still competitive compared to petrochemical polymers due to their high production costs. The improvement of the production processes requires a search for new alternative raw materials, design of the pretreatment technique and improvement in the fermentation and separation steps. In addition, if the polyhydroxybutyrate production is coupled into a multiproduct biorefinery it could increase the economic and environmental availability of the process through energy and mass integration strategies. In this work alternatives of energy and mass integrations for the production of polyhydroxybutyrate into a biorefinery from residual banana (an agro-industrial waste) were analyzed. The results show that the energetic integration can reduce up to 30.6% the global energy requirements of the process and the mass integration allows a 35% in water savings. Thus, this work demonstrates that energy and mass integration in a biorefinery is a very important way for the optimal use of energy and water resources hence decreasing the production cost and the negative environmental impacts.     

Large Woody Debris Input and Its Influence on Channel Structure in Agricultural Lands of Southeast Brazil

Riparian forests are important for the structure and functioning of stream ecosystems, providing structural components such as large woody debris (LWD). Changes in these forests will cause modifications in the LWD input to streams, affecting their structure. In order to assess the influence of riparian forests changes in LWD supply, 15 catchments (third and fourth order) with riparian forests at different conservation levels were selected for sampling. In each catchment we quantified the abundance, volume and diameter of LWD in stream channels; the number, area and volume of pools formed by LWD and basal area and tree diameter of riparian forest. We found that riparian forests were at a secondary successional stage with predominantly young trees (diameter at breast height <10 cm) in all studied streams. Results showed that basal area and diameter of riparian forest differed between the stream groups (forested and non-forested), but tree density did not differ between groups. Differences were also observed in LWD abundance, volume, frequency of LWD pools with subunits and area and volume of LWD pools. LWD diameter, LWD that form pools diameter and frequency of LWD pools without subunits did not differ between stream groups. Regression analyses showed that LWD abundance and volume, and frequency of LWD pools (with and without subunits) were positively related with the proportion of riparian forest. LWD diameter was not correlated to riparian tree diameter. The frequency of LWD pools was correlated to the abundance and volume of LWD, but characteristics of these pools (area and volume) were not correlated to the diameter of LWD that formed the pools. These results show that alterations in riparian forest cause modifications in the LWD abundance and volume in the stream channel, affecting mainly the structural complexity of these ecosystems (reduction in the number and structural characteristics of LWD pools). Our results also demonstrate that riparian forest conservation actions must consider not only its extension, but also successional stage to guarantee the quantity and quality of LWD necessary to enable the structuring of stream channels.