Chelate-induced phytoextraction of metal polluted soils with Brachiaria decumbens

Chelate-induced phytoextraction with high biomass plant species has been proposed for the clean-up of heavy metal polluted soils. In the current work, the effect of the application of two different chelating agents, i.e. EDTA and EDDS, on the metal phytoextraction capacity of Brachiaria decumbens was studied. Although EDTA was, in general, more effective in soil metal solubilization, EDDS, a chelate less harmful to the environment, was more efficient inducing metal accumulation in B. decumbens shoots than EDTA. Indeed, in a moderately heavy metal polluted soil, EDDS caused a 2.54, 2.74 and 4.30-fold increase in Cd, Zn, and Pb shoot metal concentration, respectively, as compared to control plants. In this same soil, EDTA caused a 1.77, 1.11 and 1.87-fold increase in Cd, Zn, and Pb shoot metal concentration, respectively, as compared to control plants. EDDS was also more effective than EDTA in stimulating the translocation of metals from roots to shoots. B. decumbens plants were able to grow in the metal polluted soils showing no visible symptoms of phytotoxicity, which suggests their metal tolerance. Finally, B. decumbens, a fast-growing, high biomass, aluminum tolerant plant species, that has a well-established agronomic system, fulfills most of the requirements for chemically-induced phytoextraction.     

Soil remediation time to achieve clean-up goals II: Influence of natural organic matter and water contents

This work reports a relatively rapid procedure for the forecasting of the remediation time (RT) of sandy soils contaminated with cyclohexane using vapour extraction. The RT estimated through the mathematical fitting of experimental results was compared with that of real soils. The main objectives were: (i) to predict the RT of soils with natural organic matter (NOM) and water contents different from those used in experiments; and (ii) to analyse the time and efficiency of remediation, and the distribution of contaminants into the soil matrix after the remediation process, according to the soil contents of: (ii1) NOM; and (ii2) water. For sandy soils with negligible clay contents, artificially contaminated with cyclohexane before vapour extraction, it was concluded that: (i) if the NOM and water contents belonged to the range of the prepared soils, the RT of real soils could be predicted with relative differences not higher than 12%; (ii1) the increase of NOM content from 0% to 7.5% increased the RT (1.8-13 h) and decreased the remediation efficiency (RE) (99-90%) and (ii2) the increase of soil water content from 0% to 6% increased the RT (1.8-4.9 h) and decreased the RE (99-97%). NOM increases the monolayer capacity leading to a higher sorption into the solid phase. Increasing of soil water content reduces the mass transfer coefficient between phases. Concluding, NOM and water contents influence negatively the remediation process, turning it less efficient and more time consuming, and consequently more expensive.     

Biotransformation, stress and genotoxic effects of 17beta-estradiol in juvenile sea bass (Dicentrarchus labrax L.)

The effects of 17beta-estradiol (E(2)) on fish became a matter of concern, since significant levels of this hormone were detected in the aquatic environment released mainly by domestic sewage treatment plants. In this perspective, the current study was focused on E(2) effects upon biotransformation, stress and genotoxic responses of juvenile Dicentrarchus labrax L. (sea bass). Fish were exposed to E(2) during 10 days in two different ways: water diluted (200 ng/L or 2,000 ng/L) and i.p. injected (0.5 mg/kg or 5 mg/kg). A battery of biological responses was evaluated: liver ethoxyresorufin-O-deethylase (EROD) and alanine transaminase (ALT) activities, liver somatic index (LSI), plasma cortisol, glucose and lactate concentrations, as well as erythrocytic nuclear abnormalities (ENA). All the exposure conditions induced endocrine disruption, measured as plasma cortisol decrease, and genotoxicity, measured as ENA increase. Thus, no differences were detected either between different exposure routes or tested concentrations. Concerning liver EROD and ALT activities, as well as plasma glucose and lactate concentrations no differences were found between treated and control groups. LSI was the only parameter to respond differently in the two exposure routes, as only E(2) water diluted induced a significant increase in this hepatic indicator.     

Source separation-driven reverse logistics in MSW management

The research reported here characterizes municipal solid waste in terms of the quantity produced as a function of time and pre-sorting as well as post-sorting composition in a municipality with 90,000 inhabitants located in Central Brazil. It pursues the objective of identifying the basic strategy of a municipal solid waste management model specific to household waste. It shows that sorted-waste composition, and not raw waste composition, drives reverse logistics. The household waste production rate is 45 tons per day. The research provides data on the base case of progressive annual tipping rates without a diversion target. It goes on to determine a landfill diversion potential of 67 % of domestic waste produced, based on sorted waste composition data. Annual progress indicators required to reach this potential within a chosen timeframe are detailed. Reverse logistics capacity is identified and found sufficient to remove all inert waste items separated at the source. The necessary logistics for biodegradable matter, based on decentralized composting tests, is outlined. The challenge of the municipal administration is identified as the promotion of source separation, and the funds required for this undertaking are shown to derive from the correspondingly reduced landfill maintenance.     

Landscape evaluation: comparison of evaluation methods in a region of Spain

Landscape evaluation is now widely recognised as a powerful, interdisciplinary, environmental research method. The aim of the present work was to compare two landscape evaluation methods as part of a physical planning process: the cartographic assessment method and the in situ assessment method. This comparison was performed using an area of the Montes de Toledo, in the centre of Spain. Both methods provided similar results for the majority of the landscape units studied. This shows that the cartographic method can be successfully used in landscape evaluation, allowing important savings in terms of fieldwork. However, this is only the case when the information provided by the available maps is sufficiently accurate to allow the correct assignment of coefficients by a panel of experts.     

Application and sensitivity testing of a eutrophication assessment method on coastal systems in the United States and European Union

The Assessment of Estuarine Trophic Status (ASSETS) screening model has been extended to allow its application to both estuarine and coastal systems. The model, which combines elements of pressure, state and response, was tested on four systems: Maryland Coastal Bays and Long Island Sound in the United States and The Firth of Clyde (Scotland) and Tagus Estuary (Portugal) in the European Union. The overall scores were: Maryland Coastal Bays: Bad; Firth of Clyde: Poor; Tagus Estuary: Good. Long Island Sound was modelled along a timeline, using 1991 data (score: Bad) and 2002 data (score: Moderate). The improvement registered for Long Island Sound is a consequence of the reduction in nutrient loading, and the ASSETS score changed accordingly. The two main areas where developments are needed are (a) In the definition of type-specific ranges for eutrophication parameters, due to the recognition that natural or pristine conditions may vary widely, and the use of a uniform set of thresholds artificially penalizes some systems and potentially leads to misclassification; (b) In the definition and quantification of measures which will result in an improved state through a change in pressures, as well as in the definition of appropriate metrics through which response may be assessed. One possibility is the use of detailed research models where different response scenarios potentially produce changes in pressure and state. These outputs may be used to drive screening models and analyze the suitability of candidate metrics for evaluating management options.     

Environmental performance policy indicators for the public sector: the case of the defence sector

The development of environmental performance policy indicators for public services, and in particular for the defence sector, is an emerging issue. Despite a number of recent initiatives there has been little work done in this area, since the other sectors usually focused on are agriculture, transport, industry, tourism and energy. This type of tool can be an important component for environmental performance evaluation at policy level, when integrated in the general performance assessment system of public missions and activities. The main objective of this research was to develop environmental performance policy indicators for the public sector, specifically applied to the defence sector. Previous research included an assessment of the environmental profile, through the evaluation of how environmental management practices have been adopted in this sector and an assessment of environmental aspects and impacts. This paper builds upon that previous research, developing an indicator framework--SEPI--supported by the selection and construction of environmental performance indicators. Another aim is to discuss how the current environmental indicator framework can be integrated into overall performance management. The Portuguese defence sector is presented and the usefulness of this methodology demonstrated. Feasibility and relevancy criteria are applied to evaluate the set of indicators proposed, allowing indicators to be scored and indicators for the policy level to be obtained.     

Effect of Casting Process Conditions on Mechanical Properties and Water Solubility of Films Made from Wolf Fruit and Its Optimization

Journal of Polymers and the Environment - Biodegradable films based on wolf fruit flour were prepared by the casting process using glycerol as a plasticizing agent. The influence that the process...     

The Effect of UV-B Irradiation on the Biodegradability of Poly-β-Hydroxybutyrate (PHB) and Poly-ɛ-Caprolactone (PCL)

The biodegradability of poly--hydroxybutyrate and poly--caprolactone in soil compostage before and after irradiation of the polymers for 192, 425, and 600 h in a Weather-Ometer was examined. The biodegradability tests were done in soil compostage at pH 7.0, 9.0, and 11.0 to assess the influence of this parameter on degradation. The rate of degradation was directly proportional to the soil alkalinity. Poly--hydroxybutyrate showed the greatest weight loss and aging in a Weather-Ometer did not significantly increase the biodegradation, except when the polymer was aged for 425 h and buried in soil compostage of pH 11.0.     

Buoyancy measurements and vertical distribution of eggs of sardine (<Emphasis Type="Italic">Sardina pilchardus</Emphasis>) and anchovy (<Emphasis Type="Italic">Engraulis encrasicolus</Emphasis>)

Measurements were made of the density and settling velocity of eggs of sardine (Sardina pilchardus) and anchovy (Engraulis encrasicolus), using a density-gradient column. These results were related to observed vertical distributions of eggs obtained from stratified vertical distribution sampling in the Bay of Biscay. Eggs of both species had slightly positive buoyancy in local seawater throughout most of their development until near hatching, when there was a marked increase in density and they became negatively buoyant. The settling velocity of anchovy eggs, which are shaped as prolate ellipsoids, was close to predictions for spherical particles of equivalent volume. An improved model was developed for prediction of the settling velocity of sardine eggs, which are spherical with a relatively large perivitelline volume; this incorporated permeability of the chorion and adjustment of the density of the perivitelline fluid to ambient seawater. Eggs of both species were located mostly in the top 20 m of the water column, in increasing abundance towards the surface. A sub-surface peak of egg abundance was sometimes observed at the pycnocline, particularly where this was pronounced and associated with a low-salinity surface layer. There was a progressive deepening of the depth distributions for successive stages of egg development. Results from this study can be applied for improved plankton sampling of sardine and anchovy eggs and in modelling studies of their vertical distribution.Communicated by J.P. Thorpe, Port Erin