精密模锻件的设计要点

讨论了精密模锻件的分类密集形状的锻件、盘形锻件和长杆形锻件 ,以及精密模锻件的设计要点精密模锻件的机械加工余量、尺寸精度和表面粗糙度、分模面的选择、模锻斜度、圆角半径、肋的设计和腹板厚度的设计     

欧拉观测的大气扩散参数计算方法探析及应用

根据湍流扩散统计理论，讨论了利用欧拉观测的风速资料求解正态扩散模式中大气扩散参数的计算方法及其实现，并以海南洋埔开关区各稳定度大气扩散参数的计算为实例作了分析。     

膜生物反应器处理生活污水无泡供氧的研究

用疏水性微孔膜制成的供氧器，向水溶液或发酵液供氧时，无气泡产生，这种无泡式供氧方式突破了传统的泡式供氧模式，具有传氧效率高，无泡沫产生和动力消耗低等优点。在膜生物反应器中用无泡式供氧进行生活污水处理试验研究。结果表明，COD，BOD5、NH3－N、浊度去除率分别达95％、94％和99％，对SS和大肠杆菌去除率达100％。     

生态经济论

本文按生态发展历史进程，论述了，论述了生态经济发展的必然性。     

用CBMN法评价4-氯酚与富里酸对CHO细胞的毒性效应

用ＣＨＯ细胞和ＣＢＭ法对４－ＣＰ（４－氯）及春ＦＡ协同作用的细胞毒性效应进行了评价,选用的细胞学毒性参数为总微核率（ＭＮ）、含微核的双核细胞率（ＢＮＭＮ）、核分鲜明指数（ＮＯＩ）和南分裂阻断增殖指数（ＣＢＰＩ）,结果表明：ＦＡ单独处理与阴性对照组比较不引起显著性差异;４－Ｃ客ＦＡ联合处理与４－ＣＰ各浓度分别处理相比有显著性的差异;对于ＢＮＭＮ和ＮＤＩ,Ｐ〈０．０１;对于ＭＮ和ＣＢＰＩ,Ｐ〈０．０５     

Particle number size distribution and new particle formation: New characteristics during the special pollution control period in Beijing

New particle formation is a key process in shaping the size distribution of aerosols in the atmosphere.We present here the measurement results of number and size distribution of aerosol particles (10-1...     

Ambient volatile organic compounds pollution in China

Owing to rapid economic and industrial development, China has been suffering from degraded air quality and visibility. Volatile organic compounds (VOCs) are important precursors to the formation of ground-level ozone and hence photochemical smog. Some VOCs adversely affect human health. Therefore, VOCs have recently elicited public concern and given new impetus to scientific interest. China is now implementing a series of polices to control VOCs pollution. The key to formulating policy is understanding the ambient VOCs pollution status. This paper mainly analyzes the species, levels, sources, and spatial distributions of VOCs in ambient air. The results show that the concentrations of ambient VOCs in China are much higher than those of developed countries such as the United States and Japan, especial benzene, which exceeds available standards. At the same time, the ozone formation potential (OFP) and secondary organic aerosol formation potential (SOAFP) of various VOCs are calculated. Aromatics and alkenes have much higher OFPs, while aromatics have higher SOAFP. The OFPs of ambient VOCs in the cities of Beijing, Guangzhou and Changchun are very high, and the SOAFP of ambient VOCs in the cities of Hangzhou, Guangzhou and Changchun are higher.     

钢渣处理技术的环境性能比较

随着钢铁工业的快速发展,大量钢渣弃置堆积,不仅成为环境污染源,而且占用大量的土地。目前钢渣处理技术较多,其中主要的处理方法有冷弃法、热闷法、热泼法、浅盘法、水淬法、风淬法等。本研究采用生命周期评价方法,对主要钢渣处理技术进行评估,定义了生命周期评估边界和清单指标,建立了清单计算模型,得到了不同钢渣处理技术的生命周期清单。为了提高结果的可信性,对模型进行了不确定性分析。结果表明滚筒法和风淬法的环境性能较好,是值得推广的钢渣处理技术。     

Characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China

To understand the pollution characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China, total suspended particulate(TSP) and PM10samples were collected in cities of Changsha, Zhuzhou and Xiangtan from December 2011 to January 2012, and heavy metals of Cd, Pb, Cr, and As were analyzed. It shows that the average TSP concentration in Changsha, Zhuzhou and Xiangtan were(183 ± 73),(201 ± 84) and(190 ± 66) μg/m3respectively, and the average PM10 were(171 ± 82),(178 ± 65) and(179 ± 55) μg/m3respectively. The lowest TSP and PM10concentrations occurred at the background Shaping site of Changsha. The average ratio of ρ(PM10)/ρ(TSP) was 91.9%, ranging from 81.3% to 98.9%. Concerning heavy metals, in TSP samples, the concentration of Cr, As, Cd and Pb were 28.8–56.5, 18.1–76.3, 3.9–26.1 and 148.0–460.9 ng/m3, respectively, while in PM10samples, were 16.4–42.1, 15.5–67.9, 3.3–22.2 and 127.9–389.3 ng/m3, respectively. The enrichment factor of Cd was the highest, followed by Pb and As, while that of Cr was the lowest.     

大辽河水系主要污染物特征分析

对大辽河流域主要污染物CODMn(或CODCr)和氨氮多年时空变化特征进行分析,认为二者浓度在空间上都有从上游到下游显著升高的趋势,年内变化呈现明显的点源特征。