内循环式生物反应器氧传质及流态特性研究

通过气-液两相普通流化床和内循环式生物反应器(DTBR)的对比研究,发现DTBR具有更好的氧传质能力和氧转移效率。本试验条件下,当表面气速为0.29cm/s时,DTBR的(KLα)20和E4值分别为普通流化床反应器的1.2倍和1.3倍。通过研究影响DTBR混合特性的主要因素,发现表面气速的影响最大,表面液速的影响最小。其它条件相同,表面气速分别为0.29和0.074cm/s时,DTBR的循环时间分别为12s和16s,混合时间分别为76.2s和91.8s。      

O_3-H_2O_2催化氧化技术深度处理石化含盐废水

采用O_3-H_2O_2-催化剂氧化体系对某石化企业含盐废水的二级生化出水进行处理,考察了不同反应体系下的反应时间、O_3流量、H_2O_2投加量对COD去除效果的影响。实验结果表明:O_3-H_2O_2-催化剂氧化体系对石化含盐废水的处理效果最好;在臭氧流量为40 m L/min、H_2O_2投加量为50 mg/L、催化剂投加量为300 g/L、反应时间为60 min的条件下,COD去除率为51.4%,出水COD为52.0 mg/L,达到GB31570—2015《石油炼制工业污染物排放标准》的要求。     

Coupling coordination measurement of environmental governance: case of China

Environmental and Ecological Statistics - The results show that a comprehensive evaluation system consisting of natural resources, pollution response, government management, and legal involvement...     

燃煤电厂烟气中铅的测定方法初探

采用过滤法与吸收法联用的采样方法,测定燃煤电厂烟气中Pb,并通过试验考察4种不同的吸收液和4种不同采样流量对测定的影响。结果表明:0.1 mol/L HNO_3、体积分数为5%的HNO_3+10%的H_2O_2和体积分数为1.6%的HNO_3+2.5%的HCl 3种吸收液均对Pb起到良好的捕集作用,且测定结果相近。采样流量控制在20 L/min吸收效果最好。     

微电解联合物化法处理维生素B12难降解废水的研究

对使用微电解联合物化法处理维生素B12难降解废水进行了分析。通过实验研究了微电解联合物化法处理维生素B12废水的最佳工艺条件。在最佳工艺条件下,维生素B12废水色度去除达88.46%,COD去除率达到71.06%。该处理方法最后将污染物质直接吸附于改性膨润土上,不产生浓缩废水、酸碱废水等更加难以处理的废水,并且不带入有毒有害物质,可以有效降低水中污染物含量,减少后续生物处理设备的污染负荷。     

Preparation and Properties of Thermoplastic Starch/Montmorillonite Nanocomposite Using N-(2-Hydroxyethyl)formamide as a New Additive

N-(2-Hydroxyethyl)formamide (HF) was synthesized efficiently and used as a new additive to prepare thermoplastic starch/montmorillonite nanocomposite (TPS/MMT). Here, HF acted as both plasticizer for TPS and swelling agent for MMT. The hydrogen bond interaction among HF, starch and MMT was proven by Fourier-transform infrared (FT-IR) spectroscopy. By scanning electron microscope (SEM), starch granules were completely disrupted. Atomic force microscopy demonstrated that partially exfoliated TPS/MMT nanocomposite was formed. The crystallinity of corn starch, MMT, HF-plasticized TPS (HTPS) and TPS/MMT nanocomposite was characterized by X-ray diffraction (XRD). Thermal stability of HTPS and TPS/MMT was determined by thermogravimetric analysis (TGA). The water resistance of TPS/MMT nanocomposite increased compared with that of pure HTPS. Tensile strengths of TPS/MMT nanocomposites were higher than those of HTPS, but just the reverse for elongations at break.     

Implementing China's circular economy concept at the regional level: a review of progress in Dalian, China

The circular economy (CE) concept was introduced in China to address environmental degradation and resource scarcity associated with rapid economic development. Chosen as a demonstration city, Dalian has implemented the CE strategy as a means of conserving water, materials, energy and land. This paper outlines some of the regional CE initiatives that have been successful to date in Dalian, including those focusing on conserving energy and water resources and others focusing on reduced industrial emissions. The paper details the approach used in implementing the CE concept in Dalian, tracing the foci and goals of the program, and the sectoral approach used to implement a CE. Although Dalian municipality has achieved many successes in implementing a CE, our paper identifies several challenges that, until recently, have held back complete implementation. These include: the lack of incentives for older industries to 'green' their operations, the lack of financial support to expand the CE concept, and a broad-based need for heightened public awareness and participation in CE initiatives. Our paper then identifies several responses by Dalian municipality to overcome these challenges, including pricing and tax reforms that serve as conservation incentives, the provision of financial support for CE promotion through budget reorganization, and the organization of CE training programs. Our paper concludes that, although CE initiatives have been successful in Dalian, more is possible and more is needed before Dalian can be designated a true 'eco-city'. The approach used by Dalian can provide guidance for other Chinese cities, although it is recognized that each city must tailor its own approach for differing contexts and conditions.     

突变灰盖鬼伞过氧化物酶降解刚果红的响应面法优化分析

酶法降解偶氮染料刚果红是一个复杂的过程,受温度、pH、酶量、刚果红浓度和双氧水浓度显著影响。为研究各因素及因素间交互作用对刚果红降解影响,提高刚果红的降解率,分别使用单因素法和响应面分析法对刚果红降解条件进行了优化。单因素实验结果显示灰盖鬼伞过氧化物酶降解刚果红的最适条件为：pH5．0、32℃、酶量4．98u、双氧水0．1mmol／L、刚果红20mg／L,此时刚果红最高降解率为34．84％。然后选双氧水浓度、刚果红浓度和灰盖鬼伞过氧化物酶量作为3个因素,通过中心组合设计实验,用响应面法对刚果红降解进行优化分析,最后得到一个拟合度良好的二次多项方程模型（R2=0．9900）。方差分析结果显示,刚果红浓度和酶量是影响最显著的因素,双氧水与酶以及染料与酶之间的交互作用极显著。响应面分析优化后的反应体系为：双氧水浓度0．15mmol／L,刚果红浓度为27．21mg／L,酶为2．07U,在此条件下,刚果红降解率达58．13％。     

改性矿物吸附法和 O3氧化法对维生素 B12废水脱色处理简

采用改性矿物吸附法和O₃氧化法对某制药厂维生素B₁₂废水进行脱色处理。以废水色度去除率大于50%为目的,通过实验确定改性矿物吸附法和O₃氧化法处理维生素B₁₂废水的最佳工艺条件：废水的pH为3.00,有机化膨润土的投加量为5 g/L,PAC的投加量为6 g/L,投加有机化膨润土后搅拌时间为30 min时,废水的色度去除率可达到51.3%,处理成本为12.85元/t。O₃氧化法的最佳条件：废水的pH保持不变,O₃流量为5 g/h,反应时间为2 min,废水的色度去除率可达到68.8%,处理成本为0.96元/t。对比这2种方法,O₃氧化法处理该废水成本更低、效率更高,并且能提高废水的可生化性以便后续处理。     

混凝法去除城市生活污水中抗性基因

采用聚合氯化铝(PACl)和聚合硫酸铁(PFS)混凝处理城市生活污水(格栅出水和二级出水),考察混凝剂投加量、p H值对污水中抗生素抗性基因(ARGs)的去除率影响。结果表明,随着PACl和PFS投加量的增加,污水中目标基因的去除率先升高后降低;在p H 3~10的范围内,PACl对目标基因的去除效果随p H值的增加而降低,PFS对目标基因的去除随着p H值的增加先升高后降低。对于格栅出水,PACl和PFS的最佳投加量为400 mg/L,基因的去除率分别达到2.33~2.97 log和0.98~2.11 log,对于二级出水,PACl和PFS的最佳投加量分别为200 mg/L和150 mg/L,基因的去除率分别为1.85~2.64log、1.81~2.46 log;混凝去除最优p H条件分别为p H=3(投加PACl)及p H=5~6(投加PFS)。PACl的处理效果优于PFS。