用改性活性碳纤维去除CO2原料气中的H2S

采用固定床动态吸附实验，用改性活性碳纤维（ACF）吸附去除CO2原料气中的H2S。通过改变改性剂种类、反应温度和原料气中CO2浓度，找出用改性ACF去除CO2原料气中H2S的规律。实验结果表明：常温下，可用NaON改性的ACF来消除CO2的酸性对去除H2S的不利影响；随着反应温度的升高，CO2与ACF形成的C（O＊）中间产物增多，CO2的存在有利于改性ACF去除H2S；而当反应温度过高时，CO2与ACF形成的C（O＊）中间产物发生分解，导致ACF碳化，不利于H2S的吸附去除。     

Present status of the recycling of waste electrical and electronic equipment in Korea

In Korea due to rapid economical growth followed by urbanisation, breakage of large traditional families into small nuclear families, continuous changes in equipment features and capabilities causes tremendous increase in sale of new electrical and electronic equipment (EEE) and decrease in sale of used EEE. Subsequently, the ever-increasing quantity of waste electrical and electronic equipment (WEEE) has become a serious social problem and threat to the environment. Therefore, the gradual increase in the generation of WEEE intensifies the interest for recycling to conserve the resources and protect the environment. In view of the above, a review has been made related to the present status of the recycling of waste electrical and electronic equipment in Korea. This paper describes the present status of generation and recycling of waste electrical and electronic equipment, namely TVs, refrigerators, washing machines, air conditioners, personal computers and mobile phones in Korea. The commercial processes and the status of developing new technologies for the recycling of metallic values from waste printed circuit boards (PCBs) is also described briefly. Since 1998, three recycling centers are in full operation to recycle WEEE such as refrigerators, washing machines and air conditioners, having the total capacity of 880,000 units/year. All waste TVs are recently recycled on commission basis by several private recycling plants. The recycling of waste personal computers and mobile phones is insignificant in comparison with the amount of estimated obsolete those. Korea has adopted and enforced the extended producer responsibility (EPR) system. Korea is making consistent efforts to improve the recycling rate to the standards indicated in the EU directives for WEEE. Especially environmentally friendly and energy-saving technologies are being developed to recycle metal values from PCBs of WEEE.     

Highly selective capture of phosphate ions from water by a water stable metal-organic framework modified with polyethyleneimine

Environmental Science and Pollution Research - In this work, a series of polyethyleneimine (PEI) impregnated metal-organic framework (UiO-66) with varying PEI loadings were prepared and applied as...     

地裂缝上框架结构的抗震性能分析

地裂缝是严重影响我国人类生活、生产建设的主要地质灾害之一,是一种独特的地质灾害,近年来已引起人们的关注,它广泛分布于全国许多地方。框架结构是一种广泛使用的结构形式。由于人类活动或地质构造运动形成地裂缝,进而造成房屋开裂或倾斜。该文针对位于抗震设防区的框架结构房屋,分别用底部剪力法和PKPM静力分析法,来定量研究在地裂缝影响下框架结构的抗震性能,为双重灾害影响下结构抗震鉴定加固提供依据。     

三维点云基础上排土场垮塌影响范围研究

高台阶排土场下游常分布有居民区、厂房等,一旦垮塌,后果严重,因此完善的防治与应急准备工作十分关键,而排土场垮塌影响范围的预测是这些工作的重要前提依据。为提升高台阶排土场垮塌影响范围的预测准确性,需要获取准确的地形边界基础数据。通过利用三维激光扫描仪对新建排土场及其下游地形精细扫描,对获取的三维点云数据去噪、拼接、建模等处理,生成精度更高的数字高程模型与三维实体模型。在此基础上,结合新建高台阶排土场地质勘查与设计资料,建立颗粒离散元数值模型,利用PFC3D计算高台阶排土场垮塌影响范围,并与经验公式法计算结果对比分析,结果表明排土场颗粒离散元数值模型精度符合要求,可快速、准确地计算影响范围,从而为相关部门提供科学决策依据。