Laboratory investigation of three distinct emissions monitors for hydrochloric acid

The measurement of hydrochloric acid (HCl) on a continuous basis in coal-fired plants is expected to become more important if HCl standards become implemented as part of the Federal Mercury and Air Toxics Standards (MATS) standards that are under consideration. For this study, the operational performance of three methods/instruments, including tunable diode laser absorption spectroscopy (TDLAS), cavity ring down spectroscopy (CRDS), and Fourier transform infrared (FTIR) spectroscopy, were evaluated over a range of real-world operating environments. Evaluations were done over an HCl concentration range of 0–25 ppmv and temperatures of 25, 100, and 185 °C. The average differences with respect to temperature were 3.0% for the TDL for values over 2.0 ppmv and 6.9% of all concentrations, 3.3% for the CRDS, and 4.5% for the FTIR. Interference tests for H₂O, SO₂, and CO, CO₂, and NO for a range of concentrations typical of flue gases from coal-fired power plants did not show any strong interferences. The possible exception was an interference from H₂O with the FTIR. The instrument average precision over the entire range was 4.4% for the TDL with better precision seen for concentrations levels of 2.0 ppmv and above, 2.5% for the CRDS, and 3.5% for the FTIR. The minimum detection limits were all on the order of 0.25 ppmv, or less, utilizing the TDL values with a 5-m path. Zero drift was found to be 1.48% for the TDL, 0.88% for the CRDS, and 1.28% for the FTIR.

Implications: This study provides an evaluation of the operational performance of three methods/instruments, including TDL absorption spectroscopy (TDLAS), cavity ring down spectroscopy (CRDS), and FTIR spectroscopy, for the measurement of hydrochloric acid (HCl) over a range of real-world operating environments. The results showed good instrument accuracy as a function of temperature and no strong interferences for flue gases typical to coal-fired power plants. The results show that these instruments would be viable for the measurement of HCl in coal-fired plants if HCl standards become implemented as part of the Federal Mercury and Air Toxics Standards (MATS) standards that are under consideration.     

Species richness,structure, and conservation of <Emphasis Type="Italic">Nitraria retusa</Emphasis> communities in the coastal salt marshes of Kuwait

Although the coastal salt marshes of Arabian Gulf have been altered extensively by human development activities, there is a paucity of data describing changes in the distribution and abundance of native coastal plant communities. The main objectives of this study are to determine vegetation condition, size structure, and conservation status of Nitraria retusa, a medicinal and salt-tolerant shrub, in disturbed and non-disturbed coastal salt marshes of Kuwait. Size measurements of Nitraria shrubs and nabkas, which are mounds of sediment developed around shrubs, were carried out in 50 quadrats (20 × 20 m²), randomly selected inside and outside Sabah Al-Ahmad Natural Reserve. Species richness and soil properties of nabkas and interspaces, the open areas between the nabkas, were also measured. The results revealed that nabkas of Nitraria in non-disturbed sites are more stable and rich in plant diversity than those in disturbed sites. Mean height and mean canopy diameter of Nitraria shrubs, total plant cover, and species richness are significantly higher in non-disturbed sites than disturbed sites, which indicate the positive influences of conservation for long term on vegetation structure and species richness. The results of soil analyses indicate the important role of nabkas in providing refuges for plant life and species diversity. The present study indicates that more than 50 % of the N. retusa community has been lost during the last few decades. Therefore, N. retusa should be considered an endangered species in Kuwait. The reduction in vegetation cover, a decline in species richness, and the overall degradation of salt marshes are attributed to human development activities along the coast of Kuwait. Effective conservation actions for threatened species in degraded coastal salt marshes of this region include establishment of protective enclosures, prohibitions on development that adversely affects native plant communities, and the planting native salt-tolerant shrubs to facilitate regeneration.     

Does social justice knowledge matter? Education for sustainable development and student attitudes

Recent conjecture on the potential primacy of physical environmental components in education for sustainable development (ESD) efforts serves to question the centrality of social justice education as a component of ESD. This research explores a sustainable development student’s basic knowledge of social justice conditions in their country of residence and its relationships to policy attitudes that should be of importance to ESD, including beliefs about the importance of corporate social responsibility, their endorsement of gross national product as an effective measure of progress, their overall assessment of the social fairness of current national social justice policy, and their endorsement of the goals of Occupy Wall Street. Results obtained using path-model hypothesis testing indicate that accuracy of knowledge of US standing on social justice issues is significantly related to these policy attitudes, providing support for social justice content in ESD endeavors to create students empowered for engagement in broader policy goals.     

Comparative study on effect of blending,thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al₂O₃) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.     

Connecting the dots: mapping habitat connectivity for tigers in central India

Large connected landscapes are paramount to maintain top predator populations. Across their range, tiger (Panthera tigris) populations occur in small fragmented patches of habitat, often isolated by large distances in human-dominated landscapes. We assessed connectivity between 16 protected areas (PAs) in central India, a global priority landscape for tiger conservation, using data on land use and land cover, human population density, and transportation infrastructure. We identified and prioritized movement routes using a combination of least-cost corridor modeling and circuit theory. Our analyses suggest that there are several opportunities to maintain connectivity in this landscape. We mapped a total of thirty-five linkages in the region and calculated metrics to estimate their quality and importance. The highest quality linkages as measured by the ratio of cost-weighted distance to Euclidean distance are Kanha–Phen/Bandhavgarh–SanjayGhasidas/Melghat–Satpura, and cost-weighted distance to least-cost path length are Nawegaon–Tadoba/Achanakmar–SanjayGhasidas/Kanha–Phen. We used current flow centrality to evaluate the contribution of each PA and linkage toward facilitating animal movement. Values are highest for Kanha and Pench tiger reserves, and the linkages between Kanha–Phen, Kanha–Pench, and Pench–Satpura, suggesting that these PAs and linkages play a critical role in maintaining connectivity in central India. In addition, smaller areas such as Bor, Nawegaon, and Phen have high centrality scores relative to their areas and thus may act as important stepping stones. We mapped pinch points, which are sections of the linkages where tiger movement is restricted due to unfavorable habitat, transportation networks, human habitation, or a combination of factors. Currently, very limited data exist on tiger movement outside of PAs to validate model results. Regional-scale connectivity mapping efforts can assist managers and policy makers to develop strategic plans for balancing wildlife conservation and other land uses in the landscape.     

Biomagnification of naturally-produced methoxylated polybrominated diphenyl ethers (MeO-PBDEs) in harbour seals and harbour porpoises from the Southern North Sea

Harbour seals and harbour porpoises are top predator species from the North Sea, have long life spans and hence, are known to accumulate high levels of anthropogenic contaminants. To gain knowledge about the behaviour of naturally-produced compounds in these marine mammals, the biomagnification of naturally-produced methoxylated polybrominated diphenyl ethers (MeO-PBDEs) was assessed. The biomagnification of MeO-PBDEs (2′-MeO-BDE 68 and 6-MeO-BDE 47) was lower in harbour seals (all biomagnification factors (BMFs) < 1) compared to the same age–gender groups of the harbour porpoises (all BMFs > 1). This may indicate a better metabolic breakdown of MeO-PBDEs in harbour seals, as was previously suggested for polybrominated diphenyl ethers (PBDEs). In both predators, 6-MeO-BDE 47 had the highest concentrations (range: 45–483 ng/g lw and 2–38 ng/g lw for harbour porpoises and seals, respectively) compared to 2′-MeO-BDE 68 (range: 2–28 ng/g lw and 1–6 ng/g lw for harbour porpoises and seals, respectively). In general, the highest concentrations were found in juveniles, suggesting an increased biotransformation capacity with age or the influence of dilution by growth for both species. Here we show that naturally-produced brominated organic compounds can biomagnify and accumulate in North Sea top predators, although to a lesser extent than anthropogenic lipophilic contaminants, such as polychlorinated biphenyls (PCBs) or PBDEs.     

Extending the environmental risk assessment for oseltamivir (Tamiflu®) under pandemic use conditions to the coastal marine compartment

In case of an avian-influenza-derived human flu pandemic, an inordinately high use of medicines over several weeks is predicted, in particular for the recommended influenza antiviral oseltamivir (Tamiflu). While the risk of oseltamivir to sewage works and freshwater bodies has already been assessed, the fact that a large percentage of the human population worldwide lives relatively close to the sea raises concern for its environmental compatibility in coastal marine waters. The potential risk of high oseltamivir use to the marine compartment is assessed in this publication, based on the 2003 European Community Technical Guidance Document (TGD) for risk assessment. Subchronic embryo–larval ecotoxicity tests with three marine invertebrates (Pomatoceros triqueter, Annelida; Mytilus edulis, Mollusca; Paracentrotus lividus, Echinodermata) and chronic growth inhibition tests with two different groups of marine microalgae (Isochrysis galbana, Haptophyta; Skeletonema costatum, Heterokontophyta) were performed with the active substance oseltamivir carboxylic acid to derive a dependable marine predicted no-effect concentration (PNEC). This was compared to a predicted environmental concentration (PEC) for oseltamivir in coastal waters, based on the worst-case freshwater PEC. The PEC/PNEC risk characterisation ratio for the marine compartment is well below 1, which in the terminology of the TGD signifies no immediate concern. Further, while oseltamivir may be persistent (P), it is not bioaccumulative (B) nor highly ecotoxic (T) and therefore not a PBT substance. In conclusion, even a high pandemic use of oseltamivir would not lead to a significant risk for the marine compartment, in confirmation of the risk assessment for sewage works and freshwaters.     

Estimating human exposure to transport noise in central Dublin, Ireland

This paper reports on research conducted to determine estimates of the extent of environmental noise exposure from road transport on residents and workers in central Dublin, Ireland. The Harmonoise calculation method is used to calculate noise values for the study area while a Geographical Information System (GIS) is utilised as a platform upon which levels of noise exposure are estimated. Residential exposure is determined for L(den) and L(night) while worker exposure is determined for L(den). In order to analyse the potential of traffic management as a noise abatement measure, traffic was redirected from the main residential areas to alternative road links and the revised exposure levels were determined. The results show that the extent of noise exposure in Dublin is considerable, and in relative terms, it is worse for the night-time period. In addition, the results suggest also that traffic management measures have the potential to lead to significant reductions in the level of noise exposure provided that careful consideration is given to the impact of traffic flows on residential populations.     

Design considerations for environmental sustainability in high density development: a case study of Hong Kong

This study has indicated that there is close relationship between development density and environmental quality; therefore, it is necessary to decide the form of development carefully beforehand. The form of development is shaped either by new development or urban renewal which is a major tactic nowadays adopted by the Hong Kong Government to improve the living condition of the citizens and the quality of the built environment. This study is limited to urban renewal and aims to find out the major urban design considerations for sustaining the environment. Through a questionnaire survey carried out in Hong Kong, the opinions of architects, planners, property development managers, and local citizens were sought and evaluated, and critical design factors for enhancing environmental sustainability of urban renewal projects are highlighted. The results derived from factor analysis indicated that certain design considerations should be incorporated for sustaining the urban environment. “Land Use Planning”, “Quality of Life”, “Conservation & Preservation”, “Integrated Design”, “Provision of Welfare Facilities”, and “Conservation of Existing Properties” were believed to be the significant underlying factors for achieving environmental sustainability of local urban renewal projects. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Acid generation upon thermal concentration of natural water: The critical water content and the effects of ionic composition

Thermal evaporation of a variety of simulated pore waters from the region of Yucca Mountain, Nevada, produced acidic liquids and gases during the final stages of evaporation. Several simulated pore waters were prepared and then thermally distilled in order to collect and analyze fractions of the evolved vapor. In some cases, distillates collected towards the end of the distillation were highly acidic; in other cases the pH of the distillate remained comparatively unchanged during the course of the distillation. The results suggest that the pH values of the later fractions are determined by the initial composition of the water. Acid production stems from the hydrolysis of magnesium ions, especially at near dryness. Near the end of the distillation, magnesium nitrate and magnesium chloride begin to lose water of hydration, greatly accelerating their thermal decomposition to form acid. Acid formation is promoted further when precipitated calcium carbonate is removed. Specifically, calcium chloride-rich pore waters containing moderate (10–20 ppm) levels of magnesium and nitrate and low levels of bicarbonate produced mixtures of nitric and hydrochloric acid, resulting in a precipitous drop in pH to values of 1 or lower after about 95% of the original volume was distilled. Waters with either low or moderate magnesium content coupled with high levels of bicarbonate produced slightly basic fractions (pH 7–9). If calcium was present in excess of bicarbonate, waters containing moderate levels of magnesium produced acid even in the presence of bicarbonate, due to the precipitation of calcium carbonate. Other salts such as halite and anhydrite promote the segregation of acidic vapors from residual basic solids. The concomitant release of wet acid gas has implications for the integrity of the alloys under consideration for containers at the Yucca Mountain nuclear waste repository. Condensed acid gases at very low pH, especially mixtures of nitric and hydrochloric acid, are capable of corroding even alloys, such as nickel-based Alloy 22, which are considered to be corrosion-resistant under milder conditions.