Sorption of polar and nonpolar organic contaminants by oil-contaminated soil

Sorption of nonpolar (phenanthrene and butylate) and polar (atrazine and diuron) organic chemicals to oil-contaminated soil was examined to investigate oil effects on sorption of organic chemicals and to derive oil–water distribution coefficients (K_oil). The resulting oil-contaminated soil–water distribution coefficients (K_d) for phenanthrene demonstrated sorption-enhancing effects at both lower and higher oil concentrations (C_oil) but sorption-reducing (competitive) effects at intermediate C_oil (approximately 1 g kg⁻¹). Rationalization of the different dominant effects was attempted in terms of the relative aliphatic carbon content which determines the accessibility of the aromatic cores to phenanthrene. Little or no competitive effect occurred for butylate because its sorption was dominated by partitioning. For atrazine and diuron, the changes in K_d at C_oil above approximately 1 g kg⁻¹ were negligible, indicating that the presently investigated oil has little or no effect on the two tested compounds even though the polarity of the oil is much less than soil organic matter (SOM). Therefore, specific interactions with the active groups (aromatic and polar domains) are dominantly responsible for the sorption of polar sorbates, and thus their sorption is controlled by available sorption sites. This study showed that the oil has the potential to be a dominant sorptive phase for nonpolar pollutants when compared to SOM, but hardly so for polar compounds. The results may aid in a better understanding of the role of the aliphatic and aromatic domains in sorption of nonpolar and polar organic pollutants.     

Polychlorinated naphthalenes (PCNs) in riverine and marine sediments of the Laizhou Bay area, North China

PCN congeners were analyzed in marine and riverine sediments of the Laizhou Bay area, North China. Concentrations of PCNs ranged from 0.12 to 5.1 ng g⁻¹ dry weight (dw) with a mean value of 1.1 ng g⁻¹ dw. The levels of PCNs varied largely, with industrial group approximately ten folds higher than those of the rural in riverine sediment. A strong impact by direct discharge from local factories was suggested. Similar compositional profiles were found within groups. High resemblance of compositional profiles between industrial samples and Halowax 1014 was observed. It was indicated that PCNs in riverine sediments were mainly from release of industrial usage, with additional contributions from industrial thermal process at certain sites. In marine sediments, it was suggested that PCNs along the coast of Laizhou Bay were mainly controlled by riverine input. While in the central bay, PCN distributions were possibly impacted by combined multiple factors.     

浅议保险对企业安全监督管理之作用

通过开展适合于保险和安全监管工作的风险评估体系的研究,充分发挥保险于安全监管的作用,从而为降低职工、企业乃至全社会的风险水平,为经济的可持续发展和社会稳定提供必要的保证。     

硫化锰纳米颗粒高效去除重金属镉

中国镉污染问题日益严峻,开发高效的镉吸附剂,是解决环境镉污染问题的重要技术手段。采用共沉淀方法合成了硫化锰纳米颗粒,研究了其对重金属镉的吸附行为,并采用X射线衍射(XRD)、扫描电镜(SEM)、高分辨透射电镜(HR-TEM)、比表面积(BET)等技术手段探究了硫化锰纳米颗粒的形貌、化学组分以及镉的去除机制。结果表明,MnS纳米颗粒呈球状,平均粒径100 nm,比表面积30.56 m²·g⁻¹。MnS纳米颗粒对Cd²⁺的吸附动力学数据较好地符合伪二级动力学模型;吸附等温线数据较好地符合Langmuir模型,说明MnS对Cd²⁺的吸附是以化学吸附为主的单分子层吸附。使用Langmuir拟合的MnS饱和最大镉吸附量为349.6 mg·g⁻¹,在众多镉吸附材料中处于前列。对于模拟工厂重金属废水的处理,MnS纳米颗粒可以在5 h内使镉的浓度由60 mg·L⁻¹降至国家规定排放线以下(<0.1 mg·L⁻¹),且吸附过程中水体pH稳定,对水体干扰小。在多种重金属离子共存的情况下,仍可以达到接近100%的Cd²⁺去除率。硫化锰相对稳定,在空气中放置30 d仍有80%的镉去除率。较高的离子交换量形成CdS沉淀是MnS高效去除镉的主要原因。     

CASS工艺园区污水处理厂提标改造为AAO+三级处理工艺后的运行效果对比分析

为深入落实长江大保护政策,对南京经济技术开发区污水处理厂实施了提标改造。提标工艺为粗细格栅+曝气沉砂池+AAO+高效沉淀池+滤布滤池+消毒。结果表明：在该工艺运行过程中,进水可部分选择性地或全部越过厌氧池进入缺氧池,从而强化反硝化脱氮;在好氧池池末端前置投加除磷药剂,不仅可去除一定的COD和TP,还有强化二沉池污泥压缩、泥水分离的效果;借助碳源投加可提高来水可生化性;增加一套占地面积小、处理效果稳定的高效沉淀池+滤布滤池+消毒三级处理工艺,可控制出水水质,使其持续稳定达标;提标后出水COD、TP、TN、NH₃-N、SS的平均质量浓度分别由37.9、0.323、11.18、1.94、19 mg·L⁻¹降低至22.3、0.029、4.55、0.08、3 mg·L⁻¹,污水直接处理成本由0.47元·t⁻¹增加到0.78元·t⁻¹;提标后出水水质稳定达到《城镇污水处理厂污染物排放标准》(GB 18918-2002)一级A标准,部分指标满足《地表水环境质量标准》(GB 3838-2002)Ⅳ类水标准要求。该提标改造项目的实施经济效益可行、社会效益显著,可为同类型污水处理厂提标改造工作提供参考。     

基于三角随机模拟和ArcGIS的河流水环境健康风险评价模型

基于河流水环境系统中随机性、模糊性等多种不确定性共存或交叉存在的特性,将三角模糊数与随机模拟方法相耦合,构建了三角随机模拟模型,并将其应用到湘江(长沙段)的健康风险评价中。通过将各参数浓度进行三角模糊化和随机模拟,结果表明,各断面污染物造成的健康风险的变化趋势,总体沿湘江上游至下游逐步降低,表现为昭山 > 猴子石 > 五一桥 > 橘子洲 > 乔口 > 三汊矶,且昭山、三汊矶断面和乔口断面均有恶化趋势。相对于常规的确定性方法,本模型能够得出评价区域健康风险的可能值区间及其相应的概率水平等定量信息,更加客观、全面地表征评价区域的风险状态及其空间分布差异,为决策者提供更多有用的信息。     

过硫酸钾-偶氮复合引发体系合成杂化高分子絮凝剂PACS-PAM及其表征

采用过硫酸钾(K2S2O8)-偶氮二异丁咪唑啉盐酸盐(VA-044引发剂)复合引发体系合成了聚硫氯化铝-聚丙烯酰胺(PACS-PAM)杂化高分子絮凝剂。以特性黏度为指标,考察了引发剂配比、引发剂总用量、单体质量浓度、总铝浓度(AlT)、反应温度和反应时间等因素对杂化絮凝剂PASC-PAM的合成影响,结果表明,杂化絮凝剂PACS-PAM的最佳合成条件为引发剂K2S2O8与偶氮VA-044质量比为3:1、引发剂总用量为单体总质量的0.2%、单体质量浓度为0.21 g/mL、总铝浓度(AlT)为0.15 mol/L、反应温度为50 ℃、反应时间为3 h,在最佳条件下合成的杂化高分子的特性黏度为14.70 dL/g。电导率分析、红外光谱(FTIR)分析和热重-差热(DTA-TGA)分析表明,杂化絮凝剂中有机组分同无机组分是通过PAM分子链端的硫酸根离子(—SO42-)的桥连作用以离子键形式连接的。对黄泥悬浊液的絮凝效果研究表明,杂化絮凝剂PASC-PAM的絮凝效果优于复配絮凝剂PASC-PAM。