On-line production of ferrate with an electrochemical method and its potential application for wastewater treatment – A review

A number of studies on the oxidation of various organic/inorganic contaminants by ferrate(VI) were reported in the 1980s and 1990s. The exploration of the use of ferrate(VI) for water and wastewater treatment has been well addressed recently. However, challenges have existed for the implementation of ferrate(VI) technology in practice due to the instability of a ferrate solution or high production cost of solid ferrate products. The research has been carried out aiming at the generation and application of ferrate(VI) in situ. This paper thus reviews ferrate chemistry and its overall performance as a water treatment chemical, discusses the factors affecting the ferrate yield efficiency using the electrochemical method, and finally, summarises the work on the production and use of ferrate in situ which is currently under study.     

Landfill site selection using spatial information technologies and AHP: A case study in Beijing,China

Site selection is an important and necessary issue for waste management in fast-growing regions. Because of the complexity of waste management systems, the selection of the appropriate solid waste landfill site requires consideration of multiple alternative solutions and evaluation criteria. Based on actual conditions of the study area, we considered economic factors, calculated criteria weights using the analytical hierarchy process (AHP), and built a hierarchy model for solving the solid waste landfill site-selection problem in Beijing, China. A geographic information system (GIS) was used to manipulate and present spatial data. All maps are graded from 1 (lowest suitability) to 5 (highest suitability) using spatial information technologies. The candidate sites were determined by aggregation based on the criteria weights. The candidate sites are divided by ‘best’, ‘good’ and ‘unsuitable’ landfill areas. Best landfill areas represent optimal sites; good landfill areas can be used as back-up candidate sites. Our work offers a siting methodology and provides essential support for decision-makers in the assessment of waste management problems in Beijing and other rapidly developing cities in developing countries.     

Study on the hydrolysis/precipitation behavior of Keggin Al13 and Al30 polymers in polyaluminum solutions

The hydrolysis/precipitation behaviors of Al³⁺, Al₁₃ and Al₃₀ under conditions typical for flocculation in water treatment were investigated by studying the particulates' size development, charge characteristics, chemical species and speciation transformation of coagulant hydrolysis precipitates. The optimal pH conditions for hydrolysis precipitates formation for AlCl₃, PAC_Al13 and PAC_Al30 were 6.5–7.5, 8.5–9.5, and 7.5–9.5, respectively. The precipitates' formation rate increased with the increase in dosage, and the relative rates were AlCl₃ ? PAC_Al30 > PAC_Al13. The precipitates' size increased when the dosage increased from 50 μM to 200 μM, but it decreased when the dosage increased to 800 μM. The Zeta potential of coagulant hydrolysis precipitates decreased with the increase in pH for the three coagulants. The iso-electric points of the freshly formed precipitates for AlCl₃, PAC_Al13 and PAC_Al30 were 7.3, 9.6 and 9.2, respectively. The Zeta potentials of AlCl₃ hydrolysis precipitates were lower than those of PAC_Al13 and PAC_Al30 when pH > 5.0. The Zeta potential of PAC_Al30 hydrolysis precipitates was higher than that of PAC_Al13 at the acidic side, but lower at the alkaline side. The dosage had no obvious effect on the Zeta potential of hydrolysis precipitates under fixed pH conditions. The increase in Zeta potential with the increase in dosage under uncontrolled pH conditions was due to the pH depression caused by coagulant addition. Al–Ferron research indicated that the hydrolysis precipitates of AlCl₃ were composed of amorphous Al(OH)₃ precipitates, but those of PAC_Al13 and PAC_Al30 were composed of aggregates of Al₁₃ and Al₃₀, respectively. Al³⁺ was the most un-stable species in coagulants, and its hydrolysis was remarkably influenced by solution pH. Al₁₃ and Al₃₀ species were very stable, and solution pH and aging had little effect on the chemical species of their hydrolysis products. The research method involving coagulant hydrolysis precipitates based on Al–Ferron reaction kinetics was studied in detail. The Al species classification based on complex reaction kinetic of hydrolysis precipitates and Ferron reagent was different from that measured in a conventional coagulant assay using the Al–Ferron method. The chemical composition of Al_a, Al_b and Al_c depended on coagulant and solution pH. The Al_b measured in the current case was different from Keggin Al₁₃, and the high Al_b content in the AlCl₃ hydrolysis precipitates could not used as testimony that most of the Al³⁺ was converted to highly charged Al₁₃ species during AlCl₃ coagulation.     

Diversity of Soil Nematodes in Areas Polluted with Heavy Metals and Polycyclic Aromatic Hydrocarbons (PAHs) in Lanzhou,China

This study investigated the soil nematode community structure along the Yellow River in the Lanzhou area of China, and analyzed the impact of heavy metals (Cd, Pb, Cr, Cu, and Zn) and polycyclic aromatic hydrocarbons (PAHs) on the nematode community. Soil samples from five locations (named A–E), which were chosen for soil analysis, showed significant differences in their heavy metal content (p < 0.01), as well as in the variety of nematodes (up to 41 genera) and families (up to 20) that were present. The different samples also differed significantly in the total PAH content (p < 0.05), as well as the six types of PAH present. Sites A–C showed the most severe contamination with heavy metals and PAHs; these sites had the lowest abundance of fungivores and omnivore/predators, but the proportion of bacteriovores was the highest (p < 0.05). Site E, in contrast, showed only minor pollution with heavy metals and PAHs, and it contained the highest abundance of plant parasites (p < 0.05). Several nematode ecological indicators were found to correlate with concentration of soil pollutants at all the sites tested: the maturity index (MI, in addition to plant parasites), plant parasite index (PPI), ΣMI (including all the soil nematodes), Shannon-Wiener diversity index (H′′), and Wasilewska index (WI). Disturbance to the soil environment was more severe when MI, ΣMI, and H′ values were lower. The results of the study show that the abundance and structure of the soil nematode communities in the sampling locations were strongly influenced by levels of heavy metals and PAHs in the soil. They also show that the diversity index H′ and the maturity index can be valuable tools for assessing the impact of pollutants on nematodes.     

An Interval-Parameter Waste-Load-Allocation Model for River Water Quality Management Under Uncertainty

A simulation-based interval quadratic waste load allocation (IQWLA) model was developed for supporting river water quality management. A multi-segment simulation model was developed to generate water-quality transformation matrices and vectors under steady-state river flow conditions. The established matrices and vectors were then used to establish the water-quality constraints that were included in a water quality management model. Uncertainties associated with water quality parameters, cost functions, and environmental guidelines were described as intervals. The cost functions of wastewater treatment units were expressed in quadratic forms. A water-quality planning problem in the Changsha section of Xiangjiang River in China was used as a study case to demonstrate applicability of the proposed method. The study results demonstrated that IQWLA model could effectively communicate the interval-format uncertainties into optimization process, and generate inexact solutions that contain a spectrum of potential wastewater treatment options. Decision alternatives can be generated by adjusting different combinations of the decision variables within their solution intervals. The results are valuable for supporting local decision makers in generating cost-effective water quality management strategies.     

Methodology of industry scale analysis under the constraint of regional resource capacity using HSY algorithm

This paper develops a methodology of proper scale analysis for regional industry development, which can be used in industry planning with the consideration of regional resource capacities. In the face of different data sources and even data scarcity, alternative methods based on linear programming and quadratic programming algorithms for calculating the resource intensity factors are designed. Based on the empirical study of industrialization, initial scenarios of industry development were set. Using HSY algorithm, sensitive industries that may cause exceeding regional resource capacity can be identified, and the risk of exceeding can be predicted and expressed in probability. Furthermore, a proper scale range can be designed for these sensitive industries according to resource capacity. Taking the case of Dalian city in China, this paper estimated the regional urban development plan, various resources capacities were studied, and land resources were estimated to be the most critical resource for the city. The land resource depletion intensities of different industries are calculated by quadratic programming algorithm. Under the constraint of 427.56 km² available industrial land resources, the electronic and power industries have the most significant impact on total land use, if the scale of power industry exceeds 1.27 billion USD, the probability of land resource capacity breakthrough will be 50%.     

Octanol–air partition coefficients of polybrominated biphenyls

The octanol–air partition coefficients (K_OA) for PBB15, PBB26, PBB31, PBB49, PBB103 and PBB153 were determined as a function of temperature using a gas chromatographic retention time technique with 1,1,1-trichloro-2,2-bis (4-chlorophenyl) ethane (p,p′-DDT) as a reference substance. The internal energies of phase change from octanol to air (Δ_OAU) were calculated for the six compounds and were in the range from 74 to 116 kJ mol⁻¹. Simple regression equations of log K_OA versus relative retention times (RRTs) on gas chromatography (GC), and log K_OA versus molecular connectivity indexes (MCI) were obtained, for which the correlation coefficients (r²) were greater than 0.985 at 283.15 K and 298.15 K. Thus the K_OA values of the remaining PBBs can be predicted by using their RRTs and MCI according to these relationships.     

Gas/particle partitioning of atmospheric PCDD/Fs in a satellite town in Eastern China

Gas/particle partitioning of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in ambient air was investigated in a satellite town in Eastern China from April 2007 to January 2008 comprehending large temperature variations (from 3 to 34 °C, daily average). Molecular weight, molecular structure and ambient temperatures are the three major factors that govern the gas/particle partitioning of atmospheric PCDD/Fs throughout the year. Generally, good agreements were obtained (except for winter) between measured particulate fractions and theoretical estimates of both the Junge–Pankow adsorption model and Harner Bidleman absorption model using different sets of subcooled liquid vapor pressure and octanol–air partition coefficient (K_oa), respectively. Models utilizing estimates, derived from gas chromatographic retention indices (GC-RIs), are more accurate than that of entropy-based. Moreover, during winter, the K_oa-based model using the GC-RIs approach performs better on lower chlorinated PCDD/Fs than that of -based. Furthermore, possible sources of mismatch between measured and predicted values in winter (3–7 °C) were discussed. Gas adsorption artifact was demonstrated to be of minor importance for the phenomena observed. On the other hand, large deviations of slopes (m_r) and intercepts (b_r) in logK_p vs. plots from theoretical values are observed in the literature data and these are found to be linearly correlated with ambient temperatures (P<0.001) in this study. This indicates that the non-equilibrium partitioning of PCDD/Fs in winter may be significantly influenced by the colder temperatures that may have slowed down the exchange between gaseous and particulate fractions.     

Important role of reaction field in photodegradation of deca-bromodiphenyl ether: Theoretical and experimental investigations of solvent effects

Photolysis of deca-bromodiphenyl ether (BDE-209) was investigated in tetrahydrofuran, dichloromethane, isopropanol, acetone, ethanol, methanol, acetonitrile and dimethylsulfoxide. Noticeable differences of the photolytic rates and quantum yields were found in the diverse solvents. Different to the previous deductions, hydrogen donating efficiency and electron donating efficiency of solvents were not the decisive factors for the photolytic rate in this study, which was proved by the fast photolysis of BDE-209 in CCl₄, a solvent without hydrogen and difficult to donate electrons. Besides hydrogen addition process, intermolecular polymerization might occur during the photolysis. Density functional theory (DFT) calculation was performed to understand the molecular properties of BDE-209 in different solvents. The lowest singlet vertical excitation energy (E_ex) and the average formal charge on Br () of BDE-209, reflecting the difficulty for the excitation of BDE-209 and for the departing of Br atom, respectively, were changed by the reaction fields formed by the different solvents. E_ex and linearly correlated with the photolytic activity (log k). This study is helpful to better understand the photolytic behavior of BDE-209 in different media.     

Determination of estrogenic compounds in wastewater using liquid chromatography-tandem mass spectrometry with electrospray and atmospheric pressure photoionization following desalting extraction

Two complementary LC-MS ionization methods, electrospray (ESI) and atmospheric pressure photoionization (APPI), have been optimized to determine three natural estrogenic compounds (estrone, 17beta-estradiol and estriol) and two synthetic estrogenic compounds (17alpha-ethynylestradiol and diethylstilbestrol) in the influent and effluent of wastewater treatment plants (WWTPs). The wastewater samples were first subjected to solid-phase extraction coupled with desalting extraction to remove matrix interference. The analytes were then detected using liquid chromatography-tandem mass spectrometry (LC-MS-MS) with ESI and dopant-assisted (DA) APPI to evaluate the ion suppression effect and to complement the detection and quantification of estrogenic compounds in complex wastewater samples. The average ion suppression factors for the extracts of the WWTP influent analyzed using ESI and APPI were 52+/-5% and 27+/-7%, respectively. The sensitivity and ionization efficiency of the LC-ESI-MS-MS system decreased dramatically when a complex matrix was present in the WWTP influent sample. Estrogenic compounds could be detected in the WWTP influent and effluent samples at concentrations below the parts-per-billion level. The lower detection limits obtained when using ESI and the higher matrix tolerance of the APPI method allowed the complete quantification of estrogenic compounds in very complex samples in a complementary manner.