CFD simulation of MSW combustion and SNCR in a commercial incinerator

A CFD scheme was presented for modeling municipal solid waste (MSW) combustion in a moving-grate incinerator, including the in-bed burning of solid wastes, the out-of-bed burnout of gaseous volatiles, and the selective non-catalytic reduction (SNCR) process between urea (CO(NH₂)₂) and NO_x. The in-bed calculations provided 2-D profiles of the gas–solid temperatures and the gas species concentrations along the bed length, which were then used as inlet conditions for the out-of-bed computations. The over-bed simulations provided the profiles of incident radiation heat flux on the top of bed. A 3-dimensional benchmark simulation was conducted with a 750 t/day commercial incinerator using the present coupling scheme incorporating with a reduced SNCR reduction mechanism. Numerical tests were performed to investigate the effects of operating parameters such as injection position, injection speed and the normalized stoichiometric ratio (NSR) on the SNCR performance. The simulation results showed that the distributions of gas velocity, temperature and NO_x concentration were highly non-uniform, which made the injection position one of the most sensitive operating parameters influencing the SNCR performance of moving grate incinerators. The simulation results also showed that multi-layer injections were needed to meet the EU2000 standard, and a NSR 1.5 was suggested as a compromise of a satisfactory NO_x reduction and reasonable NH₃ slip rates. This work provided useful guides to the design and operation of SNCR process in moving-grate incinerators.     

Stabilization of heavy metals in MSWI fly ash using silica fume

The objective of this work was to investigate the feasibility and effectiveness of silica fume on stabilizing heavy metals in municipal solid waste incineration (MSWI) fly ash. In addition to compressive strength measurements, hydrated pastes were characterized by X-ray diffraction (XRD), thermal-analyses (DTA/TG), and MAS NMR (²⁷Al and ²⁹Si) techniques. It was found that silica fume additions could effectively reduce the leaching of toxic heavy metals. At the addition of 20% silica fume, leaching concentrations for Cu, Pb and Zn of the hydrated paste cured for 7 days decreased from 0.32 mg/L to 0.05 mg/L, 40.99 mg/L to 4.40 mg/L, and 6.96 mg/L to 0.21 mg/L compared with the MSWI fly ash. After curing for 135 days, Cd and Pb in the leachates were not detected, while Cu and Zn concentrations decreased to 0.02 mg/L and 0.03 mg/L. The speciation of Pb and Cd by the modified version of the European Community Bureau of Reference (BCR) extractions showed that these metals converted into more stable state in hydrated pastes of MSWI fly ash in the presence of silica fume. Although exchangeable and weak-acid soluble fractions of Cu and Zn increased with hydration time, silica fume addition of 10% can satisfy the requirement of detoxification for heavy metals investigated in terms of the identification standard of hazardous waste of China.     

Inexact fuzzy-stochastic constraint-softened programming – A case study for waste management

In this study, an inexact fuzzy-stochastic constraint-softened programming method is developed for municipal solid waste (MSW) management under uncertainty. The developed method can deal with multiple uncertainties presented in terms of fuzzy sets, interval values and random variables. Moreover, a number of violation levels for the system constraints are allowed. This is realized through introduction of violation variables to soften system constraints, such that the model’s decision space can be expanded under demanding conditions. This can help generate a range of decision alternatives under various conditions, allowing in-depth analyses of tradeoffs among economic objective, satisfaction degree, and constraint-violation risk. The developed method is applied to a case study of planning a MSW management system. The uncertain and dynamic information can be incorporated within a multi-layer scenario tree; revised decisions are permitted in each time period based on the realized values of uncertain events. Solutions associated with different satisfaction degree levels have been generated, corresponding to different constraint-violation risks. They are useful for supporting decisions of waste flow allocation and system-capacity expansion within a multistage context.     

基于生态足迹的武汉城市圈生态承载力评价和生态补偿研究

在推进新型城镇化和生态建设的背景下,客观定量评价区域生态环境状态,是当前我国生态建设重要而紧迫的任务之一。高密度的人类活动会对自然生态系统产生超负荷的压力,通过生态承载力的分析能够定量测度这种状况,为区域可持续发展提供借鉴意义。基于生态足迹模型,计算了2008年和2013年武汉城市圈各县域单元的生态足迹/承载力,并进行了时空变化分析。研究发现武汉城市圈各县域单元的生态足迹和生态承载力在空间上存在显著的差异性,生态足迹逐年增加,生态承载力的变化相对较小,出现两级分化的现象。根据生态足迹/承载力进行跨区县生态补偿测算,得到2008年和2013年武汉城市圈48个县域的转移支付情况,表明如果运用财政转移支付的手段,整个区域能够达到生态系统供给和需求动态平衡的目标,缓解武汉城市圈的生态压力,实现武汉城市圈的可持续发展。     

中国工业碳排放达峰的情景预测与减排潜力评估

实现2030年碳排放达峰不仅是中国为应对全球气候变化向国际社会做出的郑重承诺,也是中国未来经济结构转型与可持续发展的必然选择。基于中国实现2030年碳排放达到峰值的宏观目标为背景,本文以中国碳排放的主要行业工业为研究对象,首先运用拓展的STIRPAT模型对工业及其9个细分行业的碳排放达峰进行了情景预测,然后基于公平和效率的双重视角对工业细分行业的减排潜力进行评估。研究表明:(1)仅有低碳情景和抑制排放情景2可以实现中国碳排放2030年达峰,低碳情景是实现中国工业碳排放达峰的最佳发展模式,达峰时间最早(2030年),峰值最低(140.43亿t)。激进排放情景则是最差的发展模式,达峰时间最晚(2036年),峰值也最高(150.09亿t)。(2)工业内部各细分行业碳排放的最优达峰情景差别较大。建材和纺织制造业能够实现提前达峰,可以在这类行业率先实施达峰管理措施,使其带动其他行业陆续达峰。(3)最具减排潜力的行业是石油制造业,其次是电力行业,这些减排潜力较大的行业应该成为国家节能减排的重点对象。(4)基于工业各细分行业在减排公平性和效率性上的差异将工业9个细分行业分为四类。其中,石油、钢铁制造业和电力行业属于"高效高公平行业";化工、建材制造业属于"低效高公平行业";采掘业属于"高效不公平行业";纺织、轻工和机电制造业属于"低效不公平行业"。中国应针对不同类型的行业制定出相应的减排战略,将减排重点放在各行业最具潜力的方面。最后,文章对实现中国工业碳排放达峰管理提出了几点政策建议。     

长江中下游河道与岸线演变特点

分析了长江中下游河道岸线变化的主要因素，它们分别是河岸崩塌，泥沙淤积及人类活动等，其中河岸崩塌是河道岸线演变的最主要原因。总的来说长江中下游干流河势是稳定的，但五个河段有各自演变特点和规律，其中宜昌－枝城段河道与河床比较稳定，岸线顺直，但葛洲坝和三峡水利枢纽建成后对河床的冲刷作用较大；荆江段是长江著名的河曲段，其冲淤变化较大；城陵矶至湖口段为节点和分汊河床组成，一般来说节点较为稳定，而分汊河床不太稳定，湖口至江阴河段岸线一般较为稳定，但弯道河床变化较大；河口段不但受江流作用影响，还受潮流与波浪等共同影响，所以河口河床演变迅速，主要表现为汊道主泓迁移摆动。     

Characteristics of the PAH emissions from the incineration of livestock wastes with/without APCD

This study was conducted on two batch-type livestock waste incinerators, including the one with an air-pollution control device (APCD)-one wet scrubber (WSB) and the other without APCD for the disposal of livestock wastes. The concentration and composition of 21 individual polycyclic aromatic hydrocarbons (PAHs) in the stack flue gas (gas and particle phases), bottom ash, and effluent of WSB were determined. Stack flue gas samples were collected by a PAH stack-sampling system. Twenty-one individual PAHs were analyzed by a gas chromatography/mass spectrometer (GC/MS). Due to the low combustion temperature, a remarkable and significant increase in the total-PAH concentration of emission from the stack with APCD was observed when compared with the case without APCD. Measured total-PAH emission factors were 285 and 2.86 mg/kg waste for the incineration with and without APCD, respectively, while BaP (the most carcinogenic PAH) emission factors were 0.79 and 0.12 mg/kg waste for the incineration with and without APCD. The total-PAH output/input mass ratios averaged 0.011 and 0.004 with and without APCD, respectively. The result reveals that the PAH content in the auxiliary fuel during the incinerating process could affect the emission of PAH.     

Socioeconomic Impact of Forest Eco-compensation Mechanism in Hainan Province of China

The establishment of the forest eco-compensation mechanism could realize the value of the forest ecosystem services partly or thoroughly, stress the equality of the stakeholders, encourage public participation in forest ecosystem tendering, and strengthen the capacity of sustainable management. Taking the Hainan province as an example, this study focuses on the analysis of major socioeconomic and ecological impacts of forest eco-compensation in the Qiongzhong County and Lingshui County, and recommends approaches and practices for the establishment of the eco-compensation mechanism in the Hainan Province. Data were collected from a household questionnaire survey. Altogether 120 households have been interviewed, and Statistical Product and Service Solutions (SPSS) was applied for data analysis. Most of the respondents held a positive attitude toward the forest eco-compensation policy which has contributed to the improvement of environmental quality. However, forest protection has limited the opportunities for the income growth of local communities, who have never got sufficient compensation from either the central or local governments. Insufficient financial support to forest institutions and local communities involved in forest management has led to major conflicts in forest management, such as, the conflict between forest protection and local economic development, and decrease in arable land area and increase in surplus labor force. On the basis of case study results, the core issues of forest eco-compensation mechanism in Hainan province are discussed. Finally, suggestions and recommendations that cover forest eco-compensation standards, management institutions, and community capacity building and diversification of financing channels, have been made for the establishment of forest eco-compensation mechanism in Hainan.     

Analysis of the Energy Embodied in Foreign Goods Trade of China

In recent years, scientists have been increasingly interested in the energy embodied in traded goods among countries. In this article, the direct energy intensities in various economic sectors of China were calculated with the data of energy consumption and output value of each sector, and the input-output table was used to estimate the external energy consumption. The total energy intensity of all sectors was then obtained. From the data of international trade, the energy embodied in goods trade of China was estimated for the period of 1994-2001. During this period, the average energy intensity of imported goods was always higher than that of exported ones. As a country with a surplus in international goods trade, China actually imported net embodied energy in the past few years. The net embodied energy imported was at the same magnitude of the imported energy in the form of fossil fuels.