双频超声波预处理破解污泥的研究

通过正交试验选取双频超声波预处理破解污泥的最优条件。对于指标VSS/SS,最优的超声波预处理参数组合:双频组合18 kHz、20 kHz,声能密度0.075 W/mL,超声间隔时间5 s,影响显著顺序为双频组合>声能密度>超声间隔时间;对于指标NH3-N,最优的超声波预处理参数组合是:双频组合18 kHz、20 kHz,声能密度0.1 W/mL,超声间隔时间5 s,影响显著顺序为双频组合>声能密度>超声间隔时间。通过对比试验的方式进一步验证了双频超声波预处理破解污泥的效果,结果表明双低频组合更有利于提高污泥的沉降性能。     

基于FTA和ISM的氯化反应失控火灾爆炸危险性分析

为加强甲烷热氯化工艺过程的安全管理,对氯化反应过程进行危险性分析。本研究介绍了氯甲烷的危害特性以及反应釜失控造成火灾爆炸的危险性,借助事故树分析法中结构重要度的排序获取基本原因事件,在此基础上运用解释结构模型(ISM)对氯化反应过程进行火灾爆炸危险性分析,根据所得基本原因事件的层级划分可得到造成事故发生的直接、间接以及根本原因,最终由ISM分析结果提出针对甲烷热氯化工艺火灾爆炸事故的安全对策措施。     

Visible-light-driven heterostructured g-C3N4/Bi-TiO2 floating photocatalyst with enhanced charge carrier separation for photocatalytic inactivation of Microcystis aeruginosa

• Bi doping in TiO₂ enhanced the separation of photo-generated electron-hole. • The performance of photocatalytic degradation of MC-LR was improved. • Coexisting substances have no influence on algal removal performance. • The key reactive oxygen species were h⁺ and ^•OH in the photocatalytic process. The increase in occurrence and severity of cyanobacteria blooms is causing increasing concern; moreover, human and animal health is affected by the toxic effects of Microcystin-LR released into the water. In this paper, a floating photocatalyst for the photocatalytic inactivation of the harmful algae Microcystis aeruginosa (M. aeruginosa) was prepared using a simple sol-gel method, i.e., coating g-C₃N₄ coupled with Bi-doped TiO₂ on Al₂O₃-modified expanded perlite (CBTA for short). The impact of different molar ratios of Bi/Ti on CBTA was considered. The results indicated that Bi doping in TiO₂ inhibited photogenerated electron-hole pair recombination. With 6 h of visible light illumination, 75.9% of M. aeruginosa (initial concentration= 2.7 × 10⁶ cells/L) and 83.7% of Microcystin-LR (initial concentration= 100 μg/L) could be removed with the addition of 2 g/L CBTA-1% (i.e., Bi/Ti molar ratio= 1%). The key reactive oxygen species (ROSs) in the photocatalytic inactivation process are h⁺ and ^•OH. The induction of the Bi⁴⁺/Bi³⁺ species by the incorporation of Bi could narrow the bandgap of TiO₂, trap electrons, and enhance the stability of CBTA-1% in the solutions with coexisting environmental substances.     

Effects of sulfur on variations in the chemical speciation of heavy metals from fly ash glass

● A higher sulfur content reduced the curing rate of Cr in glass. ● Depolymerization increased the amounts of heavy metals in the carbonate bound state. ● Reducing the CaO/SiO₂ ratio increased the proportion of stable heavy metals. This work designed a new CaO-Al₂O₃-SiO₂-SO₃ glass for the immobilization of multiple heavy metals found in dechlorinated fly ash having high amounts of calcium and sulfur. Increasing the (CaO + SO₃)/SiO₂ mass ratio (M(CS/S)) from 0.28 to 0.85 was found to lower the proportions of Mn, Ni and Zn in an unstable state, while an M(CS/S) ratio of 0.51 gave the lowest proportions of unstable Cr and Pb. Decreasing the degree of polymerization of the glassy network increased the proportions of Mn, Cr, Ni, Pb and Zn in the carbonate bound state. The leaching out of metals in this state was the primary cause of degradation of Q³ structural units in the glassy network. The amount of Mn in the iron-manganese oxide bound state was increased by increasing the number of Q² units in the silicate network. Decreasing the CaO/SiO₂ mass ratio (M(C/S)) raised the proportions of Mn, Ni and Zn in the unstable state. An M(C/S) value of 0.43 lowered the proportions of unstable Cr and Pb. A principal components analysis determined that the leaching of toxic heavy metals from the glass was primarily related to the proportions of these metals in the unstable state while there were no evident correlations between leaching and the proportions in stable states.     

常州地区近地面O3及其前物体相关性研究

根据2013年全年至2014年6月常州市环境监测中心空气自动监测系统监测子站的臭氧(O3)及其前体物(氮氧化物NOx和一氧化碳CO)的数据资料,着重分析了上述监测因子时间变化特征,并研究了三者之间的相关性.结果表明,受局地光化学反应,常州地区在冬夏两季O3污染程度相差较大,夏季为O3的活跃期浓度较高.O3单日浓度呈单峰型变化.NOx和O3浓度基本成正相关.CO的浓度变化与O3的浓度变化呈明显的正相关,且CO污染相对于O3污染有明显的滞后性.     

地质封存CO_2泄漏对蚯蚓的毒性效应

二氧化碳捕集与封存技术(CO_2 capture and storage, CCS)是当前国际上公认的CO_2减排的有效措施,但封存在地下的CO_2仍然因为各种不稳定因素存在泄漏风险,对土壤环境及土壤生态系统产生威胁。选择赤子爱胜蚓为研究对象,通过模拟高浓度CO_2对蚯蚓形态与生理变化的影响,探究CCS泄漏所产生的土壤高浓度CO_2对蚯蚓的毒性效应。研究表明,土壤高浓度CO_2使蚯蚓出现生殖环带肿大、尾部串珠以及断尾等外部形态变化,皮肤和刚毛受到损伤并且表皮发生褶皱等现象;随着CO_2浓度的增加以及暴露时间的延长,蚯蚓的死亡率不断增加,土壤高浓度CO_2对蚯蚓的7 d和14 d半致死浓度分别为26.39%和17.78%;蚯蚓体腔细胞溶酶体中性红保留时间(NRRT)减少。因此,蚯蚓有望作为监测CO_2泄漏的指示生物,NRRT可作为识别CO_2泄漏的敏感指标。     

Variations in surface functional groups, carbon chemical state and graphitization degree during thermal deactivation of diesel soot particles

The thermal deactivation of diesel soot particles exerts a significant influence on the control strategy for the regeneration of diesel particulate filters (DPFs). This work focused on the changes in the surface functional groups, carbon chemical state, and graphitization degree during thermal treatment in an inert gas environment at intermediate temperatures of 600°C, 800°C, and 1000°C and explore the chemical species that were desorbed from the diesel soot surface during thermal treatment using a thermogravimetric analyser coupled with a gas-chromatograph mass spectrometer (TGA-GC/MS). The surface functional groups and carbon chemical state were characterized using Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The graphitization degree was evaluated by means of Raman spectroscopy (RS). The concentrations of aliphatic C–H, C–OH, C=O, and O–C=O groups are reduced for diesel soot and carbon black when increasing the thermal treatment temperature, while the sp²/sp³ hybridized ratio and graphitization degree enhance. These results provide comprehensive evidence of the decreased reactivity of soot samples. Among oxygenated functional groups, the percentage reduction during thermal treatment is the largest for the O–C=O groups owing to its worst thermodynamic stability. TGA-GC/MS results show that the aliphatic and aromatic chains and oxygenated species would be desorbed from the soot surface during 1000°C thermal treatment of diesel soot.     

气井环空带压临界控制值研究

为了保证环空带压气井生产阶段的井筒完整性,确定气井环空压力安全运行范围,建立了基于API RP 90-2推荐做法的环空带压安全评价方法,重点研究了气井环空带压临界控制值计算方法,提出了1套方便现场应用的环空压力管控图版,针对某环空带压气井进行了现场应用研究。研究表明:API RP 90是针对海上油气井环空带压安全评价的推荐做法,在API RP 90-2推荐做法发布以后已不再继续适用于陆上油气井;基于API RP 90-2的推荐做法考虑因素更为全面,推荐在陆上油气井使用;环空带压临界控制值不再是1个固定值,而是随服役时间增长以及相邻和自身环空压力变化等因素不断变化的值。     

Effective removal of Cd2+ and Pb2+ pollutants from wastewater by dielectrophoresis-assisted adsorption

Dielectrophoresis (DEP) process could enhance the removal the Cd²⁺ and Pb²⁺ with less absorbent. The removal rates of both Cd²⁺ and Pb²⁺ increased with the increase of voltage. The overall removal rate of Cd²⁺ and Pb²⁺ in the binary system is higher than that of Cd²⁺ or Pb²⁺ in the single system. DEP could cause considerable changes of the bentonite particles in both surface morphology and microstructure. Dielectrophoresis (DEP) was combined with adsorption (ADS) to simultaneously and effectively remove Cd²⁺ and Pb²⁺ species from aqueous solution. To implement the process, bentonite particles of submicro-meter size were used to first adsorb the heavy metal ions. These particles were subsequently trapped and removed by DEP. The effects of the adsorbent dosage, DEP cell voltage and the capture pool numbers on the removal rate were investigated in batch processes, which allowed us to determine the optimal experimental conditions. The high removal efficiency, 97.3% and 99.9% for Cd²⁺ and Pb²⁺, respectively, were achieved when the ions are coexisting in the system. The microstructure of bentonite particles before and after ADS/DEP was examined by scanning electron microscopy. Our results suggest that the dielectrophoresis-assisted adsorption method has a high capability to remove the heavy metals from wastewater.     

含钴基金属有机框架硅橡胶泡沫阻燃特性研究*

为提高硅橡胶泡沫（SiFs）的阻燃性能,采用溶剂法制备钴基金属有机框架材料（Co-MOFs）并用X射线光电子能谱仪（XPS）对其结构进行表征。将制备的材料添加到SiFs中,利用极限氧指数（LOI）、UL-94试验和锥形量热仪（CONE）对SiFs的阻燃性能和抑烟性能进行研究。结果表明:添加1%及以上Co-MOFs时,SiFs阻燃等级达到UL-94-V0级;添加3%Co-MOFs时,SiFs的LOI达30.2%,热释放速率峰值（PHRR）和总热释放量（THR）相比原样分别降低了56.92%和66.73%;添加1%Co-MOFs的SiFs的产烟率峰值（PSPR）和产烟量（TSR）比原样分别降低了82%和85%,Co-MOFs提高了SiFs的阻燃和抑烟性能。