1m3粉尘环境模拟装置粉尘扩散数值模拟

在工业生产环境中,粉尘云会对工作人员产生职业危害,也会对生产设备造成危害,导致生产中断甚至安全事故.电气设备在工业生产中不可或缺,研究人员为研究工业电气设备的防尘性能开发了一种1 m3粉尘环境模拟装置.该试验装置的基本功能是利用持续气流使粉尘在罐体内形成相对稳定分布的粉尘环境,其内部空间可放置电气设备进行长时间的试验.为预测粉尘在装置中的分布,利用Fluent中的离散相模型对惰性粉尘进行了粉尘环境模拟装置内扩散的数值模拟研究.结果表明,粒径为1 μm、10 μm、30 μm、50 μm和70 μm的粉尘均可以在装置内部形成粉尘云,其罐体中心质量浓度可维持在0.2～0.5 kg/m3.不同粒径的粉尘分布截然不同,粒径越小的粉尘扩散的均匀程度越高,而较大粒径粉尘的运动稳定性更好,但分布均匀度较差,保持进气速度在40 m/s以上可以获得良好的粉尘扩散效果.     

Catalytic and electrocatalytic hydrogenolysis of brominated diphenyl ethers

Polybrominated diphenyl ethers (PBDEs) are ubiquitous environmental contaminants due to their use as additive flame-retardants. Conventional catalytic hydrogenolysis in methanol solution and electrocatalytic hydrogenolysis in aqueous methanol were examined as methods for debrominating mono- and di-bromodiphenyl ethers, as well as a commercial penta-PBDE mixture, in each case using palladium on alumina as the catalyst. Electrocatalytic hydrogenolysis employed a divided flow-through batch cell, with reticulated vitreous carbon cathodes and IrO2/Ti dimensionally stable anodes. Both methods gave efficient sequential debromination, with essentially complete removal of bromine from the PBDEs, but the electrocatalytic method was limited by the poor solubility of PBDEs in aqueous methanol.     

Deep learning architecture for air quality predictions

With the rapid development of urbanization and industrialization, many developing countries are suffering from heavy air pollution. Governments and citizens have expressed increasing concern regarding air pollution because it affects human health and sustainable development worldwide. Current air quality prediction methods mainly use shallow models; however, these methods produce unsatisfactory results, which inspired us to investigate methods of predicting air quality based on deep architecture models. In this paper, a novel spatiotemporal deep learning (STDL)-based air quality prediction method that inherently considers spatial and temporal correlations is proposed. A stacked autoencoder (SAE) model is used to extract inherent air quality features, and it is trained in a greedy layer-wise manner. Compared with traditional time series prediction models, our model can predict the air quality of all stations simultaneously and shows the temporal stability in all seasons. Moreover, a comparison with the spatiotemporal artificial neural network (STANN), auto regression moving average (ARMA), and support vector regression (SVR) models demonstrates that the proposed method of performing air quality predictions has a superior performance.     

中国实现碳达峰的政策建议——基于碳定价机制模型的多情景模拟分析

碳定价机制是利用市场机制推动碳减排、减缓气候变化方案的核心内容,包括碳排放权交易和碳税等措施。尽管新冠肺炎疫情打乱了经济发展节奏,但是中国主动提高国家自主贡献力度,积极推进战略提升与政策强化。本研究构建并运用"碳定价机制模型"模拟涵盖不同主体范围及政策组合下的碳排放权交易市场运行情况,分析评估碳减排效果及经济影响,为丰富完善我国实现碳达峰的政策工具提供技术支持。     

地铁停车场上盖物业开发声环境影响评价研究

占地面积大、交通便利的地铁停车场上盖物业开发越来越受到青睐。以南京市江宁大学城停车场上盖物业为例,对受到地铁停车场、高架地铁和公路3方面噪声源影响的上盖物业进行了声环境影响预测分析。得出:该项目受到停车场噪声影响的最大声级达61.9dB(A),受到高架地铁噪声和公路噪声叠加影响的等效声级昼间可达67.7dB(A),夜间可达63.6dB(A)。在确保落实相应防护措施的前提下,地铁停车场上盖物业在声环境上总体上具有可行性。     

Adsorption of lead on multi-walled carbon nanotubes with different outer diameters and oxygen contents: Kinetics, isotherms and thermodynamics

The effects of different outer diameters and surface oxygen contents on the adsorption of heavy metals onto six types of multi-walled carbon nanotubes (MWCNTs) were investigated in an aqueous solution and lead was chosen as a model metal ion. The results indicated that the percentage removal and adsorption capacity of lead remarkably increased with decreasing outer diameter due to larger specific surface area (SSA). The SSA-normalized maximum adsorption capacity (qm /SSA) and SSA-normalized adsorption coefficient (Kd /SSA) were strongly positively correlated with surface oxygen content, implying that lead adsorption onto MWCNTs significantly increases with the rise of oxygen content and decreases with decreasing SSA. The calculated thermodynamic parameters indicated that adsorption of lead on MWCNTs was endothermic and spontaneous. When the oxygen content of MWCNTs increased from 2.0% to 5.9%, the standard free energy (△ G0 ) became more negative, which implied that the oxygenated functional groups increased the adsorption affinity of MWCNTs for lead. Through calculation of enthalpy (△ H0 ), G0 and free energy of adsorption (Ea ), lead adsorption onto MWCNTs was recognized as a chemisorption process. The chemical interaction between lead and the phenolic groups of MWCNTs could be one of the main adsorption mechanisms due to highly positive correlations between the phenolic groups and K d /SSA or q m /SSA.     

中国电子垃圾危害与处理技术研究

作为信息产业迅速发展的产物,大量的电子垃圾对环境和社会的可持续发展带来了越来越多的影响。小作坊式的家庭处理方式,使电子垃圾不仅带来环境污染,同时还存在着严重的安全隐患,并且还造成资源的浪费。电子垃圾被填埋或者焚烧时,其中的重金属造成当地土壤和地下水的污染;有机物经过焚烧,释放出大量的有害气体,对自然环境和人体造成危害。针对电子垃圾的处理情况,综述了几种目前常用的电子垃圾处理技术,并对其优缺点进行了总结。     

Layered sphere-shaped TiO2 capped with gold nanoparticles on structural defects and their catalysis of formaldehyde oxidation

We describe here a one-step method for the synthesis of Au/TiO₂ nanosphere materials, which were formed by layered deposition of multiple anatase TiO₂ nanosheets. The Au nanoparticles were stabilized by structural defects in each TiO₂ nanosheet, including crystal steps and edges, thereby fixing the Au–TiO₂ perimeter interface. Reactant transfer occurred along the gaps between these TiO₂ nanosheet layers and in contact with catalytically active sites at the Au–TiO₂ interface. The doped Au induced the formation of oxygen vacancies in the Au–TiO₂ interface. Such vacancies are essential for generating active oxygen species (*O⁻) on the TiO₂ surface and Ti^3 + ions in bulk TiO₂. These ions can then form Ti^3 +–O⁻–Ti^4 + species, which are known to enhance the catalytic activity of formaldehyde (HCHO) oxidation. These studies on structural and oxygen vacancy defects in Au/TiO₂ samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.     

Smooth surface fabrication in mask projection based stereolithography

The surface finish is critical for applications such as optics, micro-fluid flow and mechanical assembly, in which optical lenses, fluidic channels and rotating components are all required to be smooth. However, the stair-stepping effect is well known in the layer-based additive manufacturing processes, in which a three-dimensional model is approximated by a set of two-dimensional layers. Consequently the fabricated surfaces have poor surface finishes especially those that are close to the horizontal plane. In this paper, a novel approach for achieving improved surface finish is presented for the mask-image-projection-based stereolithography (MIP-SL) process. Theoretical models and parameter characterization are presented for the developed methods. Accordingly, the process planning and calibration approaches for fabricating smooth up-facing surfaces in the MIP-SL process have been developed. Multiple test cases based on various types of curved surfaces have been performed. A comparison of the build results based on the traditional and the newly developed approaches illustrates the effectiveness of our method.     

饮用水源地污染物监控与应急预警机制

为实施流域饮用水资源有效保护,从技术管理层面分析流域水资源共享过程中标准体系的构成与作用。对现阶段实施的生活饮用水卫生标准、地表水环境质量标准和排水标准中涵盖的有机污染物进行对称性分析,指出标准体系中存在的技术风险以及生活污水和工业废水混排存在的管理风险,并针对管理风险提出应急预警对策。