Reusability of sewage sludge in clay bricks

Bricks produced from sewage sludge in different compositions were investigated. Results of the tests indicated that the sludge proportion is a key factor in determining the brick quality. Increasing the sludge content results in a decrease in brick shrinkage, bulk density, and compressive strength. Brick weight loss on ignition was mainly due to the contribution of the contained organic matter from the sludge being burnt off during the firing process, as well as inorganic substances found in both clay and sludge. The physical, mechanical, and chemical properties of the bricks that were supplemented with various proportions of dried sludge from 10 to 40wt% and generally complied with the General Specification for Brick as per the Malaysian Standard MS 7.6:1972, which dictates the requirements for clay bricks used in walling in general. A standard leaching test method also showed that the leaching of metals from the bricks is very low.     

Influences of Magnesium <Emphasis Type="Italic">tri-</Emphasis>Silicate on the Physical,Mechanical, and Degradable Properties of Ultraviolet (UV) Radiation Cured Plain Board Surface

A series of formulations were prepared with different percentages of oligomer, epoxy diacrylate (EA-1020 ), monomer, 1,6 Hexane diol diacrylate,(HDDA) and different percentages of filler (Magnesium tri-silicate, Mg₂Si₃O₈). Irgacure 369 [2-Benzyl-2-dimethyl-amine-1 (4-morpholinophenyl) butanone-1] was used in the formulations as photoinitiator. Ultraviolet (UV) cured thin polymer films were prepared from these formulating solutions on clean glass plates. Pendulum hardness (PH), gel content and macro scratch hardness (MSH) of the UV cured films were studied. One percent Mg₂Si₃O₈ containing formulation showed the premium properties. The substrates (plain board) were coated by these formulating solutions and cured under the same UV lamp at different intensities of radiation. Various properties of the coated surface such as PH, gloss, adhesion, abrasion and MSH were investigated. The base coat containing 1% Mg₂Si₃O₈ and top coat containing 48% HDDA produced the best performance among all the formulations inspected. The degradable properties in different weathering conditions on PH, gloss, adhesion, abrasion and MSH were measured. The surface cured with the optimized formulation (E) again yielded the minimum loss of the properties.     

Pore structure and adsorption properties of activated carbon prepared from granular molded waste paper

We have previously manufactured activated carbon using waste paper board, which was prepared by adding 8% phenol resin adhesive to torn waste newspaper and hot-pressing. In this study, the pretreatment process of the raw material was simplified; the waste paper was extruded to form granules. The activated carbon was manufactured by the carbon dioxide activation method using the granules as the raw material. The properties of the activated carbon were evaluated based on the pore structure, the iodine adsorption number, and the adsorption of toluene vapor in a sealed chamber. The activated carbon, which was manufactured at an activation temperature of 1100°C and a treatment time of 60min, exhibited a specific surface area of 1241m²/g and an iodine adsorption number of 1120mg/g. These results were similar to those obtained for two commercially available activated carbons. The extent of toluene vapor adsorption by this activated carbon was similar to that observed for the two commercial activated carbons over a period of 130min.     

Degradation of N,N'-dibutylurea (DBU) in soils treated with only DBU and DBU-fortified benlate fungicides

N,N'-dibutylurea (DBU) is a breakdown product of benomyl [methyl 1-(butylcarbamoyl)-2-benzimidazole carbamate], the active ingredient in Benlate fungicides, and has been proposed to cause crop damage after the use of Benlate 50 DF fungicide (DuPont, Wilmington, DE). Our research focused on DBU persistence after application into soil. We assessed DBU persistence on direct application of DBU (carbonyl-(14)C) at two concentrations (0.08 and 0.8 microg DBU kg(-1)) to seven soils and two potting mixes in soil microcosms incubated at various combinations of soil water potential (-0.03 or -0.1 MPa) and temperature (23, 33, 44 degrees C). For two soils at a subset of treatment variables we assessed DBU persistence in the presence of Benlate DF and SP fungicide formulations. Parent compounds, metabolites, and (14)CO(2) were tracked using chromatographic analysis with radioassay and UV detection, liquid scintillation counting, and post-extraction oxidation of the soil. DBU degradation was primarily microbial and for most soil-treatment combinations, half-lives were less than 2 wk. DBU degradation was retarded at the lower soil water potential and enhanced at 33 degrees C. In the presence of the formulation, DBU degradation was slower for one soil type. The longest half-life observed in any case was less than 7 wk; therefore, long-term persistence of DBU applied to soils through a Benlate application is very unlikely.     

Physiological and Biochemical Effects of Simulated Acid Rain on Phaseolus Vulgaris Var. HUR-15

Pot experiments were performed to determine the effects of simulated acid rain on Phaseolus vulgaris var. HUR-15. Seeds of Phaseolus vulgaris var. HUR-15 were exposed to simulated acid rain at pH values of 5.1, 4.1, 3.1, 2.1 and 1.1 and a control level of pH 6.8. Plants were harvested at three stages, i.e. pre, peak and post-flowering stages. Seedlings succumbed at pH 1.1. Necrosis developed on the leaves of plants treated with water of pH 2.1, resulting in adverse effect on chlorophyll content. They died after peak-flowering. Root and shoot length and dry weight were reduced with the lowering in pH. Carbohydrate, nitrogen and protein contents decreased with the decrease in pH level, adversely affecting their nutrient value.     

Aquatic Macroinvertebrate Diversity in Nanda Devi Biosphere Reserve,India

Aquatic macroinvertebrate diversity in the Nanda Devi Biosphere Reserve (NDBR) was monitored for a period of twelve months (September 2000 to August 2001). All the important hydrological attributes were measured monthly for one year. Macroinvertebrates were sampled from three sites (S¹$, S²$, & S³$) of the headwater stream Dhauliganga of NDBR. The present study revealed that the velocity of the water current, hydromedian depth, turbidity and dissolved oxygen in addition to nature and size of the bottom substrates have their significant impact on benthic invertebrate diversity. The ecological relevance of the measured hydrological attributes was investigated by comparing their degree of correlation with invertebrate density and diversity. Macroinvertebrate diversity was found to be highest (3.096 ± 0.03) in winter months (November–January) and lowest (2.816 ± 0.02) in monsoon months (July–August). The high diversity of macroinvertebrates may be due to low turbidity, high water transparency, optimum water temperature, high dissolved oxygen, low water velocity and suitable composition of the bottom substrates.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans from food salt samples processed by heat treatment in Korea

Eight samples of processed food salt collected from five plants in Korea were analyzed for 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) using liquid-liquid extraction, clean-up procedures, and high resolution gas chromatography-high resolution mass spectrometry. The study included the analyses of two kinds of salt product sample: bamboo-salt and parched salt. The levels of toxic PCDD/Fs found in the salt product samples were extremely low: the results revealed TEQ levels ranging between the sub pg TEQ/g and sub fg TEQ/g. The differences in the TEQ values of toxic PCDD/F were observed between the salt product samples, which were treated with different frequency of baking using four different fuels (firewood, pine wood, pine resin, and indirect heating by gas) at temperatures from 300 to 2000 degrees C. In bamboo-salt samples, the concentrations and TEQ values of toxic PCDD/Fs ranged between 0.57-66 pg/g and 5.7x10(-5)-0.64 pg TEQ/g, respectively. PCDD/Fs levels in bamboo-salts baked by firewood were found to be higher than those baked by pinewood or pine resin. In parched salt samples, the concentrations and TEQ values of toxic PCDD/Fs ranged between 0.97-3.7 pg/g and 0.0097-0.017 pg TEQ/g, respectively. The data was discussed regarding the concentration and the distribution pattern of congeners.     

Do mountain log skinks (<Emphasis Type="Italic">Pseudemoia entrecasteauxii</Emphasis>) modify their behaviour in the presence of two predators?

Prey often adopt antipredator strategies to reduce the likelihood of predation. In the presence of predators, prey may use antipredator strategies that are effective against a single predator (specific) or that are effective against several predators (nonspecific). Most studies have been confined to single predator environments although prey are often faced with multiple predators. When more than one predator is present, specific antipredator behaviours can conflict and avoidance of one predator may increase vulnerability to another. To test how prey cope with this dilemma, I recorded the behaviours of lizards responding to the nonlethal cues of a bird and snake presented singly and simultaneously. Lizards use specific and conflicting antipredator tactics when confronted with each predator, as evidenced by refuge use. However, when both predators were present, lizards refuge use was the same as in the predator-free environment, indicating that they abandoned refuge use as a primary mechanism for predator avoidance. In the presence of both predators, they reduced their overall movement and time spent thermoregulating. This shift in behaviour may represent a compromise to minimize overall risk, following a change in predator exposure. This provides evidence of plasticity in lizard antipredator behaviour and shows that prey responses to two predators cannot be accurately predicted from what is observed when only one predator is present.Communicated by W. Cooper     

A review of hypotheses for the functions of avian duetting

Avian duets are striking for the remarkable precision with which duetting partners sometimes coordinate their songs. Duetting species are taxonomically diverse, and the form of their duets varies. The reasons some birds duet when most do not remains unclear despite numerous hypotheses for its function. I review work done so far on duetting, discuss evidence for and against hypotheses for its functions, and highlight approaches useful for future research. The four hypotheses that appear most promising are that individuals join their partners songs to form duets: (1) to avoid being usurped from a partnership, (2) to prevent their partner being usurped, (3) as a collaborative display in defence of some resource, or (4) to signal commitment to their partner. These hypotheses are not mutually exclusive, and duetting is likely to have multiple roles both within and among species. However, much basic research is still required. Characteristics of duets have rarely been quantified in detail, and information about variability among species in the precision of duetting is necessary, not only to test hypotheses about function, but also to define duetting more precisely. Quantifying the relative frequencies of alternative vocal strategies (for example, remaining silent when a partner sings versus joining in to form a duet) between species and in different contexts will help to determine why partners coordinate their songs to form duets. Furthermore, social systems and sex roles in duetting species are poorly understood, yet understanding these is critical to determining the functions of avian duetting.Communicated by A. Cockburn