Degradation of N,N'-dibutylurea (DBU) in soils treated with only DBU and DBU-fortified benlate fungicides

N,N'-dibutylurea (DBU) is a breakdown product of benomyl [methyl 1-(butylcarbamoyl)-2-benzimidazole carbamate], the active ingredient in Benlate fungicides, and has been proposed to cause crop damage after the use of Benlate 50 DF fungicide (DuPont, Wilmington, DE). Our research focused on DBU persistence after application into soil. We assessed DBU persistence on direct application of DBU (carbonyl-(14)C) at two concentrations (0.08 and 0.8 microg DBU kg(-1)) to seven soils and two potting mixes in soil microcosms incubated at various combinations of soil water potential (-0.03 or -0.1 MPa) and temperature (23, 33, 44 degrees C). For two soils at a subset of treatment variables we assessed DBU persistence in the presence of Benlate DF and SP fungicide formulations. Parent compounds, metabolites, and (14)CO(2) were tracked using chromatographic analysis with radioassay and UV detection, liquid scintillation counting, and post-extraction oxidation of the soil. DBU degradation was primarily microbial and for most soil-treatment combinations, half-lives were less than 2 wk. DBU degradation was retarded at the lower soil water potential and enhanced at 33 degrees C. In the presence of the formulation, DBU degradation was slower for one soil type. The longest half-life observed in any case was less than 7 wk; therefore, long-term persistence of DBU applied to soils through a Benlate application is very unlikely.     

Removal of organic matter and nitrogen from river water in a model floodplain

A significant improvement in river water quality cannot be expected unless nonpoint-source contaminants are treated in addition to the further treatment of point-source contaminants. If river water is sprayed over a floodplain, the consequent water filtration through the sediment profile can simultaneously remove organic matter and nitrogen in the water through aerobic and denitrifying reactions. This hypothesis was tested using lysimeters constructed from polyvinyl chloride (PVC) pipe (150 cm long, 15 cm in diameter) packed with loamy sand floodplain sediment. Water was applied to the top of the lysimeters at three different flow rates (48, 54, and 68 mm d(-1)). Concentrations of NO3 and dissolved oxygen (DO), chemical oxygen demand (COD), and redox potential (Eh) in the water were measured as functions of depth after the system reached steady states for both water flow and reactions. At the rate of 68.0 mm d(-1), a reducing condition for denitrification developed below the 5-cm depth due to the depletion of O2 by organic matter degradation in the surface oxidizing layer; Eh and DO were below 205 mV and 0.4 mg L(-1), respectively. At a depth of 70 cm, COD and NO3-N concentration decreased to 5.2 and 3.8 mg L(-1) from the respective influent concentrations of 17.1 and 6.2 mg L(-1). Most biodegradable organic matter was removed during flow and further removal of NO3 was limited by the lack of an electron donor (i.e., organic matter). These results indicate that the floodplain filtration technique has great promise for treatment of contaminated river water.     

Does the selection of ISO 14001 registrars matter? Registrar reputation and environmental policy statements in China

This study investigates the relationship between characteristics of environmental policy statements and the reputations of ISO 14001 registrars who had performed certification audits of firms operating in mainland China. Three characteristics of environmental policy statements were examined: (1) The conformance of the policy to strict interpretations of the international standard; (2) The policy statement's adherence to the good practice guidelines specified in ISO 14004; and, (3) Self-reported evaluations of the policy statement's effectiveness as implemented. Data from 106 facilities in Beijing, Shanghai and Guangzhou reveal that registrar quality has a relatively weak, positive relationship with conformance to both ISO 14001 standards and to ISO 14004 guidelines, but no relationship was observed with the self-reported data. Additional findings are that the use of foreign registrars is significantly associated with the adoption of ISO 14004 guidelines and that conformance with ISO 14001 standards is somewhat higher for international joint ventures and foreign-owned firms than for state-owned enterprises.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans from food salt samples processed by heat treatment in Korea

Eight samples of processed food salt collected from five plants in Korea were analyzed for 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) using liquid-liquid extraction, clean-up procedures, and high resolution gas chromatography-high resolution mass spectrometry. The study included the analyses of two kinds of salt product sample: bamboo-salt and parched salt. The levels of toxic PCDD/Fs found in the salt product samples were extremely low: the results revealed TEQ levels ranging between the sub pg TEQ/g and sub fg TEQ/g. The differences in the TEQ values of toxic PCDD/F were observed between the salt product samples, which were treated with different frequency of baking using four different fuels (firewood, pine wood, pine resin, and indirect heating by gas) at temperatures from 300 to 2000 degrees C. In bamboo-salt samples, the concentrations and TEQ values of toxic PCDD/Fs ranged between 0.57-66 pg/g and 5.7x10(-5)-0.64 pg TEQ/g, respectively. PCDD/Fs levels in bamboo-salts baked by firewood were found to be higher than those baked by pinewood or pine resin. In parched salt samples, the concentrations and TEQ values of toxic PCDD/Fs ranged between 0.97-3.7 pg/g and 0.0097-0.017 pg TEQ/g, respectively. The data was discussed regarding the concentration and the distribution pattern of congeners.     

Operational characteristics of effective removal of H2S and NH3 waste gases by activated carbon biofilter

Simultaneous removal of hydrogen sulfide (H2S) and ammonia (NH3) gases from gaseous streams was studied in a biofilter packed with granule activated carbon. Extensive studies, including the effects of carbon (C) source on the growth of inoculated microorganisms and gas removal efficiency, product analysis, bioaerosol emission, pressure drop, and cost evaluation, were conducted. The results indicated that molasses was a potential C source for inoculated cell growth that resulted in removal efficiencies of 99.5% for H2S and 99.2% for NH3. Microbial community observation by scanning electron microscopy indicated that granule activated carbon was an excellent support for microorganism attachment for long-term waste gas treatment. No disintegration or breakdown of biofilm was found when the system was operated for 140 days. The low bioaerosol concentration emitted from the biofilter showed that the system effectively avoided the environmental risk of bioaerosol emission. Also, the system is suitable to apply in the field because of its low pressure drop and treatment cost. Because NH3 gas was mainly converted to organic nitrogen, and H2S gas was converted to elemental sulfur, no acidification or alkalinity phenomena were found because of the metabolite products. Thus, the results of this study demonstrate that the biofilter is a feasible bioreactor in the removal of waste gases.     

EPR characterization of the catalytic activity of clays for PCE removal by gamma-radiation induced by acid and thermal treatments

Clays from tidal flat sediments showed efficient catalytic activity in the decomposition of PCE by gamma-radiation. The highest PCE removal of 98.6% was obtained with clays heated to 700 degrees C after acid treatment. The improved catalytic activity was identified by electron paramagnetic resonance (EPR) spectroscopy. The EPR spectra of clays were significantly changed by the acid and thermal treatments. The intensity of a narrow signal at g=2 (signal III) was decreased with increasing thermal treatment temperature and this increased the PCE removal efficiency. The acid treatment completely removed a broad signal at g=2 (signal II), decreased the intensity of signal III, and improved the gamma-radiation treatment of PCE.     

A dynamic compartment model for assessing the transfer of radionuclide deposited onto flooded rice-fields

A dynamic compartment model has been studied to estimate the transfer of radionuclides deposited onto flooded rice-fields after an accidental release. In the model, a surface water compartment and a direct shoot-base absorption from the surface water to the rice-plant, which are major features discriminating the present model from the existing model, has been introduced to account for the flooded condition of rice-fields. The model has been applied to the deposition experiments of 137Cs on rice-fields that were performed at three different times to simulate the deposition before transplanting (May 2) and during the growth of the rice (June 1 and August 12), respectively. In the case of the deposition of May 2, the root-uptake is the most predominant process for transferring 137Cs to the rice-body and grain. When the radionuclide is applied just after transplanting (June 1), the activity of the body is controlled by the shoot-base absorption and the activity of the grain by the root-uptake. The deposition just before ear-emergence (August 12) shows that the shoot-base absorption contributes entirely to the increase of both the activities of the body and grain. The model prediction agrees within one or two factors with the experimental results obtained for a respective deposition experiment.     

The adsorption characteristics of heavy metals by various particle sizes of MSWI bottom ash

The incineration rate of municipal solid waste (MSW) has been increased because of difficulty in securing a proper disposal site for MSW in Korea. The advantage of incineration is reduction of the volume of waste; however, significant amounts of bottom ash and fly ash were generated in the incineration process. Their treatment has attracted growing interest because of the potential toxicity of hazardous heavy metals. Generally, heavy metals are less released from bottom ash than from fly ash. In this study the adsorption characteristics of heavy metals were investigated using various particle sizes of MSWI bottom ash. Since bottom ash has a broad particle size distribution, it was sieved to size classes of +20, -20, -48, -80, -100 mesh. Cation exchange capacity (CEC) was analyzed by the ammonium acetate method to evaluate the potential as an adsorbent. The CEC values and surface areas increase as the range of particle size becomes finer. The adsorption experiment was conducted using synthetic (Cu and Ni) and plating rinse water as a function of reaction time (10-180 min), liquid/solid ratio (2-100) and particle size (+20 to -100 mesh), respectively. The adsorption rate increased with decreasing particle size and with increasing liquid/solid ratio; however, the removal efficiency of Cu was higher than that of Ni. In the case of plating rinse water, the adsorption rate decreased sharply at high liquid/solid ratio, and it showed over 80% of adsorption rates for Cu and Ni at an initial pH of 3.